Nozzle set SATAjet X 5500 RP PHASER 1.2 I
€337.51*
% €476.71* (29.2% saved)Express processing: Shipping within 24 hours
The nozzle system is simple and easy to understand: The two proven technologies - namely HVLP and RP - remain the same. There are "I" and "O" nozzle sets for each. With increasing nozzle size in the respective technology (HVLP/RP) and jet shape ("I" or "O"), the material ejection also increases constantly - this means that the respective jet height and width remain the same across the entire spectrum. The user therefore has a transparent and logical system that gives him clear and structured decision-making options.
The "I" nozzles have an elongated jet shape with a short run-off zone and a drier jet core, which is ideal for a lower application speed and offers maximum control during painting. The coating thickness per spray pass is slightly lower compared to an "O" nozzle with the same nozzle size.
- Stretched jet shape with little run-off zone
- Improved control during application
- Reduced layer application per spray pass compared to the previous or "O" nozzle
The "O" nozzles have an oval jet shape with a larger run-off zone and a wet jet core, which is suitable for higher application speeds, but offers slightly less control during painting. The coating thickness per spray pass is slightly higher with the same nozzle size compared to an "I" nozzle.
- Oval jet shape with larger run-off zone
- Wet jet core for a higher working speed
- Coating thickness per spray pass slightly higher than with the "I" nozzle
- Product number: 1010199
- Manufacturer: SATA
- EAN: 4027533248422
- Weight: 0.142 kg
- Length: 125 mm
- Width: 60 mm
- Height: 35 mm
Register
