Colad Optimus: The Smart Step for Perfect High-Gloss Surfaces
Whether for spot repair, full paint jobs, or finishing, the Colad Optimus provides maximum control during the polishing process. Thanks to its flexible foam structure and durable silicone carbide abrasive, it delivers a uniform sanding pattern with minimal pressure—ideal for quickly correcting small paint imperfections and reducing polishing time significantly.
Product Overview
| Variant | Foam Color / Hardness | Application |
|---|---|---|
| Grit 1000 | White – rigid foam | Heavy pre-sanding of dust inclusions |
| Grit 2000 | White – medium-hard | Correction of minor paint defects before polishing |
| Grit 3000 | Grey – soft foam | Fine sanding before high-gloss finish |
| Grit 4000 | Grey – extra soft | Final step before polishing |
Reduces polishing effort and saves up to 30% time.
Flexible foam prevents pressure marks and ensures consistent results.
Suitable for hand or machine use – wet or dry.
Recommended Base Settings (Reference Values)
- Machine speed: 3000–5000 RPM
- Moderate pressure with smooth motion
- Keep surface clean during sanding
- For wet sanding: use clean water only
- Ambient temperature: 15–25 °C
Professional Workflow (5 Steps)
- Clean the surface thoroughly from dust and grease.
- Select the right grit sequence (e.g. 2000 → 4000 for smooth transitions).
- Sand evenly with light pressure over the affected area.
- Rinse or wipe to remove residue.
- Polish afterwards using Colad OneStepReady Advanced Cut.
Troubleshooting
- Uneven sanding pattern: Check RPM and applied pressure.
- Pressure marks: Switch to softer foam (3000 / 4000).
- Too much material removal: Avoid Grit 1000 – too aggressive for finishing.
- Residue sticking to pad: Clean the surface between passes.
Maintenance & Care
- Clean and dry after each use.
- Store away from direct sunlight.
- Do not use on hot surfaces.
- Inspect Velcro backing regularly for residue.
- Replace pads after approx. 20 uses.
FAQ
- Can I use Colad Optimus by hand?
Yes – perfect for small or hard-to-reach areas. - Is it resistant to chemicals?
Yes, it resists most standard degreasers. - Can I switch between grits?
Yes, use progressive grits (1000 → 4000) for best gloss build-up. - How do I recognize worn pads?
Replace once the sanding surface becomes dull or uneven. - Which polish matches best?
Recommended: Colad OneStepReady Advanced Cut (Art. 8700).
Conclusion
With Colad Optimus, workshops gain a well-engineered sanding concept that combines efficiency and quality. Whether for wet or dry sanding, its durable silicone carbide grain and smart foam design make it the perfect choice for every polishing stage.
