Elcometer Protective Coatings Inspection Kit 3 Standard – imperial
€3,797.48
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Elcometer 224 Digital Surface Profile Gauge, Model B, integral
- Elcometer 319 Digital Dewpoint Meter, Standard
- Elcometer 115 Wet Film Combs, set of 4
- Elcometer 107 Cross Hatch Full Kit with 6 × 1 mm cutter
- Elcometer 456 Separate Coating Thickness Gauge, Model T, Ferrous/Non-Ferrous (FNF), with FNF standard probe 0–1500 µm (0–60 mils)
- ElcoMaster® data management software and USB cable
- Sturdy carry case
- Operating instructions for the individual instruments
Elcometer Protective Coatings Inspection Kit 3 Standard – imperial
Elcometer inspection kits bring together the instruments an inspector needs on site in a sturdy, lightweight carry case – so you can reliably check that a coating is being, or has been, applied correctly, without guesswork.
The comprehensive digital kit: all instruments for profile, climate and dry film thickness store readings and transfer them via Bluetooth® to ElcoMaster® on PC or Android™ – for instant analysis and paperless quality assurance. With the Elcometer 456 Model T for ferrous and non-ferrous (FNF).
At a glance
- All in one case: matched Elcometer instruments, safely stored
- Measurement parameters: surface profile, climatic conditions, wet film thickness, dry film thickness, adhesion
- Standards: can be used to ISO, ASTM, SSPC, IMO and more (see Technical details)
- Paperless QA: transfer readings via USB/Bluetooth® to ElcoMaster® and create reports
- Version: Standard, imperial
| Item type: | Korrosionsschutzkoffer |
|---|
- Product number: 1040014
- Manufacturer: Elcometer
- Weight: 7.2 kg
Technical details
| Manufacturer order number | YKIT-PROTECTIVE-3SE |
| Version | Standard, imperial |
| Case dimensions | 456 × 384 × 127 mm |
| Contents | Elcometer 224 Digital Surface Profile Gauge, Model B, integral; Elcometer 319 Digital Dewpoint Meter, Standard; Elcometer 115 Wet Film Combs, set of 4; Elcometer 107 Cross Hatch Full Kit with 6 × 1 mm cutter; Elcometer 456 Separate Coating Thickness Gauge, Model T, Ferrous/Non-Ferrous (FNF), with FNF standard probe 0–1500 µm (0–60 mils); ElcoMaster® data management software and USB cable |
| Standards | AS 1580.408.4, AS 2331.1.4, AS 3894.3-B, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-B, ASTM D 4417-C, ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-6B, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 5411-3, BS 5599, BS 7079-B4, BS 7079-C5, DIN 50981, DIN 50984, ECCA T1, ECCA T6, EN 13523-1, EN 13523-6, IMO MSC.215(82), IMO MSC.244(83), ISO 1461, ISO 16276-2, ISO 19840, ISO 2063, ISO 2360, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, ISO 8502-4, ISO 8503-5, JIS K 5600-5-6, NACE RP0287, NF T30-038, NF T30-124, NF T30-125, SANS 5772, SS 184159, SSPC PA 2, US Navy NSI 009-32, US Navy PPI 63101-000 |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Downloads
Register
