Manufacturer no.:
F510-20T
Elcometer 510 Model T Automatic Adhesion Tester; 20mm Kit
€3,781.23*
Ready for shipping in 1-3 days
Also interesting
Product information
The Elcometer 510 Adhesion Gauge accurately measures the adhesion force between coating and substrate.
Elcometer 510 Automatic Pull-Off Adhesion Gauge Features Explained:
 |  |  |
| Automatic adhesion tester with selectable pull rates for 10, 14.2, 20 and 50mm diameter punches. | Display of trend curves or live statistics next to the measured value. | Individual, user-definable tensile rate diagrams can be saved with each measured value. |
 |  |  |
| Stores individual readings and pull rate graphs in up to 2,500 alphanumeric batches, including date, time and break patterns. | Either pull to the maximum or to the preset limit value. Unique hold mechanisms allow you to set a time delay before depressurising to zero. | Store cohesion and adhesion fracture patterns along with your pull-off force data according to national and international standards. |
Accurate
- Fully adjustable pull rates from 0.1-1.4 MPa/s (14.5-203 psi)
- Accuracy ±1 % of full scale
- Can be used in accordance with national and international standards
- Switchable units: MPa, psi, Nmm² and N
High performance
- Consistent pressure build-up up to 100MPa (14400psi)/li>
- USB and Bluetooth® data output to iOS1 or Android™ devices
- Stores up to 60,000 readings in 2,500 batches
Efficient
- Ideal for use in the laboratory and on the construction site
- Reusable punches with 10, 14.2, 20 and 50mm (0.39, 0.56, 0.76 and 1.96") diameter
- Compatible with ElcoMaster® and ElcoMaster® Mobile App
- Measures on small, curved and flat surfaces
Executive Summary
More information
- Product number: 1028249
- Manufacturer: Elcometer Instruments GmbH
- Length: 540 mm
- Width: 430 mm
- Height: 150 mm
Technical details
| Model S | Model T | |
| Repeatable and reproducible measurements | ⬤ | ⬤ |
| User-friendly menu; multilingual | ⬤ | ⬤ |
| Robust; water, dust and impact resistant; complies with IP64 | ⬤ | ⬤ |
| Bright LCD colour screen; with ambient light sensor | ⬤ | ⬤ |
| Scratch-resistant and solvent-resistant colour display; 2.4" (6 cm) TFT | ⬤ | ⬤ |
| Calibration certificate | ⬤ | ⬤ |
| 2-year warranty on the measuringdevice1 | ⬤ | ⬤ |
| Automatically rotating display; 0°, 180° | ⬤ | ⬤ |
| Data output via USB (live measurements and batch) | ⬤ | ⬤ |
| Data output viaBluetooth® | ⬤ | |
| PC control; start and stop the test device with live measurement values from a PC (USB only) | ⬤ | |
| Selectable units (MPa, psi, N, Nmm-2) | ⬤ | ⬤ |
| Statistics display (η, x, σ, Hi, Lo, CV%, N>hilimit2) | ⬤ | ⬤ |
| Draw rate display | ⬤ | ⬤ |
| Trend curve | ⬤ | ⬤ |
| Train occupancy diagram (load over time) | ⬤ | |
| Interchangeable stamps; 10, 14.2, 20 and 50 mm | ⬤ | ⬤ |
| User-selectable pull rates; (Model S and Model T standard mode) | ||
| 10 mm: 1.00, 2.00, 3.00, 4.00, 5.00 MPa/s 125, 200, 400, 600, 725 psi/s | ⬤ | ⬤ |
| 14.2 mm: 0.4, 0.7, 1.4, 2.0, 2.5 MPa/s 60, 100, 200, 300, 360 psi/s | ⬤ | ⬤ |
| 20 mm: 0.2, 0.3, 0.7, 1.0, 1.2 MPa/s 30, 50, 100, 150, 180 psi/s | ⬤ | ⬤ |
| 50 mm: 0.04, 0.08, 0.12, 0.16, 0.20 MPa/s 5, 8, 16, 24, 30 psi/s | ⬤ | ⬤ |
| User-selectable pull rates; (Model T extended mode) | ||
| 10 mm: 0.40 - 5.60 MPa/s 58 - 812 psi/s in increments of 0.1 MPa / 1 psi | ⬤ | |
| 14.2 mm: 0.20 - 2.80 MPa/s 29 - 403 psi/s in increments of 0.1 MPa / 1 psi | ⬤ | |
| 20 mm: 0.10 - 1.40 MPa/s 15 - 203 psi/s in increments of 0.1 MPa / 1 psi | ⬤ | |
| 50 mm: 0.02 - 0.22 MPa/s 2 - 32 psi/s in increments of 0.01 MPa / 0.1 psi | ⬤ | |
| User-selectable limit value and limit value hold function | ⬤ | |
| Device memory; maximum number of measured values | 60 | 60 |
| Number of batches (alphanumeric - model T) | 1 | 2,500 |
| Attribute modes for compliance with national and international standards | ⬤ | |
| Display modes | ||
| Measured values, selected statistics and history diagram (last 20 measured values) | ⬤ | ⬤ |
| Access rate diagrams | ⬤ | |
| Batch display | ⬤ | |
| Power supply; battery (B), mains power (M) | B | B, M |
| USB cable andElcoMaster® CD | ⬤ | ⬤ |
| Power cable with international plug adapter (UK, EU, US, AUS) | ⬤ | |
| Plastic transport case | ⬤ | ⬤ |
| Date and time display | ⬤ | |
| Calibration test for use on site | ⬤ | ⬤ |
Reviews
Register
