Husky 1050HP SS metal air operated double diaphragm pump with SS seat, SS ball, 2 pcs PTFE/SP fluid diaphragm & BSPT connection
€8,591.68*
% €10,107.86* (15% saved)Ready for shipping in 5-8 Werktage
The Husky 1050HP air-operated diaphragm pump is the first commercially available pump that allows the user to choose between high-pressure and low-pressure operation with Graco's pressure switch valve. High pressure operation is not always necessary. Low pressure operation reduces air consumption by up to 50 %. These features, combined with the quality and reliability of Husky's standard diaphragm pump, make this high-pressure diaphragm pump one of the most unique products on the market.
Advantages of the Husky 1050HP double diaphragm pump
- Increased fluid pressure without compromising flow
- With the low-high pressure mode valve, you can operate the pump as a standard air-operated double diaphragm pump or as a high-pressure air-operated double diaphragm pump
- Reduce air consumption by up to 50 % with the low-pressure mode
- Same repair parts as the Husky 1050 diaphragm pump
External control valves
- Easy maintenance
- Reduced downtime (quick changeover time)
- Spring-loaded for faster changeover
Modular air valve
- Easy maintenance
- Standstill-free and lubrication-free
Material distributor
- Stainless steel or aluminium
Additional diaphragm
- For high pressure operation
Low/high pressure service valve
- Selectable operating setting
- Reduces air consumption
- High pressure is only used when required
Wetted components
- Requires the same parts as the Husky 1050, reducing inventory
| Air inlet size (inches): | 3/4 |
|---|---|
| Air inlet thread type: | NPT |
| Application: | industry |
| Ball material: | 316 stainless steel |
| Connection type: | With thread |
| Distributor O-ring material: | PTFE |
| Distributor configuration: | End opening |
| Gender of the air inlet thread: | Internal thread |
| Material: | stainless steel |
| Material inlet thread type: | NPT |
| Material in the liquid housing: | stainless steel |
| Material of the centre housing: | aluminum |
| Material outlet size (cm): | 2.54 |
| Material outlet size (mm): | 25.4 |
| Material outlet thread type: | NPT |
| Maximum air pressure (MPa): | 862 |
| Maximum air pressure (bar): | 8.62 |
| Maximum air pressure (kPa): | 862 |
| Maximum air pressure (psi): | 125 |
| Maximum delivery rate (L/min): | 189 |
| Maximum material pressure (MPa): | 1.72 |
| Maximum material pressure (bar): | 17.2 |
| Maximum material pressure (kPa): | 1720 |
| Maximum material pressure (psi): | 250 |
| Maximum number of cycles (DH/min): | 140 |
| Maximum operating temperature (°C): | 82 |
| Maximum solids size (cm): | 3,175 |
| Maximum solids size (mm): | 3,175 |
| Membrane, compatible material: | PTFE |
| Membrane material: | PTFE/EPDM 2-part |
| Model: | Husky |
| Seat material: | stainless steel |
| Series: | 1050HP |
| Size of the exhaust air opening (inches): | 3/4 |
| Size of the material inlet opening (cm): | 2.54 |
| Size of the material inlet opening (inches): | 1 |
| Size of the material inlet opening (mm): | 25.4 |
| Size of the material outlet opening (inches): | 1 |
| Standards met:: | ATEX, CE |
| Supply voltage: | Air |
| Thread of the exhaust air opening (inside/outside): | Internal thread |
| Thread of the exhaust air opening (type): | NPT |
| Transmission ratio of the pump: | 2:1 |
| Type: | Pneumatic diaphragm pump |
| Wetted material: | Stainless steel, aluminum, PTFE / EPDM |
- Product number: 1033161
- Manufacturer: Graco
- EAN: 00755652063193
- Weight: 31.71 kg
- Length: 570 mm
- Width: 470 mm
- Height: 430 mm
Register
