IniFlex colour stack, 18 circulation valves, quick socket connection

Flushing a system between colour changes can waste time, material and money. That's why this IniFlex colour change valve assembly is designed to flush clean - without a lot of solvent. IniFlex fits into almost any automated industrial application where compact colour change valves are required. For direct connection to your dispensing system, use the quick socket connection and the appropriate fittings. IniFlex colour change valves are designed, manufactured, assembled and factory tested in the USA.

€12,202.74* €15,253.42* (20% saved) €10,254.40*

Price excl. VAT

IniFlex Color Stack, 18 non-circulation valves, Quick-Socket connection

Whether you are setting up a new automated surface treatment system or upgrading an existing installation, IniFlex allows different needs and budgets to be met more flexibly than ever before. IniFlex fits almost any automated industrial application requiring compact colour change valves. Use the quick-socket connector and appropriate fittings for direct connection to your dispensing system. The colour change valve assembly flushes cleanly with no fluid dead spots, minimising purge times and solvent use. IniFlex colour change valves are designed, manufactured, assembled and factory tested in the USA.

€10,257.80* €12,822.25* (20% saved) €8,620.00*

Price excl. VAT

XTR7+ gun, hose and nozzle set, 8-pack 26C963 with display stand

Do you have multiple spray systems that can't be allowed to fail for any reason? Bundle, replace and save with this 8-piece Graco XTR7+ gun, hose and nozzle set. The XTR7+'s new self-locking needle assembly can be disassembled for cleaning or rebuilding without the need for cumbersome tools. The look of the XTR7+ mirrors the included Xtreme Duty hose and offers the reassurance that the hose is rated for a maximum working pressure of 7250 psi up to the tip. Combine all this with multiple Graco XHD RAC nozzles and you're ready to spray the most challenging materials. Protective coating solution in a box - saves time and money. Save time and money when replacing wetted components Self-locking needle design for faster gun changeover XTR7+ Permissible material pressure 50 MPa (500 bar, 7250 psi) Xtreme Duty hoses included: 3/8" x 15 m (50 ft), 1/4" x 1.8 m (6 ft) Multiple XHD RAC nozzles included

€10,068.47* €11,845.26* (15% saved) €8,460.90*

Price excl. VAT

XTR7+ gun, hose and nozzle set, 8-pack 273143 with display stand

€10,068.47* €11,845.26* (15% saved) €8,460.90*

Price excl. VAT

XTR5+ gun, hose and nozzle set, 8-pack 26C962 with display stand

Do you have multiple spray systems that can't afford to fail for any reason? Bundle, replace and save with this 8-pack of Graco XTR5+ gun, hose and nozzle kit. The XTR5+'s new self-sealing needle assembly can be disassembled for cleaning or retrofitting without the need for cumbersome tools. The XTR5+'s look matches the included Xtreme Duty hose, providing peace of mind that the hose is rated to the maximum working pressure of 5000 psi, right to the tip. Pair that with several Graco XHD RAC nozzles and you're ready to spray the most demanding materials. Solution for protective coatings in a box – saves time and money. Save time and money on wetted component replacement Self-locking needle design for faster gun conversions XTR5+ Maximum fluid pressure 34.5 MPa (345 bar, 5000 psi) Includes Xtreme Duty hoses: 3/8" x 15 m (50 ft), 1/4" x 1.8 m (6 ft) Multiple XHD RAC nozzles included

€8,233.61* €9,686.60* (15% saved) €6,919.00*

Price excl. VAT

XTR5+ gun, hose and nozzle set, 8-pack 273142 with display stand

Do you have multiple spray systems that can't be allowed to fail for any reason? Bundle, replace and save with this 8-pack of Graco XTR5+ gun, hose and nozzle kits. The XTR5+'s new self-locking needle assembly can be disassembled for cleaning or rebuilding without the need for cumbersome tools. The look of the XTR5+ mirrors the included Xtreme Duty hose and offers the reassurance that the hose is rated for a maximum working pressure of 5000 psi up to the tip. Combine all this with multiple Graco XHD RAC nozzles and you're ready to spray the most challenging materials. Protective coating solution in a box - saves time and money. Save time and money when replacing wetted components Self-locking needle design for faster gun changeover XTR5+ Permissible material pressure 34.5 MPa (345 bar, 5000 psi) Includes Xtreme Duty hoses: 3/8" x 15 m (50 ft), 1/4" x 1.8 m (6 ft) Multiple XHD RAC nozzles included

