Elcometer E130-SP Salt Contamination Meter with Certificate

With the new Elcometer 130 Soluble Salt Profiler you can perform a Bresle equivalent test in just over two minutes.

The multi-point conductivity sensors allow the Elcometer 130 SSP to accurately display salt concentration, show exactly where the contamination is located and produce full colour salt density maps in 2D or 3D.

"Four Bresle-equivalent readings in 2½ minutes"

Each filter paper is the size of four Bresle patches - the Elcometer 130 Soluble Salt Profiler not only displays the single reading, but also provides four Bresle-equivalent readings in just over two minutes.

View the Elcometer 130 SSP Bresle Patch Equivalence Report.

"The new Elcometer 130 SSP not only measures soluble salt content"

In addition to soluble salt content (purity) or conductivity, the Elcometer 130 SSP performs a detailed analysis of the test area - providing an accurate salt density profile map and pinpointing areas of high contamination outside user-defined limits.

"Accurate in all environments"< /span>

This new, easy-to-use Elcometer 130 SSP features automatic temperature compensation to ensure accuracy in all climatic conditions. Impure water can be compensated for accurate and repeatable readings.

"Every meter is built to last"

Rugged, durable & The new Elcometer 130 SSP is waterproof and comes with a 2 year manufacturer's warranty. gives you peace of mind.

"Create instant reports on your PC, Android™ or iOS mobile devices"

The Elcometer 130 SSP wirelessly transmits readings, statistics and batches via ^Bluetooth® or via USB directly into an inspection application or into ElcoMaster^®, Elcometer''s mobile app for instant reporting at your desk or with your mobile phone in the field.

What you do with the data you collect is just as important as the measurement itself.

"Calibration check - peace of mind"

A calibration verification tile is available to check the accuracy of the meter on site. The verification date is recorded for use in reports.

Calibration verification tile available to check the accuracy of the meter.

Key features of the Elcometer 130 Soluble Salts Profiler include:

• Choice of measurement modes:
  • Cleanliness: two measurement options are available when measuring soluble salts. Bresle method equivalent mode or Elcometer 130 equivalent mode
  • Conductivity: ideal for measuring ionic impurities, sometimes referred to as total dissolved solids - TDS, in a solution
• Multi-point conductivity sensor allows the conductivity trend to be displayed as a density map
• Automatic temperature compensation ensures accurate results
• Large colour LCD screen displays readings in µg/cm², ppm, µS/cm, mS/cm, % salinity or mg/m²
• Stores up to 3,500 sets of readings in1,000 alphanumeric batches
• Non-oxidising, gold-plated contacts ensure lifetime performance
• Transfer data via USB or ^Bluetooth® to ^ElcoMaster® for instant reporting

Display modes

How to use the Elcometer 130 Soluble Salt Profiler

td>
1. wear clean disposable gloves (supplied) and fill a syringe with exactly 1.6 ml of deionised water.	2. use tweezers to remove a filter paper from the pack and place it on the clean, unlabelled side of the magnetic disc provided.	3. spread the water from the syringe evenly over the entire filter paper and remove any bubbles from under the paper.
4. place the magnetic disc with the moistened paper facing down on the area to be tested, press firmly into any contours or irregularities and start the 2 minute timer on the meter.	5 After two minutes, carefully remove the filter paper and magnetic disc from the test surface and place them on the measuring electrodes.	6. as each filter paper remains on the surface for two minutes, multiple tests can be performed simultaneously, further reducing inspection times.
7. close the lid and ensure that the magnetic catch is fully engaged. The measuring device starts measuring.	8. the measured value is shown on the screen in the selected display mode.	9. place the filter paper in a resealable bag (included in the scope of delivery) if required for further analysis.

Elcometer 130 SSP: Made for iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPhone 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad (3rd and 4th generation), iPad mini, iPad 2 and iPod touch (5th generation).

"Made for iPod" "Made for iPhone," he says. and "Made for iPad"; means that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple assumes no responsibility for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone or iPad may affect wireless performance.

iPad, iPhone and iPod touch are trademarks of Apple Inc. registered in the U.S. and other countries. App Store is a trademark of Apple Inc. registered in the U.S. and other countries. Suitable for mobile devices with Android™ software version 2.1 and higher. Android™ and Google Play are trademarks of Google Inc.