DeVilbiss AG362 Air Cap & Retaining Ring HV30 HVLP – 0.7 bar atomisation pressure
€155.30*
% €207.06* (25% saved)Fast Shipping
Scope of delivery
DeVilbiss AG362 – Air caps & air caps with retaining ring
Title and description
The DeVilbiss AG362 is an automatic compressed air spray gun for industrial applications. It has a modular design, operates at low pressure and can be equipped with either a lever or screw manifold. The air caps in the C1–C3 (conventional), TE10–TE50 (Trans-Tech) and HV30 (HVLP) series offer optimum adaptation to different atomisation requirements.
Highlights & advantages / Areas of application
- Modular design – easy adaptation between lever and screw distributors.
- Choice between conventional, Trans-Tech and HVLP atomisation systems.
- High transfer efficiency (over 65% according to PG6/EPA specifications).
- Suitable for water-based and solvent-based materials.
- Use in paint shops, mechanical engineering, plastics finishing and series coating.
Technical data
- Max. air inlet pressure: 7 bar (102 psi)
- Cylinder air pressure: 4–7 bar
- Material: stainless steel air cap, QuickClean™-coated aluminium housing
- Recommended spray distance: 150–200 mm
- Ambient temperature: up to 40 °C
- Weight: approx. 940 g (lever distributor) / 850 g (screw distributor)
Versions & part numbers
| Item number | Designation | Atomisation type |
|---|---|---|
| PROC-120-C1-K | Air cap C1 Conventional | Conventional |
| PROC-120-C2-K | Air cap C2 Conventional | Conventional |
| PROC-120-C3-K | Air cap C3 Conventional | Conventional |
| PRO-100-HV30-K | Air cap & retaining ring HV30 HVLP | HVLP |
| PRO-100-TE10-K | Air cap & retaining ring TE10 Trans-Tech | Trans-Tech |
| PRO-100-TE20-K | Air cap & retaining ring TE20 Trans-Tech | Trans-Tech |
| PRO-100-TE30-K | Air cap & retaining ring TE30 Trans-Tech | Trans-Tech |
| PRO-100-TE40-K | Air cap & retaining ring TE40 Trans-Tech | Trans-Tech |
| PRO-100-TE50-K | Air cap & retaining ring TE50 Trans-Tech | Trans-Tech |
Compatible accessories (selection)
- End cap for fixed needle guide (SPA-167-K)
- Micrometer assembly for needle adjustment (SPA-417-K)
- Detent assembly for needle adjustment (SPA-426-K)
- Sealing plug for atomisation & spray pattern (SPA-111-K2)
Why choose the DeVilbiss AG362?
The AG362 combines industrial reliability with precision. Its modular design and wide range of air caps allow it to be adapted to any application, from fine finishing to high-throughput jobs.
FAQ
- Which air cap is suitable for fine surfaces?
- The TE10 air cap offers the finest spray pattern with high efficiency.
- Can I use water-based paints?
- Yes, the gun and air caps are designed for water- and solvent-based materials.
- What is the recommended spray distance?
- Between 150 and 200 mm, depending on the material and pressure.
DeVilbiss AG362 & GTi PRO – Nozzles and fluid tips
Title and description
The stainless steel and nitride-hardened nozzles in the PROC-215 and PRO-205 series ensure an even material flow with minimal turbulence. They are precisely matched to the AG362 and GTi PRO spray guns and offer reproducible atomisation results across a wide size range from 0.85 mm to 2.2 mm.
Highlights & advantages / Areas of application
- High wear resistance thanks to nitride-hardened variants for abrasive materials.
- Optimised nozzle channels for uniform flow rates (150–400 ml/min depending on air cap).
- Stainless steel variant suitable for standard and water-based paints.
- Use in automatic spraying systems, robot applications and series production.
Technical data
- Sizes: 0.85–2.2 mm
- Material: stainless steel or nitrided stainless steel
- Compatible with AG362 and GTi PRO guns
- Assembly with standard fluid tip and needle according to Table 3/4 (AG362 operating instructions)
Versions & part numbers
See complete list from PROC-215-085-K to PRO-205N-22-K (stainless steel and hardened).
Compatible accessories (selection)
- AG362 fluid needle sets (PROC-215N series)
- Fluid filters and check valves
- Adapters for lever and screw manifolds
Why DeVilbiss nozzles?
Precision manufacturing guarantees consistent layer thicknesses and the finest atomisation. Combinations of stainless steel and hardened tips extend service life and ensure high process stability.
FAQ
- Which nozzle is suitable for viscous materials?
- Nozzles with a diameter of 1.8 mm or more (e.g. PRO-205-18-K or PROC-215-18-K) are ideal for highly viscous materials.
- Are the nozzles interchangeable between AG362 and GTi PRO?
- Yes, the size series and threads are compatible.
- When should a hardened nozzle be used?
- For abrasive, highly pigmented or filler-rich materials to minimise wear.
Binks AG361 – Paint needles (stainless steel & hardened)
Title and description
The SPA-361 series paint needles are designed for use with the Binks AG361 automatic spray gun. They control the material flow precisely and are available in stainless steel and hardened versions to match the respective nozzles (0.85 – 2.2 mm).
Highlights & advantages / Areas of application
- High precision fit for AG361 automatic spray guns.
- Stainless steel: corrosion-resistant and ideal for standard paints.
- Hardened version: increases service life with abrasive media.
- Suitable for Trans-Tech, HVLP and conventional AG361 variants.
Technical data
- Size ranges: 0.85–1.0 mm / 1.2–1.4 mm / 1.6–1.8 mm / 2.0–2.2 mm
- Material: stainless steel or hardened steel (nitrided)
- Can be combined with corresponding nozzles PRO-205-… and PROC-215-…
- Optimal sealing and precise return spring for constant flow
Versions & part numbers
| Item number | Size range (mm) | Material |
|---|---|---|
| SPA-361-085-10-K | 0.85–1.0 | Stainless steel |
| SPA-361N-085-10-K | 0.85–1.0 | Hardened |
| SPA-361-12-14-K | 1.2–1.4 | stainless steel |
| SPA-361N-12-14-K | 1.2–1.4 | Hardened |
| SPA-361-16-18-K | 1.6–1.8 | stainless steel |
| SPA-361N-16-18-K | 1.6–1.8 | Hardened |
| SPA-361-20-22-K | 2.0–2.2 | stainless steel |
| SPA-361N-20-22-K | 2.0–2.2 | Hardened |
Compatible accessories (selection)
- Binks AG361 air caps (PROC-120-… / PRO-100-… series)
- AG361 nozzles made of stainless steel and hardened steel
- End caps, manifolds, return systems (SPA-173-K – SPA-176-K)
Why choose Binks AG361 paint needles?
Binks stands for precision in industrial automation. AG361 paint needles combine the highest manufacturing quality with durable materials – ideal for consistent coating processes and precise control of material quantity.
FAQ
- Can I mix stainless steel and hardened needles?
- It is recommended to always combine needles and nozzles of the same material type to ensure sealing and durability.
- How often should paint needles be replaced?
- Depending on the abrasiveness of the material and the duration of use – check regularly for wear.
- Which needle fits a 1.4 mm nozzle?
- The combination SPA-361-12-14-K (stainless steel) or SPA-361N-12-14-K (hardened) is intended for this purpose.
- Product number: 2180259
- Manufacturer: DeVilbiss
- EAN: 5,02185E+12
- Weight: 0.079 kg
Further manufacturer information
Register
