Manufacturer no.:
GCP3R1
Probler P2 Elite gun assembly with 01 mixing chamber set
€3,827.04*
Ready for shipping in 5-8 days
Also interesting
Product information
The Probler P2 gun is lightweight and easy to handle - even in difficult spraying positions. The twin-piston design provides a trigger force of more than 136 kg (300 pounds) - far more than a smaller piston diameter. The Probler P2 reduces maintenance, increases spraying uptime and is easy to operate.
For high flow rates when spraying polyurethane foam and polyurea applications.
- Easy daily maintenance
- Quick response trigger
- Quick to replace chamber insert
- The design, which prevents cross-contamination, practically prevents material from entering the air piston
- Ergonomic handle and balanced design
- Enables the use of additional accessories
- Alternating hose routing on the side box
- Enables easy removal of the filter
| Actuation lock: | Lock |
|---|---|
| Air inlet size (inches): | 1/4 |
| Air inlet thread type: | NPT |
| Applicator type: | Hand- |
| Compatible material: | Adhesives, polyurethane, roof coating, polyurea, polyurethane coating |
| Component A, inlet size (cm): | 1.27 |
| Component A, inlet size (inch): | 1/2-20 |
| Component A, inlet size (mm): | 12.7 |
| Component A, inlet thread type: | UNF |
| Component B, inlet size (cm): | 111,125 |
| Component B, inlet size (inch): | 7/16-18 |
| Component B, inlet size (mm): | 11.1125 |
| Component B, inlet thread type: | UNF |
| Component type: | multi-component |
| For use with: | Reactor multi-component dispensers, Reactor spray foam and coating devices |
| Gender of the air inlet thread: | External thread |
| Gun activation: | Hand- |
| Gun included: | 1 |
| Gun type: | Air Purge |
| Gun weight (g): | 1770 |
| Gun weight (kg): | 1.77 |
| Gun weight (oz): | 32.4 |
| Maximum air inlet pressure (MPa): | 0.76 |
| Maximum air pressure (MPa): | 0.76 |
| Maximum air pressure (bar): | 7.6 |
| Maximum air pressure (kPa): | 760 |
| Maximum air pressure (psi): | 110 |
| Maximum air supply pressure (bar): | 7.6 |
| Maximum air supply pressure (kPa): | 760 |
| Maximum conveying capacity (kg/min): | 18 |
| Maximum inlet air pressure (psi): | 110 |
| Maximum material operating pressure (MPa): | 22 |
| Maximum material operating pressure (bar): | 220 |
| Maximum material pressure (MPa): | 22 |
| Maximum material pressure (bar): | 220 |
| Maximum material pressure (kPa): | 22000 |
| Maximum material pressure (psi): | 3200 |
| Maximum material temperature (°C): | 93 |
| Minimum air supply pressure (MPa): | 0.62 |
| Minimum air supply pressure (bar): | 6.2 |
| Minimum air supply pressure (kPa): | 620 |
| Minimum air supply pressure (psi): | 90 |
| Minimum delivery rate (kg/min): | 1.4 |
| Mixing chamber: | 01 (0.042) |
| Model: | P2 |
| Nozzle opening size (inches): | 42 |
| Permissible operating overpressure (psi): | 3200 |
| Pistol series: | elite |
| Product type: | spray gun |
| Rinsing method: | Air |
| Series: | elite |
| Size of the air inlet (cm): | 635 |
| Size of the air inlet (mm): | 6.35 |
| Size of the material opening (cm): | 107 |
| Size of the material opening (mm): | 01.07 |
