Standard PrecisionSwirl circular metering device, 0.012 inch (0.3 mm) coupling offset for smaller bead widths Typical for bead seam and after bead seam
€19,032.38*
% €22,391.04* (15% saved)Ready for shipping in 5-8 Werktage
PrecisionSwirl has adjustable speeds, base distances and flow rates for greater control and better penetration on irregularly shaped parts. The system is compatible with most sealants, including expandable sealants, thermosetting epoxy and PVC plastisol.
PrecisionSwirl creates no air swirls, so the bead profile is uniform over the bead length, reducing squeeze-out, repair and scrap. The applicator produces a variety of pattern widths, material thicknesses and spray patterns.
Applies a uniform swirl pattern in robotic applications
- Delivers open bead or closed continuous bead patterns
- Creates a circular swirl bead pattern
- The swirl pattern has a uniform bead profile and even edges
Greater distance between nozzle and workpiece facilitates robot programming
The swirl pattern can be changed across the bead path
Swirl applicator without dynamic seals
| Connection type: | With thread |
|---|---|
| Coupler offset (inch): | 12 |
| Coupler offset (mm): | 3,048 |
| Flow control type: | Determination, taxes |
| Maximum operating pressure (MPa): | 24.1 |
| Maximum operating pressure (kPa): | 24100 |
| Maximum operating pressure (kg/cm²): | 246 |
| Maximum operating pressure (psi): | 3500 |
| Model: | PrecisionSwirl |
| Mounting position: | For tool assembly |
| Permissible operating pressure (bar): | 241 |
| Type: | Circular dosing device |
- Product number: 1036549
- Manufacturer: Graco
- EAN: 00633955923508
- Weight: 1.434 kg
- Length: 290 mm
- Width: 210 mm
- Height: 90 mm
Register
