Manufacturer no.:
APY165
Reactor A-XP1 complete dosing unit, Fusion AP gun, wheels, DataTrak, 230/400 V
€27,537.79*
Ready for shipping in 5-8 days
Also interesting
Product information
The Reactor A-XP1 is a coating dispenser designed by Graco to provide the reliability required on the job site. It has constant temperature control, even when spraying at maximum flow rates - resulting in better quality foam.
For polyurea coatings - applies up to 5.7 litres (1.5 gal.) per minute.
- Maintains temperature settings for better yields
- Ensures consistent output pressure for a uniform spray pattern
- Hassle-free operation and maintenance
- Best choice for affordability and durability
Three heating zones
- Three independent heat zones - ISO, resin and hose heater
- Precise heat control for reliable spraying to handle different chemical viscosities
- Digital temperature controller
Three heating zones
- Three independent heating zones - ISO, resin and hose heater
- Precise heat regulation for reliable spraying for handling different chemical viscosities
- Digital temperature controllers
Circuit manifold
- The quick and easy way to equalise pressure fluctuations in the system.
NXT air motor
- Higher efficiency due to low air consumption
- Low operating noise level due to silencer
- The air valve ensures a smooth and fast changeover
ISO pump lubrication system
- Prevents isocyanate crystallisation on the pump seal and pump shaft
Hybrid heater
- With better temperature control
| Air inlet size (inches): | 1/2 |
|---|---|
| Air inlet thread type: | NPT |
| Application: | Protective coatings |
| Applicator type: | Hand- |
| Compatible material: | Multicomponent materials |
| Component A, inlet size (inch): | 3/4 |
| Component A, inlet size (mm): | 19.05 |
| Component A, thread gender: | Internal thread |
| Component A, thread type: | NPT |
| Component B, inlet size (inch): | 3/4 |
| Component B, inlet size (mm): | 19.05 |
| Component B, thread gender: | Internal thread |
| Component B, thread type: | NPT |
| Component type: | Two-component |
| Frequency (Hz): | 50/60 |
| Gender of the air inlet thread: | Internal thread |
| Gun type: | Fusion AP |
| Hose length (m): | 15, 3 |
| Includes: | Dispenser, Fusion AP Gun, Heated Hose, Wheels, DataTrak |
| Material application.: | Polyurea |
| Maximum air supply pressure (bar): | 8.62 |
| Maximum air supply pressure (kPa): | 862 |
| Maximum conveying capacity (kg/min): | 11.4 |
| Maximum delivery rate (L/min): | 5.68 |
| Maximum flow rate (cm³/min): | 5680 |
| Maximum inlet air pressure (psi): | 125 |
| Maximum material temperature (°C): | 88 |
| Maximum material viscosity (cP): | 1500 |
| Maximum mixing ratio: | 1:1 |
| Minimum material viscosity (cP): | 250 |
| Model: | reactor |
| Noise pressure level, (dB(A)): | 70.2 |
| Phases: | 1, 3 |
| Print type: | High pressure |
| Product type: | multi-component |
| Rated power (W): | 13000 |
| Rated power (kW): | 13 |
| Series: | A-XP1 |
| Sink type: | solvent |
| Size of the air inlet (cm): | 1.27 |
| Size of the air inlet (mm): | 12.7 |
| Sound level, (dB(A)): | 80.1 |
| Supply voltage: | Air |
| System includes: | DataTrak and wheels |
| Total depth (cm): | 76.2 |
| Total depth (mm): | 762 |
| Total height (cm): | 110.5 |
| Total height (mm): | 1105 |
| Total width (cm): | 73.7 |
| Total width (mm): | 737 |
| Type: | Complete dosing device |
| Voltage (V): | 230, 400 |
| Weight (kg): | 140.6 |
| Wetted material: | Mild steel, stainless steel, chrome, aluminum, fluoroelastomer, PTFE, nylon |
More information
- Product number: 1037339
- Manufacturer: Graco
- EAN: 00755652318422
- Weight: 195.526 kg
Technical details
Operating specifications
| UPC product | 755652318422 |
|---|---|
| Division | CED |
| Price Block | 026 |
| Country of origin | CN |
| Unit | EA |
Technical
| Air inlet size (cm) | 1. 27 |
|---|---|
| Air inlet size (in) | 1/2 |
| Air inlet size (mm) | 12. 7 |
| Air inlet thread gender | Female |
| Amperage (A) | 26 @ 380 V ac (3-phase WYE), 45 @ 230 V ac (3-phase Delta), 56 @ 230 V ac (1-phase ) |
| Component A inlet size (in) | 3/4 |
| Component A inlet size (mm) | 19. 05 |
| Component A Thread Gender | Female |
| Component A Thread Type | NPT |
| Component B inlet size (in) | 3/4 |
| Component B inlet size (mm) | 19. 05 |
| Component B Thread Gender | Female |
| Component Type | Two Component |
| Frequency (Hz) | 50/60 |
| Includes | Proportioner, Fusion AP Gun, Heated Hose, Wheels, DataTrak |
| Material application | Polyurea |
| Maximum air consumption (SCFM) | 32 scfm at 2000 psi |
| Maximum air inlet pressure (bar) | 8. 62 |
| Maximum air inlet pressure (kPa) | 862 |
| Maximum air inlet pressure (psi) | 125 |
| Maximum flow rate (cc/min) | 5680 |
| Maximum flow rate (kg/min) | 11. 4 |
| Maximum flow rate (L/min) | 5. 68 |
| Maximum flow rate (lb/min) | 25 |
| Maximum fluid temperature (°C) | 88 |
| Maximum fluid temperature (°F) | 1 90 |
| Maximum fluid viscosity (cP) | 1 5 00 |
| Maximum Mix Ratio | 1: 1 |
| Minimum fluid viscosity (cP) | 2 50 |
| Overall depth (cm) | 76. 2 |
| Overall depth (in) | 30 |
| Overall depth (mm) | 762 |
| Overall height (cm) | 110. 5 |
| Overall height (in) | 43. 5 |
| Overall height (mm) | 1105 |
| Overall width (cm) | 73. 7 |
| Overall width (in) | 29 |
| Overall width (mm) | 737 |
| Power Rating (HP) | 17. 43 |
| Power Rating (kW) | 13 |
| Power rating (W) | 1 3 000 |
| Product Type | Plural Component |
| Sound pressure level (dB(A)) | 70. 2 |
| Weight (kg) | 140. 6 |
| Model | Reactor |
| Series | A-XP1 |
| system_includes | DataTrak and Wheels |
Reviews
Register
