%
Two-component spraying - easy and affordable Graco XP multi-component sprayers are designed to pump, mix and atomise high viscosity, high solids coatings with first class results. When you switch from hand mixing, you will quickly realise that the XP offers an excellent return on investment by reducing material waste and using less solvent when cleaning. Optimised for low pressure airless spraying applications, Graco XP35 has a similar flow capacity to XP70 but with a smaller NXT 3400 air motor. The XP35 is an ideal replacement for Graco's Bulldog Hydra-Cat systems. For applying protective coatings at low pressure Reduces material waste No throwing away of unused mixed material at the end of the working day Saves money on cleaning as less solvent is used Consistent material quality - no guesswork or human error when measuring materials Easy to operate - minimal training required Reduces maintenance costs Rated to 50 MPa (500 bar, 7250 psi) to handle viscous materials and long hose lengths
Price excl. VAT
%
High energy costs associated with compressor-driven air-operated diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater for high-flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80%. In addition to savings on energy costs, Graco's long-lasting diaphragm pumps also reduce maintenance costs and equipment downtime. Energy-efficient electric drive – Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80%. Shutdown under pressure – This prevents pump failures due to clogged lines or closed valves. Sealless diaphragm pump – Leakage and pump failures due to dry running are avoided. Low pulsation and consistent flow – constant material quality Durable component materials – slurries and abrasives can be pumped without damaging the pump Favourite features of the diaphragm pump – Gentle on shear-sensitive material, runs dry, self-priming
Price excl. VAT
%
This 2-ball lower pump is suitable for applications requiring high pressure up to 3000 psi (206 bar). The minimal swing during changeover enables smoother coating. Five times more efficient than comparable air-powered pumps The pump can be operated in two different modes – constant pressure or constant flow. The quiet electric motor makes for a more pleasant working environment, and you can stay near the pump for longer periods of time Minimal vibration during refitting enables smoother coating Built-in dry-run protection safeguards your pump against premature wear and tear and prevents costly material loss
Price excl. VAT
%
High energy costs associated with compressor-driven air diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater with high flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80 %. In addition to savings on energy costs, Graco's long-life diaphragm pumps also reduce maintenance costs and system downtime. Energy-efficient electric drive - Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80 %. Switch off under pressure - This prevents pump failures due to clogged pipes or closed valves. Sealless diaphragm pump - Leakages and pump failures due to dry running are avoided. Low pulsation and consistent flow - Consistent material quality Durable component materials - Slurries and abrasives are pumped without pump damage Favourite features of the diaphragm pump - Gentle on shear-sensitive material, runs dry, self-priming
Price excl. VAT
The E-Flo SP electric supply pump is designed for industrial and automotive sealant and adhesive applications. This advanced pump will dramatically increase efficiency, improve system control, optimise process performance and provide critical performance data. Improve process and system performance Advanced material control Significant energy savings Reduced compressed air consumption Extremely quiet motor Avoiding downtime Low maintenance costs
Price excl. VAT
%
The solution for demanding conveying tasks. Reliably pump longer with proven quality and leading technology from Graco. Electrically driven Husky double diaphragm pumps are at the cutting edge of pump technology, giving you a big reduction in operating costs and more control over your process. Typical applications include chemicals, paints, oil and gas, water and wastewater in manufacturing and mine dewatering. Flow rate up to 833 l/min Up to 80 % reduction in energy consumption compared to air-operated diaphragm pumps Pump spare parts last up to 5 times longer compared to other brands Pump solids, slurries and abrasive materials without damage to the pump or material shear Low pulsation without costly pulsation dampeners Noise level in production close to 0 dB Accurate material dosing with frequency converters (sold separately) No expensive, wear-sensitive mechanical seals Dry-running, self-priming and switch-off under pressure
Price excl. VAT
The E-Flo SP electric feed pump has been developed for the application of sealants and adhesives in industrial and automotive applications. This advanced pump will dramatically increase efficiency, improve system control, optimise process performance and deliver key performance data. Improve process and system performance Advanced material control Significant energy savings Less compressed air consumption Extremely quiet motor Avoidance of downtime Low maintenance costs
