Elcometer 138/2 Surface Contamination Kit
€624.75
Ready to ship in 2-5 days
Custom image 1
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- 100 pH test strips, 100 iron test strips, 40 chloride test strips
- 50 Elcometer 135C Bresle Test Patches
- 3 × 5 ml syringes, 3 needles, 30 ml plastic beaker
- Carry case, operating instructions
Elcometer 138/2 Surface Contamination Kit
Soluble salts under a coating lead to osmosis, blistering and corrosion. That is why the surface must be tested for salts before coating – to ISO 8502-6 (Bresle method) and ISO 8502-9 (conductivity measurement).
The Elcometer 138/2 tests for invisible contaminants: pH (acidic or alkaline), chloride ions, ferrous ions as an indicator of corrosion, and soluble salts. The test strips indicate the concentration in the sample solution; if the area and water volume are known, it can be expressed in ppm or µg/ml.
At a glance
- Four tests: pH, chloride, iron and salts
- Complete: test strips, Bresle patches and accessories in a case
- Standards: AS 3894.6-A, AS 3894.6-D, SSPC Guide 15
- Product number: 1040022
- Manufacturer: Elcometer
- Weight: 1 kg
Technical details
| Manufacturer order number | E138----2 |
| Measuring range | pH 0–14; iron 3, 10, 25, 50, 100, 250, 500 mg/l Fe²⁺; chloride 30–600 ppm Cl |
| Dimensions | 300 × 220 × 75 mm |
| Weight | 2.1 kg |
| Standards | AS 3894.6-A, AS 3894.6-D, SSPC Guide 15 |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Downloads
Register
