Manufacturer no.:
17E661
Mark V HD ProContractor Series Electric airless sprayer, 230V, Multi
€12,300.44*
% €13,667.15* (10% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
The Mark V HD offers a higher flow rate to complete jobs faster. This unit offers 20% higher productivity compared to the Mark IV and features an improved high performance plastering gun that can accommodate a larger nozzle size to handle all textured finishes as well as the wide range of primers and paints.
Work smarter, get more jobs done The Mark HD ProContractor range of electric airless texture sprayers is designed for speed and performance, so you can get to the next job faster and increase your profits.
- Endurance Vortex MaxLife piston pump
- Outstanding pump life
- Pioneering Vortex torsion bar technology
- Lasts 6x longer after each replacement thanks to innovative MaxLife technology
- Oversized passages for high-speed flow to rotate the piston for even wear Longest-lasting seals and piston rod With durable ceramic and stainless steel balls for maximum versatility
- MaxFlo 2 with flocculation protection
- Less flocculation, higher productivity
- Self-cleaning Vibra-Seal technology prevents material build-up
- Uninterrupted spraying with effective flocculation protection for greater productivity
- Optimised diffusers for the thickest coatings
- BlueLink
application and spray gun management system- Optimise your operation
- Track every sprayer: precise location and hourly productivity
- Keep an eye on work progress: on-demand productivity data and reporting from anywhere
- Maximise uptime Set maintenance schedules, warnings and job site notes
- SmartControl 4.0 with ProGuard protection system
- Precision pressure control
- Lowest dead zone at any pressure delivers a consistent spray pattern without pressure fluctuations
- ProGuard prevents electrical damage caused by extreme power supply conditions at the point of use
- WatchDog pump protection system automatically prevents pump damage when material supply is too low
- QuikReel hose management system
- Easy hose management
- Unwind and rewind up to 300 feet (90 metres) of hose in seconds.
- No twisting, kinking or coiling
- Use only as much hose length as needed - the rest stays on the reel
- ProConnect 2 pump replacement system
- No more costly downtime
- Pump replacement within minutes
- No tools, pins or parts to lose
- FastFlush 2 system
- Now fast cleaning is even FASTER
- Clean the pump up to six times faster with half the amount of water
- Material flow at high speed due to 60% higher motor speed
- Pressure-resistant inlet screen
- Durable filtration
- Withstands harsh conditions to maintain flow through the filter
- MaxPower motor and Precision Advantage Drive
- Proven performance for all painting applications
- Brushless design with high torque and lifetime warranty
- The drive with the longest service life
- The hardened steel gears run particularly quietly and offer a lifetime guarantee.
- Additional features:
- WatchDog pump protection system
- Easy Out filter distributor
- Robust suction valve
- Durable chassis in robust design
| Compatible material: | Stains, glass, oil, varnishes, primers, fillers, acrylic paints, interior emulsion paints, exterior emulsion paints, latex, fillers, anti-corrosion paints, fireproofing paints, foam forming materials |
|---|---|
| Compatible replacement pump: | 17H833 |
| Convertible: | Not convertible |
| Double strokes per gallon: | 110 |
| Filter mesh size: | 60 |
| Frame configuration: | Hi boy |
| Frequency (Hz): | 50 |
| Hose inlet diameter (cm): | 9,525 |
| Hose inlet diameter (inch): | 3/8 |
| Hose inlet diameter (mm): | 9,525 |
| Hose reel type: | QuikReel |
| Inlet colour screen: | Heavy duty stone catcher |
| Inner diameter of material hose (inch): | 3/8 |
| Material outlet size (mm): | 9,525 |
| Material outlet thread type: | NPSM |
| Maximum delivery rate (L/min): | 4.3 |
| Maximum hose length (m): | 30 |
| Maximum nozzle size (inch): | 37 |
| Maximum nozzle size 1 gun (inch): | 37 |
| Maximum operating pressure (MPa): | 22.7 |
| Maximum operating pressure (kPa): | 22700 |
| Maximum operating pressure (kg/cm²): | 22.7 |
| Maximum operating pressure (psi): | 3300 |
| Maximum sound pressure level (dB(A)): | 82 |
| Minimum generator output (W): | 5000 |
| Minimum generator output (kW): | 0 |
| Model: | Mark HD |
| Motor size (kW): | 1.65 |
| Motor type: | Brushless, DC |
| Number of guns: | 1 |
| Outlet colour screen: | 60 mesh stainless steel sieve |
| Permissible operating overpressure (psi): | 3300 |
| Permissible operating pressure (bar): | 227 |
| Phases: | 1 |
| Pressure control type: | SmartControl 4.0 |
| Product series: | ProContractor |
| Pump mounting type: | ProConnect 2 |
| Pump rod type: | MaxLife |
| Pump sleeve material: | MaxLife |
| Pump type: | Endurance Vortex |
| Rated power (kW): | 1.65 |
| Series: | v |
| Size of the material outlet opening (inches): | 3/8 |
| Spray gun type: | HD plastering gun, blue |
| Spraying technology: | Airless |
| Supply voltage: | Electric |
| Total height (cm): | 99 |
| Total height (mm): | 9,906,000 |
| Total length (cm): | 71 |
| Total length (mm): | 711.2 |
| Total width (cm): | 61 |
| Total width (mm): | 6,096,000 |
| Type: | Airless sprayer |
| Voltage (V): | 230 |
| Volume per cycle (cycles/gal): | 110 |
| Weight (kg): | 68 |
| Wetted material: | Galvanized Carbon Steel, Nickel Plated Carbon Steel, Nylon, Stainless Steel, PTFE, Acetal, Leather, UHMWPE, Aluminum, Tungsten Carbide, PEEK, Brass |
More information
- Product number: 1035535
- Manufacturer: Graco
- EAN: 00755652817918
- Weight: 83.007 kg
- Length: 800 mm
- Width: 670 mm
- Height: 1070 mm
Reviews
Register