Price excl. VAT
%
High energy costs associated with compressor-driven air diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater with high flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80 %. In addition to savings on energy costs, Graco's long-life diaphragm pumps also reduce maintenance costs and system downtime. Energy-efficient electric drive - Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80 %. Switch off under pressure - This prevents pump failures due to clogged pipes or closed valves. Sealless diaphragm pump - Leakages and pump failures due to dry running are avoided. Low pulsation and consistent flow - Consistent material quality Durable component materials - Slurries and abrasives are pumped without pump damage Favourite features of the diaphragm pump - Gentle on shear-sensitive material, runs dry, self-priming
Price excl. VAT
%
High energy costs associated with compressor-driven air diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater with high flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80 %. In addition to savings on energy costs, Graco's long-life diaphragm pumps also reduce maintenance costs and system downtime. Energy-efficient electric drive - Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80 %. Switch off under pressure - This prevents pump failures due to clogged pipes or closed valves. Sealless diaphragm pump - Leakages and pump failures due to dry running are avoided. Low pulsation and consistent flow - Consistent material quality Durable component materials - Slurries and abrasives are pumped without pump damage Favourite features of the diaphragm pump - Gentle on shear-sensitive material, runs dry, self-priming
Price excl. VAT
%
High energy costs associated with compressor-driven air-operated diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater for high-flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80%. In addition to savings on energy costs, Graco's long-lasting diaphragm pumps also reduce maintenance costs and equipment downtime. Energy-efficient electric drive – Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80%. Shutdown under pressure – This prevents pump failures due to clogged lines or closed valves. Sealless diaphragm pump – Leakage and pump failures due to dry running are avoided. Low pulsation and consistent flow – constant material quality Durable component materials – slurries and abrasives can be pumped without damaging the pump Favourite features of the diaphragm pump – Gentle on shear-sensitive material, runs dry, self-priming
Price excl. VAT
%
High energy costs associated with compressor-driven air diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater with high flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80 %. In addition to savings on energy costs, Graco's long-life diaphragm pumps also reduce maintenance costs and system downtime. Energy-efficient electric drive - Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80 %. Switch off under pressure - This prevents pump failures due to clogged pipes or closed valves. Sealless diaphragm pump - Leakages and pump failures due to dry running are avoided. Low pulsation and consistent flow - Consistent material quality Durable component materials - Slurries and abrasives are pumped without pump damage Favourite features of the diaphragm pump - Gentle on shear-sensitive material, runs dry, self-priming
Price excl. VAT
%
High energy costs associated with compressor-driven air diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater with high flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80 %. In addition to savings on energy costs, Graco's long-life diaphragm pumps also reduce maintenance costs and system downtime. Energy-efficient electric drive - Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80 %. Switch off under pressure - This prevents pump failures due to clogged pipes or closed valves. Sealless diaphragm pump - Leakages and pump failures due to dry running are avoided. Low pulsation and consistent flow - Consistent material quality Durable component materials - Slurries and abrasives are pumped without pump damage Favourite features of the diaphragm pump - Gentle on shear-sensitive material, runs dry, self-priming
Price excl. VAT
%
High energy costs associated with compressor-driven air-operated diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater for high-flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80%. In addition to savings on energy costs, Graco's long-lasting diaphragm pumps also reduce maintenance costs and equipment downtime. Energy-efficient electric drive – Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80%. Shutdown under pressure – This prevents pump failures due to clogged lines or closed valves. Sealless diaphragm pump – Leakage and pump failures due to dry running are avoided. Low pulsation and consistent flow – constant material quality Durable component materials – slurries and abrasives can be pumped without damaging the pump Favourite features of the diaphragm pump – Gentle on shear-sensitive material, runs dry, self-priming
