100 L professional pressure blasting machine – for construction sites, workshops and industry The portable pressure blasting machine with a 100-litre capacity and 508 mm (20") boiler diameter is ideal for extensive blasting work in industry, construction and maintenance. Robust construction, high safety standards and flexible equipment options make this machine a reliable solution for every professional. Technical highlights Volume: 100 litres / 3.53 cu ft Tank diameter: 508 mm (20") Maximum pressure (standard version): 12 bar (174 psi) Maximum pressure (high-pressure version): 15 bar (217 psi) Test pressure: up to 25.8 bar (375 psi) Wall thickness: 6.3 mm CE & UKCA certified (PED 2014/68/EU) With high-performance water separator & dead man's remote control Model overview & variants Model Working pressure Dosing valve Recommended use Contractor Basic 12 bar Manual general valve Cost-effective standard applications Performance Kit 1 12 bar Manual general valve Workshop & repair work Performance Kit 1 Auto 12 bar Automatic general valve For consistent media supply during continuous operation Performance Kit 2 12 bar Manual general valve Extended features, versatile application Performance Kit 2 Auto 12 bar Automatic general valve For continuous operation & industrial requirements Performance HP Kit 1 15 bar Manual general valve High-pressure applications, e.g. for shipbuilding & concrete restoration Performance HP Kit 2 Auto 15 bar Automatic general valve Maximum performance for continuous applications Typical areas of application Concrete renovation & facade cleaning Heavy metal processing & rust removal Industrial plant cleaning Shipbuilding & offshore use Preparation of coatings & paintwork Special advantages Extra large volume for long working intervals Optionally available with standard or high-pressure equipment Pre-assembled and ready for immediate use Robust design – ideal for daily professional use Compatible with extensive accessories and safety label kit

285 L high-performance sandblasting machine for maximum efficiency in industry and shipbuilding This mobile pressure blasting machine with a 285-litre tank capacity (610 mm diameter, 10.06 cu ft) is ideal for extremely demanding industrial sandblasting work. With a working pressure of up to 15 bar, it is one of the largest and most powerful models for continuous and large-area applications. Available in various kits with standard or automatic metering valves – each perfectly tailored to your needs. Technical highlights Abrasive volume: 285 litres / 10.06 cu ft Tank diameter: 610 mm (24") Max. working pressure (standard): 12 bar (174 psi) Max. working pressure (HP version): 15 bar (217 psi) Test pressure: 25.8 bar (375 psi) Material: 6.3 mm steel wall, coated inside & outside RCV4000+ remote control with dead man's switch CE & UKCA certified according to PED 2014/68/EU Model variants in comparison Model Working pressure Dosing valve Special Kit 1 12 bar Manual standard valve Basic kit for professional use Kit 1 Auto 12 bar Automatic standard valve Uniform abrasive flow HP Kit 1 15 bar Manual standard valve High-pressure version for extreme applications Kit 2 12 bar Manual standard valve Extended equipment & accessories Kit 2 Auto 12 bar Automatic standard valve For long operating cycles with precise dosing HP Kit 2 15 bar Manual standard valve Maximum performance with extensions HP Kit 2 Auto 15 bar Automatic standard valve Continuous operation under high pressure – reliable Advantages at a glance Extremely large abrasive volume – ideal for continuous use Water separator, screen cover & label kit as standard Designed for maximum energy efficiency and safety Portable design for construction sites and factory floors Robust coating for long service life Areas of application Large-scale rust removal work (e.g. in shipyards) Concrete roughening & coating removal Industrial plant cleaning and maintenance Heavy machinery, pipeline & tank cleaning PDF data sheet Official technical details can be found in the 24285 PDF data sheet.

200 L high-performance pressure blasting machine for large-scale industrial applications This 200 L pressure blasting machine with a 610 mm (24") pressure vessel has been specially developed for large-volume blasting work in industry, shipbuilding and construction. Whether as a basic kit or in a high-pressure configuration, it offers maximum performance, long service life and high efficiency. Technical data at a glance Volume: 200 litres / 7.06 cu ft Tank diameter: 610 mm (24") Max. working pressure (standard): 12 bar (174 psi) Max. working pressure (high-pressure version): 15 bar (217 psi) Test pressure: up to 25.8 bar (375 psi) Steel wall: 6.3 mm thickness Water separator & remote control as standard CE & UKCA certified (according to PED 2014/68/EU) Available variants & equipment Model Working pressure Dosing valve Recommended use Contractor Basic 12 bar Manual general valve Standard blasting work, easy to maintain Performance Kit 1 12 bar Manual general valve High performance for medium use Performance Kit 1 Auto 12 bar Automatic general valve Uniform material flow during continuous operation Performance Kit 2 12 bar Manual general valve More accessories & modular expansion Performance Kit 2 Auto 12 bar Automatic general valve Ideal for continuous industrial processes Performance HP Kit 1 15 bar Manual general valve For high-pressure tasks, e.g. on ships or concrete Performance HP Kit 2 Auto 15 bar Automatic general valve Maximum efficiency under the toughest conditions Areas of application Ship and offshore cleaning Concrete and bridge renovation Rust removal from large steel surfaces Blasting prior to painting Large-scale projects in refineries, petrochemical plants and power stations Special features Extra large abrasive volume – ideal for long operations Expandable equipment options and kits Includes water separator, screen cover, safety labels Portable and suitable for mobile use Optimised for maximum media control & durability PDF data sheet Here is the official data sheet (PDF) for a technical overview and equipment details.

