Elcometer Sagola 3300 GTO flow cup spray gun with 62S air cap and 2.80 mm stainless steel needle and nozzle kit
€300.78
€252.76*
Price excl. VAT
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
SAGOLA 3300 GTO Spray Gun – Professional paint spray gun with high-transfer technology for bodyshops, industry, woodwork and decorative applications (TECH/HVLP/EVO/EPA/64S/62S)
The SAGOLA 3300 GTO is a high-quality, versatile spray gun in the mid-to-high-end segment and was developed as a fusion of two tried-and-tested product ranges: the 3300 PRO (industry) and the 4100 GTO (body shop). The result is a spray gun that combines robustness, ergonomics and finish performance in a single system – ideal for users who require consistent surface quality and high process reliability in their day-to-day work.
The new forged, anodised aluminium body is deliberately designed for low weight whilst ensuring maximum stability. Combined with the ergonomic handle and the stainless steel trigger, the 3300 GTO enables comfortable, fatigue-free working – even during long shifts.
At the heart of the system are the high-transfer nozzle sets and the new aluminium air caps (TECH/HVLP/EVO/EPA), which ensure ultra-fine atomisation, wide spray patterns and highly controlled spray behaviour. This reduces overspray, improves material utilisation and ensures a clean, uniform finish. Depending on the system, the spray gun achieves a product transfer efficiency of at least 65% to 75%.
Thanks to the different systems available, the 3300 GTO can be tailored very precisely to the application: TECH (maximum speed & performance in the bodyshop), HVLP (maximum savings & minimal mist), EVO (speed & efficiency in industry/woodworking), EPA (minimum air consumption with excellent finishes), as well as 64S/62S for high-viscosity materials with large nozzle sizes.
For many users, the 3300 GTO is also an attractive professional alternative to SATA (and comparable premium spray guns), when looking for a spray gun that offers excellent atomisation, high transfer efficiency and practical robustness – combined with a very impressive value for money and the ability to tailor the spray pattern to the specific material and process using various air cap systems.
Particularly practical: on the Bodyshop-TECH/HVLP variants, the RC2 air flow regulator with an analogue pressure gauge is provided as a useful setup for adjusting the working pressure safely and reproducibly (ideal for consistent results).
- Forged, anodised aluminium body – lightweight, robust, corrosion-resistant
- High-Transfer System (min. 65–75 per cent) – less overspray, efficient use of material
- New aluminium air caps – ultra-fine atomisation & large spray patterns for high-quality finishes
- Low-maintenance & durable – simplified design, fewer parts, quick cleaning
Details & information
Product features
The 3300 GTO has been developed for users who want a spray gun for everyday use that operates reliably, can be adjusted quickly and is easy to clean – without compromising on surface quality.
- Body made from forged, anodised aluminium – high durability, corrosion-resistant, easy to clean
- Stainless steel needle & stainless steel nozzle – durable, consistent material flow, stable with varying materials
- New aluminium air caps (TECH/HVLP/EVO/EPA) – optimised aerodynamics for finer atomisation and wide spray patterns
- High-Transfer Technology – efficient application, reduced overspray, clean edges and better material utilisation
- Ergonomic design – excellent balance, comfortable grip, reduces fatigue during daily use
- Low-maintenance design – fewer components and a service-friendly construction for quick cleaning
- Single-shaft system – simplified mechanics, synchronised operation, reduced maintenance requirements
- Automatic packing / packing gland – precise fit, reduces the risk of needle damage, facilitates clean disassembly
- Colour coding (Colour Identifier) – quick identification within the team (e.g. by painter / process / nozzle set)
- RC2 air flow regulator (Bodyshop TECH/HVLP) – precise pressure control and reproducible results thanks to an analogue pressure gauge
Air consumption / fan pattern / spray distance (system comparison):
TECH: 290 L/min | 290–300 mm | 18–20 cm (fast, performance-oriented)
HVLP: 360 L/min | 290–300 mm | 12–15 cm (maximum savings, minimum mist)
EPA: 240 L/min | 250 mm | max. 18 cm (min. air consumption, excellent finishes)
EVO: 320 L/min | 280 mm | max. 18 cm (speed & efficiency in industry/woodworking)
Standards & Approvals (extract): CE, EN 1953, ATEX II 2 GX, SQMDA 1151, SQMDA 1136.
Overview of variants
The SAGOLA 3300 GTO has a modular design: you select the system (air cap) and the appropriate nozzle size (mm) according to the material, desired finish and working style. As a general rule, smaller nozzles are used for finer finishes (clear coat/topcoat) and larger nozzles for filler/primer or high-viscosity products. The variants listed below correspond exactly to the typical system areas: bodyshop (TECH/HVLP), industry/wood/decor (EVO/EPA/HVLP) and high viscosity (64S/62S).
