Elcometer Qualicoat Powder Coating Inspection Kit Top
€17,137.79
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Elcometer 480 Glossmeter 60°, Model T
- Elcometer 1506 Mandrel Bend Tester with 5 mm and 8 mm mandrels
- Elcometer 1615 Impact Tester: base unit and tube assembly with Kit B to ISO 6272-2 and BS 6496
- Elcometer 1620 Manual Cupping Tester with digital gauge
- Elcometer 215 Oven Temperature Profiling System with thermal barrier
- Elcometer 456 Separate Coating Thickness Gauge, Model T, Ferrous/Non-Ferrous (FNF), with FNF standard probe 0–1500 µm (0–60 mils)
- Elcometer 1542 Cross Cut Set 6 × 1, 2 and 3 mm with ISO or ASTM adhesive tape
- Sturdy carry case
- Operating instructions for the individual instruments
Elcometer Qualicoat Powder Coating Inspection Kit Top
Qualicoat brings the ideals of several national coating associations together in one quality label for powder coatings on aluminium architectural components.
The kit contains the instruments for the required quality control tests: gloss, bend, impact, cupping, oven temperature, coating thickness and adhesion. The Top version includes the Elcometer 480 Model T and the Elcometer 456 FNF Model T with separate probe.
At a glance
- All in one case: matched Elcometer instruments, safely stored
- Measurement parameters: appearance (gloss), impact and deformation, oven temperature, dry film thickness, adhesion
- Standards: can be used to ISO, ASTM, SSPC, IMO and more (see Technical details)
- Version: Top
| Field of application: | Pulverbeschichtung |
|---|---|
| Item type: | Inspektionsset |
- Product number: 1040027
- Manufacturer: Elcometer
Technical details
| Manufacturer order number | YKITQUALICOAT-1T |
| Version | Top |
| Contents | Elcometer 480 Glossmeter 60°, Model T; Elcometer 1506 Mandrel Bend Tester with 5 mm and 8 mm mandrels; Elcometer 1615 Impact Tester: base unit and tube assembly with Kit B to ISO 6272-2 and BS 6496; Elcometer 1620 Manual Cupping Tester with digital gauge; Elcometer 215 Oven Temperature Profiling System with thermal barrier; Elcometer 456 Separate Coating Thickness Gauge, Model T, Ferrous/Non-Ferrous (FNF), with FNF standard probe 0–1500 µm (0–60 mils); Elcometer 1542 Cross Cut Set 6 × 1, 2 and 3 mm with ISO or ASTM adhesive tape |
| Standards | Qualicoat specification (tests: gloss, bend, impact, cupping, oven temperature, coating thickness, adhesion) |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Downloads
Register
