Stick and Go® 60 cm x 25 m
€145.42*
% €180.64* (19.5% saved)Ready for shipping in 1-3 days
Specifications
3 versions: 60 cm x 10 m, 60 cm x 25 m and 100 cm x 25 m.
Stick & Go® fast and effective protection of surfaces such as stainless steel table surfaces
The thickness of the film makes it resistant, tear-proof and highly abrasion-resistant. It is easy to unroll and has good adhesion. The film can be easily removed. It can be easily cut with the magnetic cutter or the electric scissors. It can be processed using a Colad film dispenser.
Features and benefits
- White colour for optimal reflective properties
- Chemical and solvent resistant
- Solid and durable
- Corrugated non-slip surface
- Easy to apply and cut
- Not antistatic.
Technical data
- Material: Polypropylene (PP)
- Melting point: 120°C
- Colour: white
- Width: 60 or 100 cm
- Length: 10 or 25 m
- Thickness: 220 microns
- Surface: Raw, for safe working, non-slip
- Processing temperature: between 15°C and 40°C
- Packaging: Each roll in a box
ATEX
Colad Stick & Go® is not conductive. To determine whether Stick & Go® is suitable for use in your ATEX work area, it is the user's responsibility to determine and assess the risks associated with the product in accordance with the ATEX User Directive 1999/92/EC.
Following the requirements of the EN 60079-32-1 standard, the user may determine that Stick & Go® for Explosion Groups IIA and IIB may be suitable for use on electrically conductive surfaces, such as stainless steel mixing tables in Zone 2, as the product is no thicker than 2mm. The risks and compliance must always be evaluated by the user and are always subject to the responsibility of the user in accordance with the ATEX User Directive 1999/92/EC.
#Although Stick & Go® is non-conductive, it cannot be applied on the floor of an ATEX area (zone 0-1-2/20-21-22).
## The user should always identify and assess whether the product Stick & Go® causes risks in their process. It is the user's responsibility to fulfil the requirements of the ATEX User Directive 1999/92/EC and to determine whether Stick & Go® can be used safely in their process.
### Only persons with sufficient knowledge of the ATEX User Directive 1999/92/EC may assess the risk in an ATEX area.
IF IN DOUBT, DO NOT USE THE PRODUCT AND CONSULT AN ATEX EXPERT!
- Product number: 1006310
- Manufacturer: Colad
- EAN: 8714247013496
- Weight: 2.72 kg
- Length: 620 mm
- Width: 160 mm
- Height: 160 mm
Register
