Manufacturer no.:
P29024
Reactor E-XP1 complete dosing unit, Probler P2 gun, heated hose with wear protection, 10 kW, 230 V, 1-ph.
Price on request
Ready for shipping in 5-8 Werktage
Also interesting
Product information
The Reactor E-XP1 dispenser from Graco has been developed for processing and spraying polyurea and other coatings that require high pressures. The hybrid heater and heated hose adjust the materials to the correct viscosity before mixing. The quick-disassemble bottom pump for easy maintenance, easy-to-use controls and rugged, mobile design make the Reactor the preferred choice for coating applications.
For polyurea coatings - applies up to 3.8 litres (1.0 gal.) per minute
- Powerful hybrid heater provides up to 10,200 watts of heat output to quickly preheat the material
- Digital heat and pressure regulators
Heater control cards
- Modular heater with longer service life
- Reduction in downtime
Pumps
- Quickly dismantled lower pumps for easy maintenance
Hose heater transformer
- Settings of the tapping points
- Hose heat exchanger that does not require tap point adjustments
| Application: | Protective coatings |
|---|---|
| Applicator type: | Hand- |
| Compatible material: | Multicomponent materials |
| Component A, inlet size (inch): | 1/2 |
| Component A, inlet size (mm): | 12.7 |
| Component A, thread type: | JIC |
| Component B, inlet size (mm): | #10 |
| Component B, outlet size (inch): | 5/8 |
| Component B, outlet size (mm): | 15,875 |
| Component B, thread type: | JIC |
| Component type: | Two-component |
| Frequency (Hz): | 50/60 |
| Gender of the material inlet thread: | Internal thread |
| Gun type: | Problem P2 |
| Hose length (m): | 15, 3 |
| Hose type: | Heated hose |
| Includes: | Dispenser, Probler P2 gun, Heated hose with wear protection, Heated whip end |
| Material application.: | Polyurea |
| Material inlet thread type: | NPT |
| Maximum delivery rate (L/min): | 3.79 |
| Maximum flow rate (cm³/min): | 3790 |
| Maximum material temperature (°C): | 88 |
| Maximum mixing ratio: | 1:1 |
| Model: | reactor |
| Noise pressure level, (dB(A)): | 70.2 |
| Phases: | 1 |
| Print type: | Low pressure |
| Product type: | multi-component |
| Rated power (W): | 10200 |
| Rated power (kW): | 10.2 |
| Series: | E-XP1 |
| Sink type: | solvent |
| Size of the material inlet opening (cm): | 1,905 |
| Size of the material inlet opening (inches): | 3/4 |
| Size of the material inlet opening (mm): | 19.05 |
| Sound level, (dB(A)): | 80 |
| Supply voltage: | Electric |
| Total depth (cm): | 83.8 |
| Total depth (mm): | 838 |
| Total height (cm): | 116.8 |
| Total height (mm): | 1168 |
| Total width (cm): | 78.7 |
| Total width (mm): | 787 |
| Type: | Complete dosing device |
| Voltage (V): | 230 1 PH |
| Weight (kg): | 155 |
| Wetted material: | Aluminum, Stainless Steel, Zinc Plated Carbon Steel, Brass, Carbide, Chrome, Chemical Resistant O-Rings, PTFE, UHMWPE |
More information
- Product number: 1035502
- Manufacturer: Graco
- EAN: 00633955590724
- Weight: 220.996 kg
Reviews
Register
