XP35 complete sprayer for non-hazardous areas, 4:1 mixing ratio, 240 V
Price on request
Ready for shipping in 5-8 Werktage
Two-component spraying – simple and affordable. Graco XP plural-component sprayers have been designed to pump, mix and atomise high-viscosity and high-solids coatings with excellent results. If you switch from manual mixing, you will quickly see that the XP offers an excellent return on investment by reducing material waste and the amount of solvent used for cleaning. Optimised for low-pressure airless spray applications, the Graco XP35 has a similar flow capacity to the XP70 but with a smaller NXT 3400 air motor. The XP35 is an ideal replacement for Graco's Bulldog Hydra-Cat systems.
For low-pressure protective coating applications
- Reduces material waste
- No discarding of unused mixed material at the end of the day
- Saves money on cleaning because less solvent is used
- Consistent material quality – no guesswork or human error in measuring materials
- Easy to use – minimal training required
- Reduces maintenance costs
- Rated at 50 MPa (500 bar, 7250 psi) to handle viscous materials and long lengths of tubing
| Air inlet size (inches): | 3/4 |
|---|---|
| Air inlet thread type: | NPSM |
| Applicator type: | Airless automatic, airless hand system |
| Compatible material: | Protective coatings, primer, epoxy resin, polyurethane, two-component coating, solvent |
| Component type: | multi-component |
| Configuration: | Chassis assembly with 26.5 liter material container |
| Gender of the air inlet thread: | Internal thread |
| Gender of the material inlet thread: | External thread |
| Gender of the material outlet thread: | Internal thread |
| Hose length (m): | 10.7 |
| Includes: | heaters, solvent flush pump, container) |
| Material application.: | Beschichtungen, Lacke, Farben |
| Material inlet thread type: | NPSM |
| Material outlet thread type: | NPT |
| Maximum air inlet pressure (MPa): | 1.21 |
| Maximum air supply pressure (bar): | 12.07 |
| Maximum air supply pressure (kPa): | 1207 |
| Maximum delivery rate (L/min): | 7.2 |
| Maximum flow rate (cm³/min): | 7200 |
| Maximum hose length (m): | 91.4 |
| Maximum inlet air pressure (psi): | 175 |
| Maximum material temperature (°C): | 71 |
| Maximum material viscosity (cP): | 20000 |
| Maximum number of cycles (DH/min): | 40 |
| Maximum operating pressure (MPa): | 24 |
| Maximum operating pressure (kPa): | 24100 |
| Maximum operating pressure (psi): | 3500 |
| Maximum operating temperature (°C): | 54 |
| Maximum spray pressure (MPa): | 24.1 |
| Maximum spray pressure (bar): | 241 |
| Maximum spray pressure (kPa): | 24100 |
| Maximum spray pressure (psi): | 3500 |
| Measurement type: | Fixed mechanical positive displacement |
| Minimum material viscosity (cP): | 200 |
| Mixing accuracy (%): | +/- 5 |
| Mixing ratio: | 4:1 |
| Noise pressure level, (dB(A)): | 86 |
| Number of containers: | 2 |
| Number of hardeners: | 1 |
| Number of reducers: | 0 |
| Number of resin colours: | 1 |
| Permissible operating pressure (bar): | 241 |
| Product type: | multi-component |
| Series: | XP35 |
| Sink type: | solvent |
| Size of the material inlet opening (inches): | 1-1/4 |
| Size of the material outlet opening (inches): | 1/2 |
| Sound level, (dB(A)): | 98 |
| Supply voltage: | Air |
| Total depth (cm): | 132.1 |
| Total depth (mm): | 1321 |
| Total height (cm): | 157.5 |
| Total height (mm): | 1575 |
| Total width (cm): | 88.9 |
| Total width (mm): | 889 |
| Type: | Multi-component sprayer |
| Weight (kg): | 325.2 |
| Wetted material: | Electroless Nickel Plated Carbon Steel, Coated Carbon Steel, Stainless Steel, Carbide, Acetal, UHMWPE, Nylon, Solvent Resistant PTFE Plastics, Carbon Filled PTFE, Aluminum |
- Product number: 1032895
- Manufacturer: Graco
- EAN: 00755652688853
Register
