Sundström SR 500/SR 570 Ready Pack: Powered Respiratory Protection for Clean, Long Workdays
Anyone who wants to stay focused during sanding, coating, or dust-intensive work needs respiratory protection that doesn't just protect, but stays comfortable. The Sundström SR 500/SR 570 set combines a fan unit with face protection, a TAC visor, and practical accessories.
Product Overview: What's in the SR 500/SR 570 Set?
The Ready Pack consists of the SR 500 fan unit, the SR 570 face shield with a triacetate visor, standard battery, charger, PVC belt, particle filters, pre-filters, holders, flow meter, cleaning cloth, and instructions. This makes the set ready for immediate, repeatable protection applications.
| Component | Practical Benefit |
|---|---|
| SR 500 Fan Unit | Supports air supply and reduces breathing resistance during longer shifts. |
| SR 570 Face Shield | Protects face and eye area; TAC visor for robust visibility in daily work. |
| PVC Belt | Easy to clean and practical for workshop, painting, and coating environments. |
| Filter and Pre-filter Pack | Suitable for particle-heavy work environments; always check filter selection against specific hazards. |
Guide value according to product data: assigned protection factor 200, nominal protection factor 500.
Specified operating range; observe relative humidity below 90%.
Fan, face shield, battery, charger, filters, pre-filters, and accessories in one set.
SR 500/SR 570 Ready Pack directly at Beschicht.com
For workshops, painting environments, and dust-intensive applications: a modular powered respiratory protection system with comfortable air supply and face protection.
To ProductRecommended Basic Settings and Guidelines
The following values are guidelines derived from available product data. Depending on the work material, filter combination, and operational risk assessment, additional requirements may apply.
| Parameter | Guideline / Note |
|---|---|
| Operating Temperature | -10 to +55 °C, below 90% relative humidity. |
| Storage | -20 to +40 °C, store in a dry and clean place. |
| Protection Factor | Assigned Protection Factor 200, Nominal Protection Factor 500, both TH3. |
| Battery | Li-Ion 14.4 V / 2.25 Ah according to product page. |
Pro Workflow: Ready for Use in 6 Steps
- Assess Hazard: Evaluate particles, vapors, and work environment; select appropriate filter combination.
- Charge Battery: Check charge status before shift starts and plan for a spare battery.
- Mount Filters: Correctlly insert particle filters, pre-filters, and holders.
- Test Flow: Check with the flow meter before putting it on.
- Check Fit: Adjust face shield, headband, and hose so nothing pulls or leaks.
- Clean After Use: Keep visor, belt, hose, and housing clean; replace damaged parts.
Daily Troubleshooting
1. Airflow seems too weak
Check pre-filters and particle filters, charge battery, and repeat the airflow test. If behavior remains abnormal, do not use the device.
2. Visor fogs up or visibility deteriorates
Check air supply, fit of the face shield, and visor contamination. Replace protective film or visor if scratched or heavily soiled.
3. Device sits uncomfortably
Readjust headband, belt position, and hose routing. The hose should not kink, pull, or get caught during work.
4. Filters clog quickly
Change pre-filters more frequently, reduce dust exposure, and improve extraction at the workplace. Do not delay filter replacement.
Maintenance and Care
- Regularly check visor and protective film for scratches, cracks, and dirt.
- Clean PVC belt, hose, and housing after dusty work.
- Change pre-filters in good time so that main filters operate stably for longer.
- Store battery in a dry place and charge fully before long shifts.
- Check seals, hose connections, and filter adapters for secure fit.
FAQ: Frequently Asked Questions about the SR 500/SR 570 Ready Pack
What kind of work is the set suitable for?
For dust-intensive tasks, sanding work, coating environments, and workplaces where fan-assisted respiratory protection with face shielding is advisable.
What does TH3 mean?
TH3 is a high protection class within powered respiratory protection systems. Specific suitability must always match the risk assessment and filter selection.
Is the TAC visor suitable for rough workshop conditions?
The set is supplied with a triacetate visor. In practice, you should use additional protective films and check the visor regularly for scratches.
Do I have to do a flow check before every use?
Yes, the flow check is a simple safety routine to check filter condition, battery, and air supply before starting work.
How do I store the system correctly?
Store in a clean, dry, and protected place. The specified storage range is -20 to +40 °C and below 90% relative humidity.
Conclusion
The Sundström SR 500/SR 570 Ready Pack is a powerful solution for users who want to combine respiratory protection, face protection, and working comfort in a modular system. Especially during longer, dusty, or intensive operations, the fan-assisted air supply pays off—provided that filter selection, flow testing, and maintenance are consistently implemented.
Ready for Clean Respiratory Protection in Daily Work?
View the SR 500/SR 570 set with PVC belt and TAC visor now at Beschicht.com.
View Product