Price excl. VAT
Comparative research has shown that our E-Flo DC (Dual Control) electric circulation pump is up to five times more efficient than pneumatic pumps of comparable size - good for your energy and cost balance! This sealed bottom pump has a significantly reduced maintenance requirement and is suitable for any pumping application in your paint mixing room - including catalysed coatings The minimised vibration during conversion enables more even coating The electric motor is protected against icing, ensuring consistent pump operation and even better end product results The quiet electric motor makes working more comfortable and you can stay close to the pump for longer periods of time
Price excl. VAT
Two-component spraying - simple and cost-effective The XP-hf system combines the popular XP70 sprayers with the powerful XL 10000 air motor. The combination of these two technologies ensures a higher flow rate for faster completion of your jobs and less wear and tear. Designed for higher flow rates, the Graco Xp70-hf is ideal for applications that require spraying with multiple guns or larger nozzle sizes. Flexible options for mix ratio, pressure and flow rate: Choose the system best suited to your application. If you occasionally change materials, Graco XP sprayers are the right choice. This is because you can easily change the mixing ratio by replacing one or both lower pumps. Available in mixing ratios of 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1. High-pressure performance for two-part high-strength coatings Reduces material waste No throwing away of unused mixed material at the end of the working day Saves money on cleaning as less solvent is used Consistent material quality - no guesswork or human error when measuring materials Easy to operate - minimal training required Reduces maintenance costs Rated to 50 MPa (500 bar, 7250 psi) to handle viscous materials and long hose lengths
Price excl. VAT
Two-component spraying - simple and cost-effective The XP-hf system combines the XP50 sprayers with a powerful XL 10000 air motor. The combination of these two technologies ensures a higher flow rate for faster completion of your jobs and less wear and tear. Flexible options for mixing ratio, pressure and flow rate: choose the system best suited to your application. If you occasionally change materials, Graco XP sprayers are the right choice. This is because you can easily change the mixing ratio by replacing one or both lower pumps. Available in mixing ratios of 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1. For higher-volume protective coatings. Reduces material waste No throwing away of unused mixed material at the end of the working day Saves money on cleaning as fewer solvents are used Consistent material quality - no guesswork or human error when measuring materials Easy to operate - minimal training required Reduces maintenance costs Rated to 5000 psi (345 bar) to handle viscous materials and long hose lengths
Price excl. VAT
Two-component spraying - simple and cost-effective The XP-hf system combines the XP50 sprayers with a powerful XL 10000 air motor. The combination of these two technologies ensures a higher flow rate for faster completion of your jobs and less wear and tear. Flexible options for mixing ratio, pressure and flow rate: choose the system best suited to your application. If you occasionally change materials, Graco XP sprayers are the right choice. This is because you can easily change the mixing ratio by replacing one or both lower pumps. Available in mixing ratios of 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1. For higher-volume protective coatings. Reduces material waste No throwing away of unused mixed material at the end of the working day Saves money on cleaning as fewer solvents are used Consistent material quality - no guesswork or human error when measuring materials Easy to operate - minimal training required Reduces maintenance costs Rated to 5000 psi (345 bar) to handle viscous materials and long hose lengths
Price excl. VAT
%
Two-component spraying – simple and affordable. Graco XP50 plural component sprayers are designed to pump, mix and atomise high solids coatings with excellent results. If you are switching from manual mixing, you will quickly see that the XP offers an excellent return on investment by reducing material waste and the amount of solvent used for cleaning. Flexible options for mixing ratio, pressure and flow rate: Choose the system that best suits your application. If you occasionally change materials, then Graco XP sprayers are the right choice. Simply change the displacement of one or both displacement pumps to change the ratio. Available in 1:1, 1.5:1, 2:1, 2.5:1, 3:1, and 4:1 ratios. For higher-volume protective coatings. Reduces material waste No discarding of unused mixed material at the end of the day Saves money on cleaning because less solvent is used Consistent material quality – no guesswork or human error in measuring materials Easy to use – minimal training required Reduces maintenance costs Rated at 5000 psi (345 bar) to handle viscous materials and long hose lengths
Price excl. VAT
%
