Manufacturer no.:
FA3122
SaniForce 2150 aluminium diaphragm pump with flanged connections, 316 S/S seats, PTFE O-rings, Santoprene balls & diaphragm
€8,169.89*
% €9,611.63* (15% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
Graco SaniForce 2150 air-operated double diaphragm pumps feature the industry's best, most durable, lubricant-free air valves. Excellent for applications where high flow rates and transportability are required. Graco's reliable diaphragm pumps offer a wide range of food-grade elastomers, including Santoprene, PTFE and moulded EPDM/PTFE.
SaniForce 2150 double diaphragm pump
- 63.5 mm (2-1/2") Tri-Clamp connection
- Flow rates up to 567 l/min (80 US gpm) 568 l/min (85 US gpm)
- Fluid pressure up to 84 MPa (8.4 bar, 120 psi)
- All materials that come into contact with the media are FDA-approved and meet the requirements of Section 21 of the US Code of Federal Regulations (CFR)
- High volume transfer of liquid concentrates from bulk containers or re-packaging of materials from the original container into smaller containers - up to 20,000 cps
- Suitable for pumping products such as: concentrated fruit juices, sauces, pastes, starch, wine, cooking oil, marmalade and jellies
Patented lubricant-free air valve
- Three-way control valve for non-sticking operation
- Durable 16-series stainless steel rod construction for long life and corrosion resistance
- 1040, 1590 and 2150 SaniForce pumps share common centre sections
- 100% extremely serviceable air valve
PTFE/EPDM diaphragms
- Moulded diaphragm plate with PTFE on the material side and EPDM on the air side on Graco's PTFE/EPDM diaphragms – so there is no place for bacteria
- Improved diaphragm wear and life with no exposed diaphragm plate on the fluid side
- Extended diaphragm life in abrasive applications where PTFE is still required
- Available for SaniForce 1040, 1590, 2150 and SaniForce HS 1590 and 3150
| Air inlet size (inches): | 1/2 |
|---|---|
| Air inlet thread type: | NPT |
| Application: | Hygienic applications |
| Ball material: | Santoprene |
| Compatible material: | Cooking oil, food and personal care |
| Connection type: | Tri-Clamp |
| Distributor O-ring material: | PTFE |
| Distributor configuration: | End opening |
| For use with: | Food and personal care |
| Gender of the air inlet thread: | Internal thread |
| Material: | stainless steel |
| Material in the liquid housing: | 316L stainless steel |
| Material of the centre housing: | aluminum |
| Material outlet size (cm): | 6.35 |
| Material outlet size (mm): | 63.5 |
| Maximum air pressure (MPa): | 0.8 |
| Maximum air pressure (bar): | 8 |
| Maximum air pressure (kPa): | 800 |
| Maximum air pressure (psi): | 120 |
| Maximum delivery rate (L/min): | 568 |
| Maximum material pressure (MPa): | 0.8 |
| Maximum material pressure (bar): | 8 |
| Maximum material pressure (kPa): | 800 |
| Maximum material pressure (psi): | 120 |
| Maximum number of cycles (DH/min): | 165 |
| Maximum solids size (cm): | 635 |
| Maximum solids size (mm): | 6.35 |
| Membrane, compatible material: | Santoprene |
| Membrane material: | Santoprene |
| Model: | SaniForce |
| Seat material: | 316L stainless steel |
| Series: | 2150 |
| Size of the exhaust air opening (inches): | 3/4 |
| Size of the material inlet opening (cm): | 6.35 |
| Size of the material inlet opening (inches): | 2 |
| Size of the material inlet opening (mm): | 63.5 |
| Size of the material outlet opening (inches): | 2 |
| Standards met:: | ATEX, CE, FDA compliant materials |
| Supply voltage: | Pneumatic |
| Thread of the exhaust air opening (inside/outside): | Internal thread |
| Thread of the exhaust air opening (type): | NPT |
| Transmission ratio of the pump: | 1:1 |
| Type: | Pneumatic diaphragm pump |
More information
- Product number: 1036780
- Manufacturer: Graco
- EAN: 00633955641655
- Weight: 75.749 kg
- Length: 600 mm
- Width: 700 mm
- Height: 1200 mm
Reviews
Register
