DeVILBISS PROLITE E spray gun boiler

The DeVilbiss PRO Lite E is the more powerful version of the PRO Lite, which has been specially developed for the heavy-duty processing of ceramic and glass enamel.

The material paths in the coated gun body are lined with a special sealing material so that the coating material only comes into contact with stainless steel. This prevents corrosion problems or material incompatibility.

The gun body is provided with a special coating. This simplifies cleaning and also increases the resistance of the device.

The needle of the spray gun is provided with a special wear-resistant needle packaging to prevent the aggressive effect of ceramic coatings on the sliding needle shaft.

Advantages

• Forged aluminium gun body with black Quickclean™ coating and special needle packing for a longer service life
• Comprehensive range of conventional air caps
• Wide range of nozzles and needles in stainless steel, hardened steel or carbide for all abrasive materials
• Stainless steel material paths with larger inner diameter for flow rates of up to 3.5 l/min for heavy ceramic glazes

Typical areas of application

• All glaze and enamel coatings
• Stoving enamels
• Almost all abrasive materials
• Difficult to apply materials and high solids

A PRO Lite for ceramics!

A gun specially designed for ceramics on a
a PRO Lite body

• The PRO Lite E
• But let's also look at the additional
  features...

Pro Lite E specifications

The ceramics industry has specific requirements for spray gun design

• Demanding spraying environment
• Service life of the needle seal
• Needle and nozzle service life
• Atomisation of dense and heavy coating materials
• Designed for material flow rates < 3.5 litres/min
• Conventional air atomisation to achieve the required energy levels
  energy levels
• Smaller size and lower weight for long spraying times

QuickClean

QuickClean is our trademarked term for a patented, modified aluminium anodising process developed in the USA.

• It has been successfully used on DeVilbiss Tekna manual spray guns, which have been sold in the USA since 2010.
• In the process, a hard anodised layer is impregnated with PTFE to achieve a coating with better properties than the normal hard anodised coatings.
• Higher wear and abrasion resistance
• Cleanability: Significantly reduces dirt adhesion and simplifies cleaning.
  cleaning
• Excellent corrosion resistance - water-based and acidic coatings
• Increased hardness: Spray gun body with longer service life

What makes the QuickClean body so special?

• QuickcleanTM coating of body (inside and outside)
• 1.8, 2.2 and 2.8 TC nozzle and needle available (suitable for 62, 64 and 67 air caps)
• Modified material needle profiles for 2.8, 2.2, 1.8 and 1.4 ceramic material nozzles
• No air baffle (improved air flow at high inlet pressure, less risk of confusion for the operator)
• Multi-layer needle seal design (Upgradeable seal for paint, ceramic or UV coatings)
• Stainless steel material paths (Increased corrosion resistance with
  ceramic and enamel coatings)
• Enlarged diameter of the material paths (Reduced resistance with
  material flows of ceramic coatings with high viscosity/high volume)
• External hexagon on material inlet adapter (easy removal of material supply hose in the event of freezing)
• Optional hexagonal adjusting screw for needle seal (effortless seal change)
• Nickel-plated brass retaining ring (maximum abrasion and corrosion resistance in ceramic environments)
• New specifically designed front end attachments to duplicate and exceed the performance of JGA 62AC, 64D and 67E
• A range of alternative caps and nozzles are available for this gun

Typical applications and market segments

• Stoving enamel
• Ceramic glaze
• Refractory coatings
• Sanitary ceramics
• Tableware
• Gift articles
• Stove enamelled articles
• Bricks, tiles, concrete and slabs
• Refractory coatings