Elcometer 107 Cross Hatch Cutter 6 × 2 mm, basic version
€300.52
Ready to ship in 1–3 working days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
- Handle with blade 6 × 2 mm
- Hex key
- Case
- Operating instructions with classification chart
Elcometer 107 Cross Hatch Cutter – fast, standard-compliant adhesion testing
With the Elcometer 107 you test the adhesion of a coating to the substrate in just a few minutes: cut the lattice, apply and remove the tape, compare the pattern with the classification chart. Its rugged design makes it suitable for thin, thick and hard coatings on all surfaces – on site and in the laboratory.
Your benefits
- Rugged: solid metal body, large non-slip handle
- Four cutting edges in one blade: rotate the blade instead of replacing it – longer service life
- Quick blade change: blade spacings of 1, 1.5, 2 and 3 mm for coating thicknesses up to 250 µm
- Standard-compliant: ISO 2409, ASTM D 3359-B and other standards
- Optional calibration certificate for the blade
Which blade do I need?
| Blade (teeth × spacing) | Coating thickness | Standard |
|---|---|---|
| 6 × 1 mm | 0–60 µm (ISO) or 0–50 µm (ASTM) | ISO 2409, ASTM D 3359 |
| 11 × 1 mm | 0–50 µm | ASTM D 3359 |
| 11 × 1.5 mm | approx. 0–90 µm | – |
| 6 × 2 mm | 61–120 µm (ISO) or 50–125 µm (ASTM) | ISO 2409, ASTM D 3359 |
| 6 × 3 mm | 121–250 µm | ISO 2409 |
Basic version or complete kit?
- Basic version: handle with blade, hex key, case, operating instructions with classification chart
- Complete kit: additionally magnifier (×8), brush and tape to ISO 2409 or ASTM D 3359 in a plastic carry case – everything for on-site testing
| Item type: | Gitterschnittgerät |
|---|
- Product number: 1028262
- Manufacturer: Elcometer
- Length: 270 mm
- Width: 210 mm
- Height: 60 mm
Technical details
This version
| Manufacturer order number | F10713222-4 |
| Version | Basic version |
| Blade | 6 × 2 mm, 4 cutting edges |
| Coating thickness | 61–120 µm (ISO) or 50–125 µm (ASTM) |
| Calibration certificate | no (available as option) |
Elcometer 107 – general
| Test method | Cross hatch test (adhesion) |
| Blade | 4-edge blade, quick to change |
| Blade spacings | 6 × 1 mm, 11 × 1 mm, 11 × 1.5 mm, 6 × 2 mm, 6 × 3 mm |
| Coating thickness | up to 250 µm (depending on blade) |
| Calibration certificate | optional (version “with calibration certificate”) |
| Standards | AS 3894.9, AS 1580.408.4, ASTM D 3359-B, BS 3900-E6, ECCA T6, EN 13523-6, ISO 2409, ISO 16276-2, JIS K 5600-5-6, NF T30-038 |
Further manufacturer information
Manufacturer: Elcometer Limited, Manchester (UK) – beschicht is an authorised Elcometer dealer.
Spare parts: Replacement blades (6 × 1, 11 × 1, 11 × 1.5, 6 × 2, 6 × 3 mm) and tape to ISO 2409 or ASTM D 3359 are available separately.
Downloads
Register