Elcometer Protective Inspection Kit for Hazardous Areas – imperial
€2,212.04
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Elcometer 128 Pictorial Standards SSPC VIS 1-01 and VIS 3
- Elcometer 125 Surface Comparator, Grit
- Elcometer 125 Surface Comparator, Shot
- Elcometer 122 Testex Replica Tape Coarse, 20–64 µm (0.8–2.5 mils), and X-Coarse, 38–115 µm (1.5–4.5 mils)
- Elcometer 124 Testex Dial Thickness Gauge
- Elcometer 131/1C Telescopic Inspection Mirror
- Elcometer 134 Chlor*Test Surface Testing Kit
- Elcometer 113 Magnetic Thermometer °C (°F)
- Elcometer 116 Whirling Hygrometer, °C
- Elcometer 114 Dewpoint Calculator
- Elcometer 112 Hexagonal Wet Film Comb, 25–3000 µm (1–120 mils)
- Elcometer 211 Thickness Gauge (mechanical)
- Elcometer 107 Cross Hatch Full Kit with ISO (ASTM) tape, brush and eye glass
- Sturdy carry case
- Operating instructions for the individual instruments
Elcometer Protective Inspection Kit for Hazardous Areas – imperial
Elcometer inspection kits bring together the instruments an inspector needs on site in a sturdy, lightweight carry case – so you can reliably check that a coating is being, or has been, applied correctly, without guesswork.
The kit contains only mechanical and chemical test equipment without electronics – for profile, surface contamination, climate, wet and dry film thickness and adhesion. Important: the products in this kit are not tested and approved for use in hazardous areas; consult site management before use.
At a glance
- All in one case: matched Elcometer instruments, safely stored
- Measurement parameters: surface inspection, surface profile, surface contamination, climatic conditions, wet film thickness, dry film thickness, adhesion
- Standards: can be used to ISO, ASTM, SSPC, IMO and more (see Technical details)
- Version: imperial
| Field of application: | Gefahrenbereich |
|---|---|
| Item type: | Inspektionsset |
- Product number: 1040021
- Manufacturer: Elcometer
Technical details
| Manufacturer order number | YKIT-HAZARD-1E |
| Version | imperial |
| Case dimensions | 495 × 420 × 175 mm |
| Contents | Elcometer 128 Pictorial Standards SSPC VIS 1-01 and VIS 3; Elcometer 125 Surface Comparator, Grit; Elcometer 125 Surface Comparator, Shot; Elcometer 122 Testex Replica Tape Coarse, 20–64 µm (0.8–2.5 mils), and X-Coarse, 38–115 µm (1.5–4.5 mils); Elcometer 124 Testex Dial Thickness Gauge; Elcometer 131/1C Telescopic Inspection Mirror; Elcometer 134 Chlor*Test Surface Testing Kit; Elcometer 113 Magnetic Thermometer °C (°F); Elcometer 116 Whirling Hygrometer, °C; Elcometer 114 Dewpoint Calculator; Elcometer 112 Hexagonal Wet Film Comb, 25–3000 µm (1–120 mils); Elcometer 211 Thickness Gauge (mechanical); Elcometer 107 Cross Hatch Full Kit with ISO (ASTM) tape, brush and eye glass |
| Standards | AS 3894.3-A, AS 3894.5, ASTM D 2200, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-A, ASTM D 4417-C, BS 7079-C5, IMO MSC.215(82), IMO MSC.244(83), ISO 16276-2, ISO 2178, ISO 2409, ISO 2808-1A, ISO 2808-7A, ISO 8501-1, ISO 8502-5, ISO 8503-1, ISO 8503-2, ISO 8503-5, NACE RP0287, SSPC Guide 15, SSPC PA 2, SSPC VIS 1–5, US Navy NSI 009-32, US Navy PPI 63101-000 |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Downloads
Register
