Finixa Polishing Case MHW POL 62: Complete Set for Paint Correction, Gloss, and Protection
The Finixa Polishing Case MHW POL 62 combines an electric polishing machine, 1-step polishing compound, various polishing pads, microfiber cloths, and MHW hand and machine wax. This makes the set particularly suitable for users who want to implement paint correction, finishing, and a protective layer in a coordinated workflow.
Product Overview: What is included in the Finixa POL 62?
The set is designed for a complete polishing process: defect correction with polishing paste, coordination via various pads, finishing with microfiber cloths, and final paint protection with MHW 05.
| Component | Benefit in Workflow |
|---|---|
| POL 55 Electric Polishing Machine | Rotary polishing machine with 1050 W, 2:1 gear ratio, 700–2500 RPM, 5m cable, M14 thread, and 2.6 kg weight. |
| POL 10 1-Step Polishing Compound | For an efficient polishing process using only one compound. |
| POP 314 Red Pads | For stronger correction work; test carefully depending on paint condition. |
| POP 714 Orange Pads, Open-Cell | Balanced correction and temperature control due to open cell structure. |
| POP 514 White Pads, Closed-Cell | For controlled polishing and even product distribution. |
| POP 914 Black Finishing Pads | For finishing, high gloss, and machine application of wax. |
| MHW 05 Hand and Machine Wax | Protective layer after polishing; can be applied by hand or machine. |
| 5 Microfiber Cloths POL 40 | For removing polish and wax residues as well as for the final buffing. |
Recommended Basic Settings as Guidelines
The following values are practice-oriented guidelines. Paint hardness, pad condition, amount of polish, and temperature can influence the result. A test spot is recommended before working on any surface.
| Application | Pad | Speed | Note |
|---|---|---|---|
| Distributing Polish | Suitable Polishing Pad | Approx. 700–1000 RPM | Distribute product evenly over a small area. |
| Paint Correction | Red or Orange | Approx. 1200–1800 RPM | Control pressure and temperature, avoid edges. |
| Finish | White or Black | Approx. 900–1400 RPM | Reduce pressure and buff out cleanly. |
| MHW Wax (Machine) | Soft Black Pad | Approx. 1200 RPM | Apply thinly, allow to flash briefly, and remove with microfiber cloth. |
Professional Workflow in 6 Steps
- Clean and Inspect: Wash the surface thoroughly, degrease, and assess the paint condition under good light.
- Set up Test Spot: Start with a mild pad and polish combination, check the result.
- Distribute Polish: Place the machine on the surface, only then switch it on and distribute polish at a low speed.
- Correction: Work in overlapping passes, modulate pressure, and do not overheat the surface.
- Buff out Finish: Reduce pressure, rework with a soft pad, and remove polish residue with a microfiber cloth.
- Protect: Apply MHW 05 thinly by hand or machine, let it flash, and buff out excess product cleanly.
Troubleshooting: Typical Problems and Quick Solutions
1. Holograms or Haze
- Use a softer pad.
- Reduce speed and pressure.
- Rework with a clean microfiber cloth and a fresh finishing pad.
2. Polish Dries Too Quickly
- Work on smaller sub-sections.
- Do not work on one spot for too long.
- Brush out or change the pad regularly.
3. Machine Runs Unsteadily
- Attach the pad centered.
- Check the backing plate and pad for damage.
- Only use accessories within the permitted speed range.
4. Insufficient Defect Correction
- Reduce the working area and drive more even passes.
- Test a slightly more aggressive pad.
- Increase speed moderately without overheating the paint or pad.
Maintenance and Safe Handling
- Disconnect the power plug before changing accessories or cleaning.
- Clean polishing pads after use and allow to dry completely.
- Regularly clear ventilation slots of dust and polishing residues.
- Check cable, plug, backing plate, and pad before every use.
- Do not continue to use damaged accessories; use professional service for defects.
Buy Finixa POL 62 directly at Beschicht.com
Complete set for polishing, finishing, and paint protection – ideal for professional detailing and workshop practice.
To the ProductFAQ about the Finixa Polishing Case MHW POL 62
Is the POL 62 more suitable for beginners or professionals?
The set is built for practical use and can be used by experienced beginners as well as professionals. A controlled test spot and safe handling of a rotary machine are important.
What speed is sensible for MHW 05 wax?
As a guideline, a medium speed around 1200 RPM with a soft pad is suitable for the POL 55. The wax should be applied thinly and then removed with a microfiber cloth.
Which pads are intended for the finish?
The soft black finishing pads are the most obvious choice for finish and wax. Depending on the paint and polish, a milder white pad can also be sensible.
Can I use the machine for sanding?
The workflow is designed for polishing and finishing. For sanding work, only machines, accessories, and manufacturer approvals intended for that purpose should be used.
How do I avoid edge or heat damage?
Do not work on one spot for a long time, modulate pressure, control the speed, and process edges very carefully. Check pad and paint temperature regularly.
Conclusion
The Finixa Polishing Case MHW POL 62 is a sensibly assembled complete set for anyone who wants to implement paint correction, high-gloss finishing, and protection in a coordinated system. The combination of the POL 55 machine, multiple pad hardnesses, 1-step polishing compound, and MHW wax is particularly strong – provided the application is carried out in a controlled manner, with a test spot and suitable speed.
