Sagola 4100 Xtreme Ceramic Pressure Spray Gun with 78 Air Cap and 1.40 mm Nozzle (tungsten carbide)
€951.45
€799.54*
Price excl. VAT
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- 4100 Xtreme Ceramic pressure spray gun with fluid inlet
- 4100 Xtreme air cap 78
- Tungsten carbide needle & nozzle kit 1.40 mm
- Key assembly for changing the air valve
- Cleaning brush and wrench
Sagola 4100 Xtreme Ceramic – the pressure gun for abrasive materials
Ceramics, enamels, glass-ceramics and highly filled coatings wear out stainless steel nozzles quickly. The Sagola 4100 Xtreme Ceramic therefore uses a tungsten carbide needle and nozzle – for maximum service life with highly abrasive products and high film builds. At the same time it combines speed and high transfer with the fine finish of Xtreme atomisation.
Fluid is fed from a pressure pot or pump. Seven versions cover the range – from high-quality topcoats with 1.40 mm to high-flow ceramic products with 2.80 mm.
At a glance
- Tungsten carbide needle and nozzle: maximum wear resistance with abrasive products
- For high film builds: nozzles up to 2.80 mm, air caps 62, 63C, 64 and 67
- For pressure pots and pumps: fluid inlet, filter 60 or 100 mesh
- Rugged: forged, anodised aluminium body, automatic packing gland
- Explosion-proof: ATEX II 2G for zones 1 and 2
Versions compared
| Air cap | Nozzle (mm) | Air consumption at 2 bar | Recommended pressure | Recommended for |
|---|---|---|---|---|
| 78 | 1.40 | 410 l/min | 0.5–1.0 bar | high-quality finishes |
| XT03 | 1.40 | 460 l/min | 1.0–1.5 bar | high-transfer finishes |
| 67 | 1.80 | 400 l/min | 2.0–2.5 bar | primers and special abrasive products |
| 64 | 2.20 | 390 l/min | 2.0–2.5 bar | primers and fonds, high film thickness |
| 64 | 2.50 | 390 l/min | 2.0–2.5 bar | primers and fonds, high film thickness |
| 62 | 2.80 | 340 l/min | 2.0–2.5 bar | fillers, high viscosity |
| 63C | 2.80 | 450 l/min | 2.0–2.5 bar | ceramic products, high flow |
Good to know
- The 4100 Xtreme Ceramic works at a recommended working pressure of 3–4 bar – higher than the X 4100 series (2–3 bar).
- Spray distance 18–20 cm, with the XT03 air cap 12–15 cm.
- Air caps and tungsten carbide kits can be retrofitted individually.
| Nozzle size: | 1,4 mm |
|---|---|
| Nozzle type: | Wolframkarbid |
- Product number: 2151509
- Manufacturer: Elcometer
- Weight: 0.81 kg
- Length: 245 mm
- Width: 140 mm
- Height: 75 mm
Technical details
This version
| Manufacturer order number | PG10152130 |
| Air cap | 78 |
| Needle & nozzle kit | 1.40 mm, tungsten carbide |
| Air consumption at 2 bar | 410 l/min |
| Recommended pressure | 0.5–1.0 bar |
| Spray distance | 18–20 cm |
| Recommended for | high-quality finishes |
Sagola 4100 Xtreme Ceramic – general
| Manufacturer order number | PG10152130 to PG10152136 (per version) |
| Type | Pressure spray gun, fluid feed from pressure pot or pump |
| Needle and nozzle | tungsten carbide |
| Air inlet | BSP 1/4" male |
| Recommended working pressure | 3–4 bar |
| Max. air inlet pressure | 8 bar |
| Fluid filter | 60 or 100 mesh |
| Weight | 552 g |
| Dimensions | 19 × 20 cm, handle width 1.9 cm |
| Materials in contact with fluid | anodised and chromed aluminium, POM, stainless steel, Teflon, nylon |
| Sound pressure level | 80 dB |
| Operating temperature | 0–60 °C |
| Explosion protection | ATEX II 2G – suitable for hazardous zones 1 and 2 |
Further manufacturer information
Manufacturer: SAGOLA S.A., Vitoria-Gasteiz (Spain), distributed by Elcometer – beschicht is an authorised Sagola dealer.
Spare parts: air caps 78 (PT56418590), XT03 (PT56418566), 67 (PT56418568), 64 (PT56418570), 62 (PT56418567), 63C (PT56418659); tungsten carbide needle & nozzle kits 1.40 mm (PT10010146), 1.80 mm (PT10010148), 2.20 mm (PT10010149), 2.50 mm (PT10010162), 2.80 mm (PT10010150).
Downloads
Register
