Seam sealing tape 12 mm

Specifications

A time-saving method for applying seam sealant to paint projects on car, lorry, camper doors and edges.

The seam sealing tape is a reinforced acrylic tape with acrylic adhesive with high adhesion and shear strength. Excellent resistance to solvents, chemicals, UV radiation and heat, allowing the tape to adhere securely to a wide variety of substrates. Two variants of 9 mm and 12 mm for perfect sealing. Ideal for refreshing older seals and/or paint preparation on vehicle doors and edges.

Replace old seams with new ones. Simply apply the new seam in place, paint the object, dry the paint and you're done; time saving!

Features and benefits:

• Ideal for renewing weld seams on doors and edges for the automotive industry
• Easy to use and apply.
• Can be painted immediately, no adhesion promoter required
• Time saving compared to liquid sealants
• Excellent resistance to solvents, chemicals, UV radiation and heat
• Flat profile, it adheres very well to all smooth surfaces and is easy to mould to the object
• Can be used flexibly on doors and edges
• Easy to remove without leaving any residue

Application:

The product can be applied between two seams, creating a permanent seal. Application on a pre-treated and degreased surface. Remove the liner after application so that you can start painting immediately. The surface of the tape does not need to be pre-treated for priming.

Technical data:

• Colour: White
• Roll length: 9 m
• Roll diameter (Ø): 14 cm
• Roll width:
  906709 - 9 mm
  906712 - 12 mm
• Roll weight:
  906709 - 100 g
  906712 - 131 g
• Packaging unit:
  906709: Per 1 roll / 140 rolls in 1 box
  906712: Per 1 roll / 100 rolls in 1 box
• Storage: Preferred temperature between 20 and 25 degrees
• Shelf life: 1 year from receipt by the customer when stored at 22°C (72°F) and 50% relative humidity.

Physical properties:

• Liner: Acrylic foam base in transparent carrier
• Liner: Kraft paper
• Adhesive: High adhesion acrylic (solvent based)
• Thickness: 1 mm
• Width: 9 mm and 12 mm (+/- 1 mm)
• Length: 9 m (+/- 0.1 m)

Performance characteristics:

• Pull-off behaviour: PSTC-3 2.8 kg/25 mm
• Shear adhesion: PSTC-7 over 72 hours with 2 kg on 25 mm x 25 mm at 25°C
• Tensile strength: Over 50 kg/25 mm x 25 mm
• Heat resistance: PSTC-9 over 24 hours with 1 kg on 25 mm x 25 mm at 80°C
• Service temperature: -40°C to 170°C
• Application temperature: -10°C to 150°C