| Variant / Designation | Design | Suitable for |
|---|---|---|
| TECH air cap & 1.20 mm | GTO TECH (Body shop – High speed & Maximum spray quality) | For very fine finishes and controlled application (e.g. clear coat where high quality is required). |
| TECH Air Cap & 1.30 mm | GTO TECH (body shop) | Universal use in the bodyshop: clear coat/HS-MS and topcoat, when a good balance of speed and control is required. |
| TECH air cap & 1.40 mm | GTO TECH (body shop) | For users who want a higher material throughput when applying topcoats/single-stage finishes or slightly thicker coats. |
| HVLP air cap & 1.20 mm | GTO HVLP (Body Shop – Max. saving / Min. mist) | For very fine finishes with maximum savings and minimal mist – particularly suitable for work carried out near spray booths. |
| HVLP air cap & 1.30 mm | GTO HVLP (Bodyshop) | Very well-balanced – ideal for even application (including water-based base coats). |
| HVLP air cap & 1.40 mm | HVLP (Industrial/Wood/Decor) | For finishes and primers, with a focus on material economy and a clean spray pattern. |
| HVLP air cap & 1.60 mm | HVLP (Industrial/Wood/Decorative) | For primers/fillers or higher viscosity when higher throughput is required – whilst still maintaining low overspray. |
| HVLP air cap & 1.80 mm | HVLP (Industrial/Wood/Decorative) | For thicker primers/fillers and greater film thicknesses – when a high application rate is required. |
| EVO air cap & 1.30 mm | 3300 EVO (High application speed / Maximum spray quality) | For industrial and wood finishes, where high productivity needs to be combined with excellent atomisation. |
| EVO air cap & 1.40 mm | 3300 EVO | Very well-balanced for topcoats and clear coats in industrial and wood applications – a good balance between application and finish. |
| EVO air cap & 1.60 mm | 3300 EVO | For primers/fillers in faster production runs – when throughput and speed are key. |
| EPA air cap & 1.40 mm | 3300 EPA (minimum air consumption / excellent finishes) | For users who wish to reduce air consumption whilst maintaining an excellent finish (e.g. continuous use, energy-efficient operation). |
| EPA air cap & 1.60 mm | 3300 EPA | Highly efficient for primers/fillers – when material flow is required but air intake needs to remain low. |
| EPA air cap & 1.80 mm | 3300 EPA | For thicker coats/more viscous media – with a focus on low air consumption. |
| 64S air cap & 2.20 mm | 64S (High Viscosity) | For high-viscosity products where standard nozzles do not provide sufficient flow rate and a stable material flow is required. |
| 62S air cap & 2.80 mm | 62S (High Viscosity – maximum flow rate) | For very viscous materials and high film thicknesses – where maximum throughput is required (e.g. wood/industrial applications). |
Accessories/Variants: In addition to air cap and nozzle sizes, we offer suitable accessories to optimally tailor the spray gun to your process – particularly useful for reproducible pressure settings, clean filtration and convenient handling: RC2 air flow regulator with analogue pressure gauge, 650 ml plastic gravity cup, aluminium gravity cup and mini product filters (pack of 10).
Nozzle sets (nozzle + needle) – selection guide
The 3300 GTO operates with nozzle sets (nozzle + needle). This ensures that the nozzle and needle are optimally matched, which has a direct impact on atomisation, material flow and surface quality. Choosing the right combination helps to prevent runs, reduce overspray and build up a uniform finish.
- 1.20 – 1.30 mm: very fine finishes (clear coat, high-quality topcoats, clean texture)
- 1.40 mm: universal (topcoat, clear coat, good balance between application and control)
- 1.60 – 1.80 mm: primers/fillers, higher viscosity, higher throughput
- 2.20 – 2.80 mm: high-viscosity products with 64S/62S air caps (maximum material flow)
If you could just let me know whether you’re using clear coat, water-based paint, topcoat, filler or a high-viscosity material (and your desired application thickness), I can recommend the right combination of air cap and nozzle size.
Tip: HVLP is ideal if you want to save material and minimise overspray. TECH is the choice for maximum speed and very high performance in the bodyshop. EPA is recommended if air consumption needs to be particularly low, whilst EVO is often the best mix of speed and finish in industrial and woodworking applications.
Intended use / Applications
The 3300 GTO is a true all-round system because it covers a wide range of applications. The key factor is the combination of air cap (spray pattern) and nozzle size (material flow rate).
- Body shop / vehicle painting: HS/MS clear coats, single-stage, water-based, metallics, silver/pearlescent (TECH/HVLP)
- Industry: Topcoats, clear coats, industrial paints, primers – robust, reproducible, efficient (EVO/EPA/HVLP)
- Wood & furniture: paints/clear coats, water-based systems, solvent-based systems – good finishes and high throughput (EVO/EPA)
- Decorative: very clean finishes with reduced air consumption (EPA)
- Primers/fillers: larger nozzle sizes for material build-up and uniform film thicknesses (HVLP/EVO/EPA 1.60–1.80)
- High-viscosity products: when maximum flow rate is required (64S 2.20 / 62S 2.80)
- Series production: low-maintenance design & quick cleaning – ideal for daily use
The 3300 GTO is particularly well-suited wherever finish quality, material efficiency and process reliability are all required simultaneously – from the workshop to industrial production runs.
Product leaflet
Further details on the SAGOLA 3300 GTO (systems, technical data, air caps, nozzle sets, accessories and spare parts) can be found in the manufacturer’s documentation (brochure). View the 3300 GTO brochure (PDF)
| Air cap type: | 62S |
|---|---|
| Nozzle size: | 2,8 mm |
- Product number: 2151221
- Manufacturer: Elcometer
- Weight: 0.996 kg
- Length: 243 mm
- Width: 135 mm
- Height: 143 mm
Technical details
| Nozzle sizes | 1.20 mm · 1.40 mm · 1.60 mm · 1.80 mm |
| Aircap options | HVLP · EPA · TECH |
| Working pressure | 2.0 – 2.5 bar (depending on the air cap) |
| Air consumption | 270 – 340 l/min |
| Parts in contact with material | Stainless steel, POM, Teflon, nylon |
| Cup holder | Gravity feed connection (flow cup) |
| Weight | approx. 540 g (excluding beaker) |
| Applications | Automotive · Wood · Metal · Industrial painting |
Register
