Stick and Go® 100 cm x 25 m
€251.40*
% €295.76* (15% saved)Ready for shipping in 1-3 days
Specifications
3 versions: 60 cm x 10 m, 60 cm x 25 m and 100 cm x 25 m.
Stick & Go® quick and effective protection of surfaces such as stainless steel table tops
Due to its thickness, the film is resistant, does not tear and has a high abrasion resistance. It is easy to unroll and has good adhesion. The film is easy to remove. Easy to cut with the magnetic film cutter or with electric film scissors. It can be processed using a Colad film dispenser.
Features and advantages
- White colour for optimum reflective properties
- Resistant to chemicals and solvents
- Solid and resistant
- Corrugated anti-slip surface
- Easy to apply and cut
- Not antistatic
Technical data
- Material: Polypropylene (PP)
- Melting point: 120°C
- Colour: White
- Width: 60 or 100 cm
- Length: 10 or 25 metres
- Thickness: 220 micron
- Surface: Rough, for safe working, non-slip
- Application temperature: Between 15°C and 40°C
- Packaging: Per roll in a cardboard box
ATEX
Colad Stick & Go® is not conductive. To determine whether Stick & Go® is suitable for use in your ATEX work area, the user is responsible for identifying and assessing the risks associated with the product in accordance with the ATEX User Directive 1999/92/EC.
In accordance with the requirements of EN 60079-32-1, the user may find that Stick & Go® could be suitable for use on electrically conductive surfaces for explosion groups IIA and IIB, for example on stainless steel mixing tables in zone 2, as the product is not thicker than 2 mm. The risks and conformity must always be assessed by the user and are always the responsibility of the user in accordance with the ATEX User Directive 1999/92/EC.
#Although Stick & Go® is non-conductive, it cannot be applied to the floor of an ATEX area (Zone 0-1-2/20-21-22).
## The user should always determine and assess whether the Stick & Go® product will cause risks in their process. It is the user's responsibility to fulfil the requirements of the ATEX User Directive 1999/92/EC and to determine whether Stick & Go® can be safely used in their process.
### Only persons with sufficient knowledge of the ATEX User Directive 1999/92/EC may assess the risk in an ATEX area.
IF IN DOUBT, DO NOT USE THE PRODUCT AND CONSULT AN ATEX EXPERT!
- Product number: 1006311
- Manufacturer: Colad
- EAN: 8714247028841
- Weight: 4.566 kg
- Length: 1020 mm
- Width: 160 mm
- Height: 160 mm
Register
