Elcometer 134A Chloride Ion Test Kit for Abrasives
€145.33
Ready to ship in 2-5 days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- 4 test kits, each with abrasive sample container, mixing container with pre-measured solution, titration tube, tube snapper and strap
- Operating instructions
Elcometer 134A Chloride Ion Test Kit for Abrasives
Chlorides and other soluble salts left on the surface before the first coat force the coating off through corrosion and blistering long before its service life is reached. The Elcometer 134 test kits let you check directly on site – no laboratory, pre-dosed reagents and results in ppm.
Chlorides from contaminated abrasive are deposited directly on the surface during blasting – especially when the media is recycled several times. The Elcometer 134A lets you test the abrasive in the field and prevent costly salt-related failures.
At a glance
- Preventive: test the abrasive before it contaminates the surface
- Fast: result in approx. 1.5 minutes
- Simple: pre-measured solution, titration tube
| Item type: | Test Kit |
|---|
- Product number: 1040091
- Manufacturer: Elcometer
- Weight: 0.344 kg
Technical details
| Manufacturer order number | E134----2 |
| Measuring range | 1–60 µg/cm² (1–60 ppm) |
| Resolution | 1 µg/cm² (1 ppm) |
| Sample time | approx. 1.5 min |
| Tests per kit | 4 |
| Storage | not exceeding 25 °C |
| Dimensions | 185 × 125 × 110 mm |
| Weight | 367 g |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Downloads
Register