| Spray gun mixing type: | impact |
| Spray pattern: | Flat nozzle |
| Spray pattern size (mm): | 254 |
| Total height (cm): | 12.1 |
| Total height (mm): | 121 |
| Total length (cm): | 7.9 |
| Total length (mm): | 79 |
| Total width (cm): | 17.4 |
| Total width (mm): | 174 |
| Type: | spray gun |
| Wetted parts: | Stainless steel, mild steel, chemical-resistant O-rings, PTFE |
More information
- Product number: 1031093
- Manufacturer: Graco
- EAN: 00633955449534
- Weight: 4.145 kg
- Length: 300 mm
- Width: 310 mm
- Height: 170 mm
Technical details
Operating specifications
| UPC product | 633955449534 |
|---|---|
| Division | CED |
| Price Block | 026 |
| Country of Origin | US |
| Unit | EA |
| Height | 17 CM |
| Length | 30 cm |
| Width | 31 cm |
| Volume | . 016 m³ |
| Shipping weight | 4 .15 KG |
Technical
| Air inlet size (cm) | 0. 635 |
|---|---|
| Air inlet size (in) | 1/4 |
| Air inlet size (mm) | 6. 35 |
| Air inlet thread gender | Male |
| Component A inlet size (cm) | 1. 27 |
| Component A inlet size (in) | 1 /2-20 |
| Component A inlet size (mm) | 12. 7 |
| Component A inlet thread type | UNF |
| Component B inlet size (cm) | 1. 11125 |
| Component B inlet size (in) | 7/16-18 |
| Component B inlet size (mm) | 11. 1125 |
| Component B inlet thread type | UNF |
| Component Type | Plural- Component |
| Fluid Orifice Size (cm) | 0. 107 |
| Fluid Orifice Size (mm) | 1. 07 |
| For use with | Reactor Plural Component Proportioner, Reactor Spray Foam and Coatings Equipment |
| Gun Weight (g) | 1770 |
| Gun Weight (kg) | 1. 77 |
| Gun weight (lb) | 3. 9 |
| Gun weight (oz) | 32. 4 |
| Maximum air pressure (bar) | 7. 6 |
| Maximum air pressure (kPa) | 760 |
| Maximum air pressure (psi) | 110 |
| Maximum fluid pressure (bar) | 220 |
| Maximum fluid pressure (kPa) | 2 2 000 |
| Maximum fluid pressure (psi) | 3 200 |
| Maximum fluid temperature (°C) | 93 |
| Maximum fluid temperature (°F) | 2 00 |
| Minimum air inlet pressure (bar) | 6. 2 |
| Minimum air inlet pressure (kPa) | 620 |
| Minimum air inlet pressure (psi) | 90 |
| Model | P2 |
| Overall Height (cm) | 12. 1 |
| Overall height (in) | 4. 75 |
| Overall height (mm) | 121 |
| Overall Length (cm) | 7. 9 |
| Overall length (in) | 3. 125 |
| Overall Length (mm) | 79 |
| Overall width (cm) | 17. 4 |
| Overall width (in) | 6. 875 |
| Overall width (mm) | 1 74 |
| Pattern Size (in) | 10 in @ 24 in from target |
| Pattern size (mm) | 2 54 |
| Purge Method | Air |
| Series | Elite |
| Spray Gun Mix Type | Imp ing ement |
| Trigger lock | L ocking |
| Product Type | Spray Gun |
| Minimum flow rate (kg/min) | 1. 4 |
| Minimum flow rate (lb/min) | 3 |
| Maximum fluid working pressure (MPa) | 2 2 |
| Maximum fluid working pressure (bar) | 220 |
| Maximum fluid pressure (MPa) | 2 2 |
| Maximum flow rate (kg/min) | 18 |
| Maximum flow rate (lb/min) | 40 |
| Maximum air pressure (MPa) | 0. 76 |
| Maximum air inlet pressure (bar) | 7. 6 |
| Maximum air inlet pressure (kPa) | 760 |
| Maximum air inlet pressure (psi) | 110 |
| Minimum air inlet pressure (MPa) | 0. 62 |
| Maximum air inlet pressure (MPa) | 0. 76 |
| gun_series | Elite |
Reviews
Register
