Elcometer 122 Testex® Replica Tape X-Coarse, 38–115 µm – 1 Roll (50 Tests)
€95.95
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- 1 roll Elcometer 122 Testex® Replica Tape X-Coarse (50 tests)
Elcometer 122 Testex® Replica Tape X-Coarse – blast profile 38–115 µm
The Elcometer 122 Testex® Replica Tape determines the peak-to-valley profile of blast cleaned steel surfaces quickly and in a way you can document. The tape consists of foam with a non-compressible backing: when the foam side is rubbed onto the surface, it forms a permanent mould of the profile.
The replica thickness is measured with a micrometer such as the Elcometer 124; subtracting the 50 µm backing gives the profile height. The X-Coarse grade covers profiles of 38–115 µm (1.5–4.5 mils). If the value lies between 38 and 64 µm, measure with Coarse and X-Coarse and average both values. The replica can be kept as a record.
At a glance
- Range: 38–115 µm (1.5–4.5 mils) peak-to-valley
- Traceable: permanent mould of the surface profile as a record
- Standards: incl. ISO 8503-5, ASTM D4417 Method C, SSPC-PA 17
- Contents: 1 roll with 50 tests
- Product number: 90000032
- Manufacturer: Elcometer
Technical details
| Manufacturer order number | E122----C1 |
| Grade | X-Coarse |
| Range | 38–115 µm (1.5–4.5 mils) |
| Tests per roll | 50 |
| Evaluation | micrometer, reading minus 50 µm |
| Standards | ISO 8503-5, ASTM D4417-C, SSPC-PA 17 |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Downloads
Register