Elcometer Sagola Classic Pro XD Flow Cup Paint Spray Gun with 21EPA Air Cap & 1.40 mm Stainless Steel Needle and Nozzle Kit
€109.09*
% €220.00* (50.41% saved)Scope of delivery
SAGOLA Classic Pro XD Spray Gun – High-Transfer Gravity-Fed Spray Gun for Automotive, Industrial, Wood & Decorative Applications (21EPA / HVLP / Conventional 25/36/28)
The SAGOLA Classic Pro XD is a high-transfer gravity spray gun designed for robustness and versatility – making it a professional solution for automotive, industrial, wood and decorative applications.
SAGOLA positions the Classic Pro XD in the mid- to high-range segment, combining high manufacturing standards with competitive prices, excellent service and a 3-year warranty.
For many users, the Classic Pro XD is also an attractive professional alternative to SATA (and comparable premium spray guns) when looking for a gun that offers excellent atomisation, high transfer efficiency and practical robustness – with a very good price-performance ratio and a 3-year warranty.
The focus is on a modern spray gun with a new body design, improved ergonomics and a very wide range of application solutions. Thanks to the new air caps, the typically high Sagola spray quality and maximum paint transfer, the Classic Pro XD is suitable for both fine finishing work and priming/filler tasks – depending on the air cap and nozzle set selected.
A key feature in daily use is the structural separation with no connecting joints between air and material (“No joints between air and paint”). This facilitates cleaning, reduces potential wear and leakage points, and increases process reliability during continuous operation.
In addition, the internal air distributor ensures that no loose parts are created which could come loose or wear out over time – a clear advantage for workshops and industrial users who rely on reliable, consistent performance.
The Classic Pro XD is also of interest to users working with smaller or mobile compressors: it is specifically designed for use with portable compressors > 2HP and utilises a low-consumption air cap, which is a real practical advantage in many workplaces.
- New body design – maximum ergonomics and high comfort in daily use
- No gaps between air and material – easier to clean, fewer points of failure
- Stainless steel nozzles & stainless steel needles – robust and durable
- New air caps (21EPA / HVLP / conventional 25/36/28) – wide range of applications from finish to primer
Details & information
Product features
The Classic Pro XD is designed for professional everyday use: robust construction, high spray quality, efficient material utilisation and easy maintenance. SAGOLA emphasises the combination of the highest manufacturing standards, competitive prices, excellent service and a 3-year warranty.
- New body design – modern, robust and designed for long-term workshop use
- Maximum ergonomics & comfort – optimised hand position for longer painting jobs
- No gaps between air and material – reduces potential problem areas and makes cleaning easier
- Internal air distributor – prevents loose parts and reduces wear and tear caused by loose components
- Stainless steel nozzle & needle – robust material combination for long-term use
- Matt chrome-plated finish – high-quality appearance and easier cleaning
- Time-saving – including maintenance and cleaning benefits and a service-friendly design
- Strict compliance with manufacturing and emissions standards – for professional, regulation-compliant operation
- Suitable for mobile compressors (> 2HP) and low-consumption air caps – practical for many businesses
- HVLP: Maximum saving and minimum mist – maximum savings, minimal mist
- 21EPA: High-performance finishes – high-quality finish
Air consumption / spray distance (system comparison):
HVLP: 355 L/min | Spray distance 12–15 cm
21EPA: 225 L/min | Spray distance 18–20 cm
Conventional 25/36/28: 155 / 205 / 240 L/min | Spray distance 18–20 cm
Key technical data (excerpt): Weight with cup 481 g, cup 650 ml, product filter 80 mesh, air connection 1/4", recommended max. inlet pressure 2 bar.
Standards & approvals (excerpt): CE, EN 1953, ATEX II 2 GX. Additionally: patented air valve and registered Community Design.
Variant overview
The Classic Pro XD is precisely tailored to the material and application through the choice of air cap and nozzle size. SAGOLA distinguishes between three basic systems: 21EPA (high-quality finishes, high performance), HVLP (maximum savings & minimal overspray) and Conventional via the 25 / 36 / 28 air caps for heavier material applications and special effects. The recommendations for each nozzle size range from paints/stains and finishes to HS primers, high-viscosity primers and water-based systems.
