Manufacturer no.:
233055
Husky 716 208 litre (55 gal) complete AL feed pump unit with AC seats, Buna balls, Buna diaphragms and AL pipe
€1,182.03*
% €1,688.61* (30% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
The Husky 716 air-operated diaphragm pump has an external control for remote operation.
- Centre housing and end opening
- No mechanical seals to cause material leakage or failure
- Quiet running at less than 85 dB(A) with user-friendly remote silencer for even lower noise levels
- Easy to maintain air and ball check valves
- 19.05 mm (3/4'') centre and end opening
- No seals that can cause leaks or fail
- Quiet operation; less than 85 dB(A) with user-friendly remote silencer for even lower noise levels
- Easy to maintain air and ball check valves
| Application: | industry |
|---|---|
| Ball material: | Buna |
| Compatible material: | Antifreeze, Cleaning Agents, Motor Oil, Grease & Oil, Cutting Oil, Water - Wastewater Treatment, Water, Ink |
| Distributor configuration: | Shared connection |
| Gender of the inlet thread: | Internal thread |
| Gender of the material inlet thread: | Internal thread |
| Gender of the material outlet thread: | Internal thread |
| Includes: | Sheet pile, aluminum pipe |
| Inlet size (cm): | 635 |
| Inlet size (inch): | 1/4 |
| Inlet size (mm): | 6.35 |
| Inlet thread type: | NPT |
| Material: | aluminum |
| Material inlet thread type: | NPT |
| Material outlet size (cm): | 1,905 |
| Material outlet size (mm): | 19.05 |
| Material outlet thread type: | NPT |
| Maximum air pressure (bar): | 7 |
| Maximum air pressure (kPa): | 70 |
| Maximum air pressure (psi): | 100 |
| Maximum material pressure (MPa): | 0.7 |
| Maximum material pressure (bar): | 7 |
| Maximum material pressure (kPa): | 70 |
| Maximum material pressure (psi): | 100 |
| Maximum number of cycles (DH/min): | 400 |
| Maximum solids size (cm): | 2,388 |
| Maximum solids size (mm): | 2.3876 |
| Membrane material: | Buna |
| Model: | Husky |
| Motor type: | Pneumatic |
| Number of pieces: | 2 |
| Series: | 716 |
| Size of the material inlet opening (cm): | 1.9050 |
| Size of the material inlet opening (inches): | 3/4 |
| Size of the material inlet opening (mm): | 19.05 |
| Size of the material outlet opening (inches): | 3/4 |
| Type: | Pneumatic diaphragm pump system |
More information
- Product number: 1036129
- Manufacturer: Graco
- EAN: 00633955933545
- Weight: 6.93 kg
Reviews
Register
