Elcometer 122 Testex® Replica Tape Coarse, 20–64 µm – 1 Roll (50 Tests)
€95.95
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- 1 roll Elcometer 122 Testex® Replica Tape Coarse (50 tests)
Elcometer 122 Testex® Replica Tape Coarse – blast profile 20–64 µm
The Elcometer 122 Testex® Replica Tape determines the peak-to-valley profile of blast cleaned steel surfaces quickly and in a way you can document. The tape consists of foam with a non-compressible backing: when the foam side is rubbed onto the surface, it forms a permanent mould of the profile.
The replica thickness is measured with a micrometer such as the Elcometer 124; subtracting the 50 µm backing gives the profile height. The Coarse grade covers profiles of 20–64 µm (0.8–2.5 mils). If the value lies between 38 and 64 µm, measure with Coarse and X-Coarse and average both values. The replica can be kept as a record.
At a glance
- Range: 20–64 µm (0.8–2.5 mils) peak-to-valley
- Traceable: permanent mould of the surface profile as a record
- Standards: incl. ISO 8503-5, ASTM D4417 Method C, SSPC-PA 17
- Contents: 1 roll with 50 tests
- Product number: 90000031
- Manufacturer: Elcometer
Technical details
| Manufacturer order number | E122----B1 |
| Grade | Coarse |
| Range | 20–64 µm (0.8–2.5 mils) |
| Tests per roll | 50 |
| Evaluation | micrometer, reading minus 50 µm |
| Standards | ISO 8503-5, ASTM D4417-C, SSPC-PA 17 |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Downloads
Register