€8,233.61* €9,686.60* (15% saved) €6,919.00*

Price excl. VAT

IniFlex automatic gun, variants with 4 circulation valves

If you want to speed up colour change times, the material must be mixed closer to the spray point. For this reason, you can place IniFlex colour change valves close to most spraying equipment. IniFlex fits into almost any automated industrial application where compact colour change valves are required. The colour change valve assembly flushes cleanly without material dead spots, minimising flushing times and solvent consumption. IniFlex colour change valves are designed, manufactured, assembled and factory tested in the USA.

€7,992.04* €9,990.05* (20% saved) €6,716.00*

Price excl. VAT

IniFlex automatic gun, variants with 2 circulation valves and 2 non-circulation valves

€7,774.03* €9,717.54* (20% saved) €6,532.80*

Price excl. VAT

IniFlex automatic gun, variants with 4 non-circulation valves

€7,562.69* €9,453.36* (20% saved) €6,355.20*

Price excl. VAT

IniFlex dosing/mixing distributor, drain B-side

Whether you are setting up a new automated surface treatment system or upgrading an existing installation, IniFlex can fulfil different requirements and budgets more flexibly than ever before. IniFlex fits into almost any automated industrial application where compact colour change valves are required. The multi-component dosing/mixing distributor has a compact design with a small volume. The innovative design of the static mixer minimises space requirements.

€7,555.07* €9,443.84* (20% saved) €6,348.80*

Price excl. VAT

Automatic fusion gun with solvent flushing

Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP gun can handle it all. The robust design offers you excellent mixing and material properties for the best results on site. For high flow rates when spraying polyurethane foam and polyurea applications. Fusion gun with mechanical cleaning (MP) - Developed for excellent mixing behaviourSuitable for thin film applications with very low output through to large applications with high flow rates and output by simply changing the mixing module and nozzleEasy mechanical cleaning - mixing modules and nozzles are cleaned with a drillSmoother finish and better atomisationOffers more powerful functions than all other guns with mechanical cleaning combinedDurable mixing modules provide excellent mixing behaviourThe improved mixing module and nozzle design provides excellent mixing behaviour and materialexcellent material properties and significantly reduces repair and maintenance costs CeramTipDurable and easy to changeRound and flat spray pattern PolyCarballoy mixing module with adjustable front packingFor a proven long service life PolyCarballoy mixing module with adjustable front packingFor a proven long service life Contoured trigger Simple two-finger operation Ergonomic gripThe ergonomic handle increases operator comfort and reduces painter fatigue. Flushing piston rodEasy to adjust, one-piece rod for longer life Safety stopManual on/off

€6,032.59* €7,097.16* (15% saved) €5,069.40*

Price excl. VAT

Gun cistern set for all ProMix dosing devices

Automatic flushing system for manual spray guns with dosing systems to prevent operating errors, reduce labour and contain the flushing flow Automated flushing system for manual spray guns Eliminates manual gun operation for more accurate flushing and refilling - and less waste Adapters available for Pro Xp, AirPro and G15/G40 guns, sold separately

€5,868.72* €6,904.38* (15% saved) €4,931.70*

Price excl. VAT

Fusion gun with mechanical cleaning and direct injection with round spray pattern with 1.0 mm (0.040") ceramic nozzle and 0.9 mm (0.035") counterflow opening

Whether you are spraying polyurea coatings or spray foam insulation, the Fusion MP gun can handle it all. The robust design offers you excellent mixing and material properties for optimal results on the job site. For high-volume spray applications of polyurethane foam and polyurea applications. Easy mechanical cleaning - mixing modules and nozzles are cleaned with a drill Long-lasting PolyCarballoy mix module Extended mix module and nozzle provide superior mixing capabilities