High energy costs associated with compressor-driven air diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater with high flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80 %. In addition to savings on energy costs, Graco's long-life diaphragm pumps also reduce maintenance costs and system downtime. Energy-efficient electric drive - Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80 %. Switch off under pressure - This prevents pump failures due to clogged pipes or closed valves. Sealless diaphragm pump - Leakages and pump failures due to dry running are avoided. Low pulsation and consistent flow - Consistent material quality Durable component materials - Slurries and abrasives are pumped without pump damage Favourite features of the diaphragm pump - Gentle on shear-sensitive material, runs dry, self-priming
Price excl. VAT
%
Clean your facility quickly, easily and efficiently with Graco Hydra-Clean compressed air cleaners. The system with the Graco NXT air motor is ideal for industrial and hygienic applications such as food processing plants, heavy cleaning, maintenance, shipyards, oil rigs and much more. Ideal for heavy-duty cleaning and maintenance work for industrial and hygienic applications Excellent for high-pressure cleaning and sanitary applications Meets common requirements in terms of pressure, flow rate and material For open universal drums For use with cold or hot water up to 93 °C (200 °F) Portable and can be sprayed downwards - suitable for sanitary applications Multiple spray guns can be used Effective cleaning with water, cleaning agents or chemical liquids
Price excl. VAT
Two-component spraying - simple and affordable The Graco XP70 multi-component sprayer is designed to pump, mix and atomise high solids (up to 100%) coatings with superior results. In addition, the XP70 is designed to be flow fed, eliminating the need for feed pumps and reducing costs. When switching from manual mixing, you will quickly realise that the XP70 offers an excellent return on investment by reducing material waste and using less solvent during cleaning. Flexible options for mix ratio, pressure and flow rate: Choose the system best suited to your application. If you occasionally change materials, Graco XP sprayers are the right choice. This is because you can easily change the mixing ratio by replacing one or both lower pumps. Available in mixing ratios of 1:1, 1.5:1, 2:1, 2.5:1, 3:1 and 4:1. High-pressure performance for two-part high-strength coatings Reduces material waste No throwing away of unused mixed material at the end of the working day Saves money on cleaning as less solvent is used Consistent material quality - no guesswork or human error when measuring materials Easy to operate - minimal training required Reduces maintenance costs Rated to 50 MPa (500 bar, 7250 psi) to handle viscous materials and long hose lengths
Price excl. VAT
%
Comparative research has shown that our E-Flo DC (Dual Control) electric circulation pump is up to five times more efficient than pneumatic pumps of comparable size - good for your energy and cost balance! This sealed bottom pump has a significantly reduced maintenance requirement and is suitable for any pumping application in your paint mixing room - including catalysed coatings The minimised vibration during conversion enables more even coating The electric motor is protected against icing, ensuring consistent pump operation and even better end product results The quiet electric motor makes working more comfortable and you can stay close to the pump for longer periods of time
Price excl. VAT
%
The solution for demanding conveying tasks. Reliably pump longer with proven quality and leading technology from Graco. Electrically driven Husky double diaphragm pumps are at the cutting edge of pump technology, giving you a big reduction in operating costs and more control over your process. Typical applications include chemicals, paints, oil and gas, water and wastewater in manufacturing and mine dewatering. Flow rate up to 833 l/min Up to 80 % reduction in energy consumption compared to air-operated diaphragm pumps Pump spare parts last up to 5 times longer compared to other brands Pump solids, slurries and abrasive materials without damage to the pump or material shear Low pulsation without costly pulsation dampeners Noise level in production close to 0 dB Accurate material dosing with frequency converters (sold separately) No expensive, wear-sensitive mechanical seals Dry-running, self-priming and switch-off under pressure
Price excl. VAT
Comparative research has shown that our E-Flo DC (Dual Control) electric circulation pump is up to five times more efficient than pneumatic pumps of comparable size - good for your energy and cost balance! This sealed bottom pump has a significantly reduced maintenance requirement and is suitable for any pumping application in your paint mixing room - including catalysed coatings The minimised vibration during conversion enables more even coating The electric motor is protected against icing, ensuring consistent pump operation and even better end product results The quiet electric motor makes working more comfortable and you can stay close to the pump for longer periods of time
