Manufacturer no.:
656147
Husky 2150e 51 mm (2") electric diaphragm pump CP; 7.5 hp ATEX motor, no KMPSR, end flange, AL centre section, PP seat, PT ball, PT diaphragm
€19,535.10*
% €22,982.47* (15% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
High energy costs associated with compressor-driven air diaphragm pumps have a very negative impact on your profitability. The impact on operating costs is even greater with high flow pumps. The Graco Husky 2150e electric diaphragm pump reduces energy consumption by up to 80 %. In addition to savings on energy costs, Graco's long-life diaphragm pumps also reduce maintenance costs and system downtime.
- Energy-efficient electric drive - Compared to conventional air-operated diaphragm pumps, energy consumption is reduced by up to 80 %.
- Switch off under pressure - This prevents pump failures due to clogged pipes or closed valves.
- Sealless diaphragm pump - Leakages and pump failures due to dry running are avoided.
- Low pulsation and consistent flow - Consistent material quality
- Durable component materials - Slurries and abrasives are pumped without pump damage
- Favourite features of the diaphragm pump - Gentle on shear-sensitive material, runs dry, self-priming
| Air inlet size (inches): | 375 |
|---|---|
| Air inlet thread type: | NPT |
| Application: | industry |
| Ball material: | PTFE |
| Connection type: | Flange |
| Distributor O-ring material: | PTFE |
| Distributor configuration: | End opening |
| Gender of the air inlet thread: | Internal thread |
| Material: | Conductive polypropylene |
| Material inlet thread type: | flange |
| Material in the liquid housing: | Conductive polypropylene |
| Material of the centre housing: | aluminum |
| Material outlet size (cm): | 5 |
| Material outlet size (mm): | 50 |
| Material outlet thread type: | flange |
| Maximum air pressure (MPa): | 0.69 |
| Maximum air pressure (bar): | 689,476 |
| Maximum air pressure (kPa): | 689,476 |
| Maximum air pressure (psi): | 100 |
| Maximum current (A): | 20/11.5A |
| Maximum delivery rate (L/min): | 378.5 |
| Maximum material pressure (MPa): | 0.69 |
| Maximum material pressure (bar): | 689,476 |
| Maximum material pressure (kPa): | 689,476 |
| Maximum material pressure (psi): | 100 |
| Maximum motor speed (rpm): | 1800s |
| Maximum number of cycles (DH/min): | 160 |
| Maximum operating pressure (psi): | 100 |
| Maximum operating temperature (°C): | 104.44 |
| Maximum solids size (cm): | 0.64 |
| Maximum solids size (mm): | 6.35 |
| Membrane, compatible material: | PTFE |
| Membrane material: | PTFE/Polychl 2-part |
| Minimum operating temperature (°C): | 4.44 |
| Motor type: | AC motor |
| Seat material: | Polypropylene |
| Size of the exhaust air opening (inches): | 375 |
| Size of the material inlet opening (cm): | 5 |
| Size of the material inlet opening (inches): | 2 |
| Size of the material inlet opening (mm): | 50 |
| Size of the material outlet opening (inches): | 2 |
| Standards met:: | CE, ATEX |
| Supply voltage: | Electric |
| Thread of the exhaust air opening (inside/outside): | Internal thread |
| Thread of the exhaust air opening (type): | NPT |
| Transmission ratio of the pump: | 1:1 |
| Type: | Electric diaphragm pump |
| Voltage (V ac): | 240/415V |
| Wetted material: | Conductive polypropylene, PTFE |
More information
- Product number: 1035799
- Manufacturer: Graco
- EAN: 00755652669906
- Weight: 230.424 kg
- Length: 1400 mm
- Width: 1130 mm
- Height: 1140 mm
Reviews
Register
