Reactor E-10 HP complete dosing unit, Probler P2 gun, 120 V
€23,490.24*
% €26,100.27* (10% saved)Ready for shipping in 5-8 Werktage
The Reactor E-10hp is an ideal entry-level model that is ideal for coating projects such as balconies, pools, waterproofing and protective coatings for loading areas. It is a smart and affordable investment that will contribute to the expansion of your business.
Entry-level model for pure and hybrid polyurea coatings
Digital heating controls
- Allows you to enter the exact temperatures you need
- Uses the same circuit boards as a standard Reactor unit
One-button motorised operation
- Intuitive, user friendly
Insulated tanks
- Retains heat thanks to double-walled insulation
- Smooth inner lining for easy cleaning
- Improved seal design on the lid for better moisture control
Low level sensor
- Indicates when material is low (3.8 litres / 1 gal remaining)
- No contact with materials - prevents deposits
Booster heat
- Directs unused power from the motor circuit to additional heating elements
- Additional heating power brings the material in the circuit to the desired temperature faster
Robust hybrid heater
- More energy and faster heating of the material shorten the start-up time
Motor
- Offers 50% more power than the Reactor E-10
- Better spraying performance with lower pressure drop
Quickly dismantled lower pumps
- Easy disassembly and maintenance
Temperature measuring devices in Y-sieves
- Provides accurate tank temperature measurements
Portable
- Fits through standard doors
- Suitable for standard 120V or 230V outlets
- Rugged wheels for extreme locations
- No generator is required
| Air inlet size (inches): | 1/4 |
|---|---|
| Air outlet size (inches): | 1/4 |
| Air outlet thread type: | NPSM |
| Application: | Protective coatings |
| Applicator type: | Hand- |
| Compatible material: | Multicomponent materials |
| Component type: | Two-component |
| Frequency (Hz): | 50/60 |
| Gun type: | Problem P2 |
| Hose length (m): | 10.7 |
| Includes: | Dispenser, Probler P2 gun, Unheated hose |
| Material application.: | Polyurea |
| Maximum delivery rate (L/min): | 3.79 |
| Maximum flow rate (cm³/min): | 3790 |
| Maximum material temperature (°C): | 77 |
| Maximum mixing ratio: | 1:1 |
| Maximum operating pressure (MPa): | 21 |
| Maximum operating pressure (kPa): | 20700 |
| Maximum operating pressure (psi): | 3000 |
| Maximum spray pressure (MPa): | 15.2 |
| Maximum spray pressure (bar): | 151.7 |
| Maximum spray pressure (kPa): | 15170 |
| Maximum spray pressure (psi): | 2200 |
| Model: | reactor |
| Noise pressure level, (dB(A)): | 85.6 |
| Permissible operating pressure (bar): | 207 |
| Print type: | Low pressure |
| Product type: | multi-component |
| Series: | E-10hp |
| Sink type: | solvent |
| Size of the air inlet (cm): | 635 |
| Size of the air inlet (mm): | 6.35 |
| Size of the air outlet (cm): | 635 |
| Size of the air outlet (mm): | 6.35 |
| Supply voltage: | Electric |
| Tank capacity (L): | 22.7 |
| Total depth (cm): | 91.4 |
| Total depth (mm): | 914 |
| Total height (cm): | 116.8 |
| Total height (mm): | 1168 |
| Total width (cm): | 73.7 |
| Total width (mm): | 737 |
| Type: | Complete dosing device |
| Voltage (V): | 120 |
| Wetted material: | Aluminum, brass, carbide, mild steel, chrome, PTFE, stainless steel, UHMWPE |
- Product number: 1036188
- Manufacturer: Graco
- EAN: 00633955633728
- Weight: 152.759 kg
Register