Price excl. VAT
%
Two-component spraying – simple and cost-effective. Hydraulic XP-h sprayer – The hydraulic Xp-h multi-component sprayer with patented Xp mixing ratio technology is ideal for small truck, palletising, trailer or low loader systems that have an internal hydraulic supply*. Well suited for OEM road marking applications. The system's hydraulic motor has been optimised and sized to the pressure capabilities of the NXT 6500 air motor used on Graco XP50 and XP70 sprayers. GH Power Pack Accessories – The XP is now more versatile than ever for contractors who want to take advantage of the convenience and efficiency of a gas-powered hydraulic system. Hydraulic systems are energy efficient and allow for easy, smooth switching on the XP. This guarantees balanced pressures and the most even spray pattern possible. Hydraulic drive, powerful and cost effective Use in situations where a customer just wants to pull a trailer and not have to use a large tow-truck compressor. Use for applications where a contractor already has small generators for the XP material heaters and small compressors that can operate a solvent pump or feed pumps with the XP. (Hydraulic solvent pumps are available separately from Graco, but a manifold must be installed on the XP) Rated at 5000 psi (345 bar) Mixing ratio for protective coatings: 3:1 Available as a floor or wall-mounted unit Fits standard XP cart
Price excl. VAT
%
The Graco XP70 multi-component sprayer is designed to pump, mix and atomise high viscosity, high solids coatings with superior results. In addition, the XP70 is designed to be flow fed, eliminating the need for feed pumps and reducing costs. When switching from manual mixing, you will quickly realise that the XP70 offers an excellent return on investment by reducing material waste and using less solvent during cleaning. High pressure performance for two-part high strength coatings Reduces material waste No throwing away of unused mixed material at the end of the working day Saves money on cleaning as less solvent is used Consistent material quality - no guesswork or human error when measuring materials Easy to operate - minimal training required Reduces maintenance costs Rated to 50 MPa (500 bar, 7250 psi) to handle viscous materials and long hose lengths
Price excl. VAT
%
The Graco XP70 plural-component sprayer was developed to pump, mix and atomise high-viscosity and high-solids coatings with excellent results. In addition, the XP70 was designed for flow delivery, eliminating the need for supply pumps and reducing costs. If you are switching from manual mixing, you will quickly see that the XP70 offers an excellent return on investment by reducing material waste and the amount of solvent used for cleaning. High pressure performance for two-part high-strength coatings Reduces material waste No more discarding unused mixed material at the end of the day Saves money on cleaning as less solvent is used Consistent material quality – no guesswork or human error in measuring materials Easy to use – minimal training required Reduces maintenance costs Rated at 50 MPa (500 bar, 7250 psi) to handle viscous materials and long lengths of tubing
Price excl. VAT
%
The Graco XP70 multi-component sprayer is designed to pump, mix and atomise high viscosity, high solids coatings with superior results. In addition, the XP70 is designed to be flow fed, eliminating the need for feed pumps and reducing costs. When switching from manual mixing, you will quickly realise that the XP70 offers an excellent return on investment by reducing material waste and using less solvent during cleaning. High pressure performance for two-part high strength coatings Reduces material waste No throwing away of unused mixed material at the end of the working day Saves money on cleaning as less solvent is used Consistent material quality - no guesswork or human error when measuring materials Easy to operate - minimal training required Reduces maintenance costs Rated to 50 MPa (500 bar, 7250 psi) to handle viscous materials and long hose lengths
Price excl. VAT
%
With scoop piston, rod and cylinder.
Price excl. VAT
%
Two-component spraying – simple and affordable. Graco XP plural-component sprayers have been designed to pump, mix and atomise high-viscosity and high-solids coatings with excellent results. If you switch from manual mixing, you will quickly see that the XP offers an excellent return on investment by reducing material waste and the amount of solvent used for cleaning. Optimised for low-pressure airless spray applications, the Graco XP35 has a similar flow capacity to the XP70 but with a smaller NXT 3400 air motor. The XP35 is an ideal replacement for Graco's Bulldog Hydra-Cat systems. For low-pressure protective coating applications Reduces material waste No discarding of unused mixed material at the end of the day Saves money on cleaning because less solvent is used Consistent material quality – no guesswork or human error in measuring materials Easy to use – minimal training required Reduces maintenance costs Rated at 50 MPa (500 bar, 7250 psi) to handle viscous materials and long lengths of tubing
Price excl. VAT
