Elcometer Tungsten Carbide 45° Angled Liner Nozzle with Aluminium Jacket
€132.71
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Blast nozzle in the selected size
- Rubber gasket for nylon nozzle holders
45° angled nozzle – blasting in hard to reach places
The angled nozzle is ideal for getting inside tight or hard to reach places such as behind flanges and ledges, around corners, inside cavities or inside pipes. It is compact, shoots out the abrasive at a 45° angle and has an aluminium jacket providing strength and endurance. Depending on the version, 1, 2 or 3 holes distribute the blast. Supplied with a rubber gasket.
A larger orifice produces a greater blast coverage area but needs more air capacity from the compressor; a smaller orifice gives a narrower pattern and uses less air. As a general rule, replace the nozzle when the orifice has worn by one nozzle size – easy to check with the Elcometer 103 Blast Nozzle Gauge.
At a glance
- 45° exit: reaches flanges of beams, cavities and pipe interiors
- Compact: only 88 mm long
- Choice of holes: 1, 2 or 3 outlet holes with orifice #4 or #6
- 2" contractor thread: the industry standard at 4½ TPI – greatly reduces cross threading, easy to attach, safer at high pressure
- With rubber gasket: for nylon nozzle holders; aluminium holders come with their own gasket
Sizes compared
| No. | Orifice | Holes | Length | Entry | Thread | Order number |
|---|---|---|---|---|---|---|
| #4 | 6.35 mm (1/4") | 1 | 88 mm | 25 mm (1") | 2" contractor | MT28442-4C |
| #4 | 6.35 mm (1/4") | 2 | 88 mm | 25 mm (1") | 2" contractor | MT28443-4C |
| #4 | 6.35 mm (1/4") | 3 | 88 mm | 25 mm (1") | 2" contractor | MT28444-4C |
| #6 | 9.5 mm (3/8") | 1 | 88 mm | 25 mm (1") | 2" contractor | MT28442-6C |
| #6 | 9.5 mm (3/8") | 2 | 88 mm | 25 mm (1") | 2" contractor | MT28443-6C |
| #6 | 9.5 mm (3/8") | 3 | 88 mm | 25 mm (1") | 2" contractor | MT28444-6C |
Which bore lining is right?
- Tungsten carbide (TC): relatively inexpensive and impact resistant – ideal where rough handling cannot be avoided and with mineral, glass or coal slag abrasives
- Silicon carbide (SC): impact resistant and durable like tungsten carbide, but approximately one third of the weight – ideal for long blasting periods
- Silicon nitride (SN): outstanding wear resistance and up to 50 % lighter than other nozzles of the same size – reduces operator fatigue
- Boron carbide (BC): extremely hard wearing, up to ten times the longevity of tungsten carbide – ideal for aggressive abrasives
- Product number: 2151983
- Manufacturer: Elcometer
Technical details
| Manufacturer order numbers | MT28442-4C, MT28443-4C, MT28444-4C, MT28442-6C, MT28443-6C, MT28444-6C |
| Bore lining | Tungsten carbide (TC) |
| Jacket | Aluminium |
| Bore shape | 45° angled, 1–3 holes |
| Thread | 2" (51 mm) contractor thread |
| Entry diameter | 25 mm (1") |
| Nozzle sizes | #4, #6 (6.35–9.5 mm) |
| Lengths | 88 mm |
| Supplied with rubber gasket | yes |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Matching accessories: replacement rubber gaskets (MT29212-…), aluminium (ANH-…) and nylon (NNH-…) blast nozzle holders, Elcometer 103 Blast Nozzle Gauge.
Downloads
Register