| Variant / Designation | Model | Manufacturer’s No. | Suitable for |
|---|---|---|---|
| 21EPA Air Cap & 1.40 mm | 21 EPA – High-quality finishes | 10141620 | For high-quality finishes (e.g. lacquers and stains/dyes) where surface quality is a priority. |
| 21EPA Air Cap & 1.60 mm | 21 EPA – Finishes and Primers | 10141623 | For finishes and primers, suitable for paints & clear coats, wood and HS primers in a controlled build-up. |
| 21EPA Air Cap & 1.80 mm | 21 EPA – HS Primer / high thickness | 10141625 | For HS primers, higher film thicknesses and base coats/primers where material build-up and filling capacity are required. |
| Conventional air cap 25 & 2.00 mm | 25 – HS Primer / high thickness | 10141627 | For HS primers and high material application (high film thickness), ideal for building up a thick coat in a short time. |
| Conventional air cap 36 & 2.50 mm | 36 – Primers / high viscosity | 10141629 | For high-viscosity primers; also suitable for clear coats and water-based paints when high flow rate is required. |
| Conventional air cap 28 & 2.80 mm | 28 – Viscous primers / Forged effect | 10141630 | For very viscous primers and applications with a forged effect (textured finish), where maximum flow rate is crucial. |
| HVLP air cap & 1.40 mm | HVLP – Industrial finishes / Dyes | 10141621 | For industrial finishes and stains/dyes – where maximum savings with minimal overspray are required. |
| HVLP air cap & 1.60 mm | HVLP – Industrial finishes and primers | 10141624 | For industrial finishes and primers, including HS primers, where a balanced mix of surface finish and build-up is required. |
| HVLP air cap & 1.80 mm | HVLP – HS primer / high thickness | 10141626 | For HS primers, high film thicknesses and base coats/primers – ideal when higher throughput is required but HVLP benefits must be retained. |
| HVLP air cap & 2.50 mm | HVLP – Primers / high viscosity | 10141631 | For high-viscosity primers as well as clear coats and water-based paints, where high material flow with HVLP spraying performance is required. |
Accessories/Variants: The right consumables and accessories are crucial for a stable process. Depending on the application, the Classic Pro XD can be supplemented with suitable nozzle + needle kits, air caps as spare parts, and an RC2 air flow regulator with pressure gauge. Additionally, cup/filter solutions are recommended for a clean material supply.
Nozzle sets (nozzle + needle) – selection guide
The Classic Pro XD works with matched nozzle + needle kits. The nozzle size directly influences material throughput, film build-up and suitability for thin or thick materials. The larger the nozzle, the higher the throughput – ideal for primers/high-viscosity products. Smaller nozzles support fine finishes.
- 1.40 mm: high-quality finishes (paints, stains/dyes)
- 1.60 mm: finishes & primers (paints/clear coats, wood, HS primers)
- 1.80 mm: HS primers / high film thicknesses (base coats, primers)
- 2.00–2.80 mm: thicker/high-viscosity primers and special effects (forged effect), depending on the air cap
If you tell me the material type (finish/primer/high-viscosity/water-based) and the desired film thickness, I can recommend the right combination of air cap and nozzle size.
Tip: HVLP is ideal for maximum savings and minimal overspray. 21EPA is the right choice if you prioritise high-quality, high-performance finishes. For thicker/high-viscosity primers and special effects, the conventional 25/36/28 air caps with larger nozzle sizes are intended.
Intended use / Applications
The Classic Pro XD is a universal professional solution that covers a wide range of materials and industries depending on the air cap and nozzle. The decisive factor is the combination of spray system (finish/cost-saving/conventional) and material throughput (nozzle size).
- Bodyshop: Primers and sprayable mastics/fillers
- Industry: Finishes and primers in production and workshop applications
- Wood: Varnishes and clear coats, base coats, water-based clear coats
- Decoration: Enamels and clear coats
In practical terms, this means: with 1.40–1.60 mm, you cover many finish and standard priming tasks; with 1.80 mm, you move more into HS primers/layer build-up; and with 2.00–2.80 mm, you address high-viscosity primers and special effects – in each case in combination with the appropriate air cap.
Product flyer
Further details on the SAGOLA Classic Pro XD (technical specifications, air caps, versions/order codes, spare parts, accessories & warranty) can be found in the manufacturer’s documentation (brochure). To the Classic Pro XD brochure (PDF)
- Product number: SW10075.1
- Manufacturer: Elcometer
- Weight: 1 kg
- Length: 243 mm
- Width: 135 mm
- Height: 143 mm
Technical details
| Weight with cup | 481 g |
| Dimensions | 17.9 × 1.9 × 17.6 cm |
| Air inlet | 1/4 |
| Cup capacity | 650 ml |
| Product filter | 80 mesh |
| Max. recommended inlet pressure | 2 bar |
| Spray distance (HVLP) | 12–15 cm |
| Spray distance (EPA / 25 / 36 / 28) | 18–20 cm |
| Air consumption HVLP | 355 L/min |
| Air consumption 21 EPA | 225 L/min |
| Air consumption 25 / 36 / 28 | 155 / 205 / 240 L/min |
Register
