Nozzle set SATAjet X 5500 RP 1.2 O
€232.03*
% €327.73* (29.2% saved)Express processing: Shipping within 24 hours
SATAjet®X 5500 I-nozzle nozzle set
The nozzle system is designed to be simple and easy to understand: the two proven technologies – namely HVLP and RP – remain. For each, there are "I" and "O" nozzle sets. With increasing nozzle size in the respective technology (HVLP/RP) and spray pattern ("I" or "O"), the material ejection also increases constantly – this means that the respective spray height and width remain the same over the entire spectrum. This provides the user with a transparent and logical system that offers clear and structured decision-making options.
The "I" nozzles have an elongated spray pattern with a short run-out zone and a drier spray core, which is ideal for lower application speeds and offers maximum control when painting. The layer thickness per spray pass is slightly lower for the same nozzle size compared to an "O" nozzle.
- Stretched fan shape with little run-out zone
- Improved control during application
- Reduced layer application per spray pass compared to the previous or "O" nozzle
The "O" nozzles have an oval spray pattern with a larger run-out zone and a wet spray core, which is suitable for higher application speeds but offers slightly less control when painting. The layer thickness per spray pass is slightly higher with the same nozzle size compared to an "I" nozzle.
- Oval fan shape with larger run-out zone
- Wet spray core for a higher working speed
- Slightly higher layer application per spray pass than with the "I" nozzle
- Product number: 1010153
- Manufacturer: SATA
- EAN: 4027533238119
- Weight: 0.142 kg
- Length: 125 mm
- Width: 60 mm
- Height: 35 mm
Further manufacturer information
| SAL-Check: | www.sata.com/sal |
| Garantieanmeldung: | www.sata.com/garantieanmeldung |
| Lackdatenblätter: | www.sata.com/lackdaten |
Weitere SATA Produkte:hier
Mehr Informationen
- Luftbedarf: 290 Nl/min
- Max. Luft - Eingangsdruck: 10,0 bar
- Düsengröße: 1,2
- Düsentechnologie: RP
- Düsenvariante: Standard
- Strahlform: O
- Max. Lagertemperatur: +60 °C
- Min. Lagertemperatur: -20 °C
- Empfohlener Luft - Eingangsfließdruck (compliant / HVLP): 2,0 bar
- Empfohlener Lackierabstand: 17 - 21 cm
- Artikelnummer: 1063586
- Baureihe: jet X 5500
- Artikelname: Düsensatz SATAjet X 5500 RP 1,2 O
- SATA Loyalty Program coins & more: 100 SATA coins
- Gewicht netto: 0 kg
Register
