Airless gun filter for Wagner – 150 mesh, blue (FM2005)
€0.89
Ready to ship in 1–3 working days
Question about this product?
We are here for you. Mon-Fri, 9am - 4pm
Scope of delivery
Airless gun filter (insert filter) for Wagner
The gun filter sits in the handle of the airless spray gun and is the last filtration stage directly in front of the tip. It retains particles, skin and pigment lumps – for an even spray pattern and far fewer clogged tips.
- Fits airless guns with a long filter housing, e.g. Wagner, as well as Titan and Anest Iwata
- 7 mesh sizes from 30 to 300 mesh, colour-coded
- Scope of delivery: 1 filter
Versions, manufacturer numbers and replacements
| Mesh | Colour | Manufacturer no. | Replaces | Application |
|---|---|---|---|---|
| 30 mesh | green | FM2001 | Wagner 89323 | emulsions, fillers, putty, high-build coatings |
| 50 mesh | white | FM2002 | Wagner 34377 | emulsions, latex paints, corrosion protection |
| 75 mesh | black | FM2003 | – | primers, undercoats, wood preservatives |
| 100 mesh | yellow | FM2004 | Wagner 43235 | paints, glazes, primers |
| 150 mesh | blue | FM2005 | – | paints, clear coats, stains |
| 200 mesh | red | FM2006 | Wagner 34383 | low-viscosity paints, oils, release agents |
| 300 mesh | silver | FM2018 | – | very thin materials, fine finish |
Which mesh size?
The thinner the material and the finer the surface, the higher the mesh count. Rule of thumb: match tip and filter – a filter that is too fine clogs quickly with thick materials, one that is too coarse lets particles through to the tip.
Replacement and care
Rinse the filter with the appropriate cleaning agent after every job and replace it regularly – a clogged gun filter is the most common cause of an uneven spray pattern and pressure loss at the gun.
- Product number: 100034
- Manufacturer: beschicht
- Weight: 0.003 kg
Register