Manufacturer no.:
233051
Husky 515 208 litre (55 gal.) complete PP feed pump unit with PP seats, PTFE balls, PTFE diaphragms and PP pipe
€1,340.30*
% €1,914.71* (30% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
The Husky 515 air-operated double diaphragm pump is equipped with a non-blocking and low-pulsation air valve that enables a smooth and fast stroke change.
The material cover (screw-through design) prevents material leakage and makes the Husky pump safer and more reliable.
- Centre and end opening optionally available.
- No mechanical seals to cause material leakage or failure
- Quiet running at less than 85 dB(A) with user-friendly remote silencer for even lower noise levels
- Easy to maintain air and ball check valves
- Requires only 0.14 MPa (1.4 bar, 20 psi)
- Split manifold option to allow multiple materials to be pumped without mixing
- Delivery rate up to 56.7 l/min
- Easy to maintain air and ball check valves
- Reliable air valves for years of continuous operation
| Application: | industry |
|---|---|
| Ball material: | PTFE |
| Compatible material: | Antifreeze, Detergents, Resin, Polymers, Motor Oil, Grease & Oil, Hydraulic Fluid, Gear Oil, Cutting Oil, Water - Wastewater Treatment, Ink |
| Distributor configuration: | Shared connection |
| Gender of the inlet thread: | Internal thread |
| Gender of the material inlet thread: | Internal thread |
| Includes: | Bunghole base, polypropylene pipe |
| Inlet size (cm): | 635 |
| Inlet size (inch): | 1/4 |
| Inlet size (mm): | 6.35 |
| Inlet thread type: | NPT |
| Material: | Polypropylene |
| Material inlet thread type: | NPT |
| Maximum air pressure (bar): | 7 |
| Maximum air pressure (kPa): | 70 |
| Maximum air pressure (psi): | 100 |
| Maximum material pressure (MPa): | 0.7 |
| Maximum material pressure (bar): | 7 |
| Maximum material pressure (kPa): | 70 |
| Maximum material pressure (psi): | 100 |
| Maximum number of cycles (DH/min): | 400 |
| Maximum solids size (cm): | 2,388 |
| Maximum solids size (mm): | 2.3876 |
| Membrane material: | PTFE |
| Model: | Husky |
| Motor type: | Pneumatic |
| Number of pieces: | 2 |
| Series: | 515 |
| Size of the material inlet opening (cm): | 1.9050 |
| Size of the material inlet opening (inches): | 3/4 |
| Size of the material inlet opening (mm): | 19.05 |
| Type: | Pneumatic diaphragm pump system |
More information
- Product number: 1032316
- Manufacturer: Graco
- EAN: 00633955933507
- Weight: 5.44 kg
Reviews
Register