Professional 40 L pressure washer – for construction, maintenance and industry The 40-litre pressure blasting machine (14") with a boiler diameter of 355 mm offers reliable blasting technology for medium to intensive use. The design meets the highest safety standards and is designed for both mobile and stationary applications in industry, construction and metalworking. The well thought-out arrangement of the components enables efficient blasting with minimal material loss. Technical features Blast pot volume: 40 litres / 1.41 cu ft Blast pot diameter: 355 mm (14") Max. operating pressure: 12 bar (174 psi) Test pressure: 20.6 bar (300 psi) Wall thickness: 6.3 mm – high-strength steel construction Weight: approx. 74–79 kg (depending on model) Dead man's switch system with safety valve RCV remote control system with integrated air distributor CE and UKCA certified according to PED 2014/68/EU 2K coating inside/outside for maximum corrosion protection Available versions at a glance Model Dosing valve Suitability Special Contractor version Manual general valve Construction sites, mobile applications Robust basic equipment, easy to maintain Performance Kit 1 Manual general valve Industry, workshops Includes water separator, filter, cover, hose set Performance Kit 2 Automatic General Valve Continuous operation, precise media control Ideal for repeatable blasting applications Typical applications Rust removal from steel beams and metal surfaces Concrete processing and building renovation Removal of old coatings & paints Preparation for protective coatings Industrial cleaning and renovation work Safety kit A safety label kit is available as an option for models 1020/1040 with compliant labelling in accordance with current EU requirements. Ideal for replacement or retrofitting. Special Low material losses thanks to precise dosing Maximum safety thanks to CE/UKCA certification & dead man's switch Optimal ergonomics thanks to central control and colour coding Modular expansion with additional accessories (e.g. moisture jet modules)

Elcometer 1020 – Mobile blasting unit for professional spot blasting The Elcometer 1020 is a compact, portable pressure blasting unit designed specifically for touch-up, spot blasting and smaller industrial sandblasting jobs. With a capacity of 20 litres (0.70 cu ft), a maximum working pressure of 12 bar and its , the Elcometer 1020 offers a powerful solution for precise and efficient blasting applications. Key features of the Elcometer 1020 Volume: 20 litres / 0.70 cu ft Max. working pressure: 12 bar (174 psi) Pipe diameter: 38 mm (1½ inches) for optimum air flow Tank diameter: 254 mm (10 inches) Unit height: 880 mm Compact design for confined spaces and workshops High-performance water separator integrated as standard RCV4000+ remote control valve with dead man's switch CE & UKCA certified according to PED 2014/68EU Corrosion protection thanks to 2K coating and 6 mm steel wall Manufactured in the United Kingdom Typical applications Selective blasting of weld seams Rust removal from small metal components Repair blasting work in the field Post-processing in production lines Surface preparation in machine and plant engineering Differences between the versions: Kit 1 vs. Kit 2 The Elcometer 1020 is available in two versions, which differ mainly in the type of abrasive dosing. Both kits contain the basic unit, hose packages and accessories, but differ in the type of dosing valve: Feature Kit 1 (M1020-MGV1-B) Kit 2 (M1020-MGV2-B) Dosing valve Manual GV dosing valve Automatic AGV dosing valve Mixing system Mixer with T-piece, manually adjustable Mixer with T-piece, uniform dosing Remote RCV4000+ with air distributor & dead man's switch Identical Spray hose & control lines 10 m colour-coded hose (yellow/green/red) Identical Water separator Included Included Screen & cover Included Included Recommended use Flexible working, frequent changes Uniform media flow during continuous operation Why Elcometer 1020? Thanks to its compact size, ease of use and high-quality workmanship, the Elcometer 1020 is an ideal blasting device for workshops, industrial maintenance, metal construction, the automotive industry and mobile use. Its high energy efficiency, precise media control and long service life make it a top product in the field of pressure blasting technology. SEO keywords (application relevance): mobile sandblasting machine, spot blasting machine, blasting machine with water separator, industrial pressure blasting machine, blasting technology for metal, small sandblasting machine, pressure blasting post-processing, professional sandblasting machine, buy Elcometer 1020, mobile blasting system, sandblasting device with dead man's switch, sandblasting workshop, blasting system with 20 litre volume, CE-compliant blasting device, AGV blasting agent valve

60 L high-performance pressure blasting machine – For industry, construction and repair blasting work The 60-litre pressure blasting machine (14") with a tank diameter of 355.6 mm and a capacity of 2.11 cu ft has been developed for professional surface treatment applications. Whether on construction sites, in workshops or for industrial maintenance tasks, this blasting machine offers maximum efficiency, robust workmanship and the highest safety standards. Technical features Capacity: 60 litres / 2.11 cu ft Tank diameter: 355.6 mm (14") Max. operating pressure: 12 bar (174 psi) Test pressure: 20.6 bar (300 psi) Wall thickness: 6.3 mm Dead man's switch remote control system with integrated air distributor Standard high-performance water separator CE and UKCA certified according to PED 2014/68/EU Jet hose connection: 1¼" BSP Weight: approx. 90–95 kg (depending on model) Model overview Model Dosing valve Recommended application Features Performance Kit 1 Manual general valve Workshops, mobile maintenance Easy to use, ideal for changing applications Performance Kit 2 Automatic General Valve Continuous operation, consistent media flow For maximum efficiency in series applications Typical areas of application Industrial cleaning & maintenance Metal construction & surface derusting Concrete renovation and building preparation Preparation for coating and painting Safety options A safety label kit is available for models 1460, 20100 and 24200 to ensure compliance with all legal requirements – ideal for replacement or new installations. Special advantages Large volume for longer working intervals without refilling Modular design – expandable with wet jet sets and accessories Robust construction – made in the UK Pre-assembled and delivered ready for use