Elcometer Black hose tape for fixing the Twinline to the blast hose (1 roll)
€8.25
€6.93*
Price excl. VAT
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Elcometer Black hose tape for fixing the Twinline to the blast hose (1 roll)
Elcometer Twinline Remote Control Hose 6 mm (¼") with Accessories
The tough Elcometer Twinline control hose with 6 mm (¼") ID connects the deadman’s handle to the remote control valve. As a twin line it prevents tangles and trip hazards compared with using single lines along the blast hose.
Available in 5, 10 and 20 m with 6 mm (¼") female swivel couplings to fit directly to the deadman’s handle and valve, and as a 40 m reel without couplings. Working pressure 20 bar (290 psi), burst pressure 60 bar (870 psi).
At a glance
- Genuine Elcometer part: with manufacturer part number for every part
- Choice: 7 versions
Versions at a glance
| Version | Order number |
|---|---|
| Twinline remote control hose 5 m (16.4 ft), 6 mm (¼") ID, yellow/green, with 6 mm swivel couplings | TWINLINE-5B |
| Twinline remote control hose 10 m (32.8 ft), 6 mm (¼") ID, yellow/green, with 6 mm swivel couplings | TWINLINE-10B |
| Twinline remote control hose 20 m (65.6 ft), 6 mm (¼") ID, yellow/green, with 6 mm swivel couplings | TWINLINE-20B |
| Twinline remote control hose 40 m (131 ft), 6 mm (¼") ID, yellow/green, without couplings | TWINLINE |
| Twinline BSP male/female screw fittings incl. hose clamps | MT28600 |
| Black hose tape for fixing the Twinline to the blast hose (1 roll) | HOSETAPE-1 |
| Black hose tape for fixing the Twinline to the blast hose (3 rolls) | HOSETAPE-3 |
- Product number: 2151830
- Manufacturer: Elcometer
- Weight: 0.122 kg
- Length: 200 mm
- Width: 124 mm
- Height: 20 mm
Technical details
This version
| Manufacturer order number | HOSETAPE-1 |
| Part | Black hose tape for fixing the Twinline to the blast hose (1 roll) |
Elcometer – general
| Manufacturer order number | depends on version, see variant selection |
| Manufacturer | Elcometer Limited |
| Number of versions | 7 |
| Internal diameter | 6 mm (¼") |
| Outside diameter | 13 mm (½") |
| Construction | lining NR + SBR + EPDM rubber |
| Reinforcement | spiral polyester yarn |
| Working pressure | 20 bar (290 psi) |
| Burst pressure | 60 bar (870 psi) |
| Operating temperature | -35 °C to +80 °C |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Downloads
Register