Beschichtpunkt Automatic Spray Gun with 1.8 mm nozzle

The SA-2C automatic spray gun has been developed for stationary use in automated coating systems. It enables precise and reproducible material application and is suitable for continuous production processes with high demands on coating quality and process reliability. Thanks to a range of nozzle options, the spray gun can be adapted to different materials and application rates.

System & Application

The SA-2C is designed for automated spraying processes in industrial coating systems. Thanks to its automatic control, it is particularly suitable for series production, continuous production runs and applications with consistent quality requirements. The various nozzle diameters allow for the processing of a wide variety of coating materials as well as adaptation to the desired material throughput.

Product variants

SA200010 – SA-2C automatic spray gun with 1.0 mm nozzle
SA200012 – SA-2C automatic spray gun with 1.2 mm nozzle
SA200015 – SA-2C automatic spray gun with 1.5 mm nozzle
SA200018 – SA-2C automatic spray gun with 1.8 mm nozzle
SA200020 – SA-2C automatic spray gun with 2.0 mm nozzle
SA200025 – SA-2C automatic spray gun with 2.5 mm nozzle

Technical Specifications

Equipment type: SA-2C automatic spray gun
Available nozzle diameters: 1.0 mm / 1.2 mm / 1.5 mm / 1.8 mm / 2.0 mm / 2.5 mm
Operating mode: Automatic material application
Area of application: Automated coating and painting systems
Field of application: Mass production and continuous production processes

The different nozzle variants allow for precise adaptation to material viscosity, coating material and the desired film thickness. Smaller nozzles are suitable for fine coatings and controlled material application, whilst larger nozzles allow for higher material volumes and increased throughput.

The automatic design ensures consistent coating results and contributes to process stability in applications involving repetitive production cycles.

Note: The product information provided does not include any further technical data such as operating pressure, air consumption, connection sizes, control type, weight or material construction. This information should only be supplemented by referring to the technical documentation.