82198 | SATA dry jet stand, without spray guns
€596.01*
% €803.25* (25.8% saved)Fast Shipping
SATA dry jet 2 spare parts
Select original spare parts for your SATA dry jet 2 now. With the SATA dry jet 2 blow-drying gun, you can significantly reduce the flash-off and thus the cabin occupancy times. It uses the so-called Venturi principle – a multiple of ambient air is sucked in with the compressed air supplied. The even, wide air stream generated in the injector zone of the wide-angle nozzle also helps to reduce flash-off times. As a result, the SATA dry jet 2 achieves approximately 15% higher drying performance compared to other commercially available models. Economical. Durable. Low maintenance.advantages
- Shorter drying times for water-based paint systems
- Low investment costs
- Practice-orientated product versions
- Integrated air regulation
- Disposable sieve from the RPS multi-purpose cup system
- Ergonomic handle
- Easy to use
- Durable and low maintenance
- Product number: 1010968
- Manufacturer: SATA
- EAN: 4027533821984
- Weight: 9.12 kg
- Length: 1100 mm
- Width: 600 mm
- Height: 300 mm
Further manufacturer information
SAL-Check: | www.sata.com/sal |
Garantieanmeldung: | www.sata.com/garantieanmeldung |
Lackdatenblätter: | www.sata.com/lackdaten |
Weitere SATA Produkte:hier
Mehr Informationen
- Artikelnummer: 82198
- Produktvorteile: Kürzere Trocknungszeiten bei wasserbasierten Lacksystemen
- Artikelname: SATA dry jet Stativ, ohne Pistolen
Downloads
Register