Manufacturer no.:
96G222
G3™ SP Grease lubricant pump, 12 VDC, 4 litres, low level with monitoring, alarm, manual operation, CPC, 1 sensor
€2,225.30*
Ready for shipping in 5-8 Werktage
Also interesting
Product information
Longer service life, lower operating costs and higher productivity with the G3 from Graco! The G3 SP is equipped with an M12 input for operation with a proximity switch, is very easy to programme and includes one adjustable pump element as standard, plus space for two more.
- Built-in control to monitor the cycles and set the time between lubrication events
- Level control with pre-warning and shutdown.
- In manual pump operation, lubrication cycle is triggered on demand
- Password-protected settings
| Alarm relay, maximum inductive operating voltage (VDC): | 220 |
|---|---|
| Application: | On-road vehicles, off-road vehicles |
| Compatible dosing system: | Progressive system |
| Compatible material: | Fat |
| Contact power low level (W): | 10 |
| Control options: | Progressive system |
| Current load (A), low level: | 1.2 |
| Energy type: | Electric |
| For use with: | Progressive systems |
| Gender of the material outlet thread: | Internal thread |
| IP dimensioning: | IP69K |
| Includes: | Low level with monitoring |
| Inductive maximum operating current, alarm relay (A): | 1.5 |
| Inductive maximum permissible load, alarm relay: | 10 ?A;10m VDC |
| Inductive maximum rated load, alarm relay (A): | 1 |
| Inductive maximum switching capacity, alarm relay: | 25VA;30W |
| Input, maximum switch-off current (mA): | 1 |
| Input, response time (ms): | 60 |
| Input cycle rate (Hz): | 8 |
| Input impedance: | 1.1 |
| Input load current (mA at 12 VDC): | 11 |
| Low level switching capacity (VDC): | 200 |
| Material outlet size (mm): | 6,3500 |
| Material outlet thread type: | NPSF |
| Maximum NLGI grade: | No. 2 |
| Maximum filling inlet pressure (bar): | 344.7 |
| Maximum filling inlet pressure (kPa): | 34470 |
| Maximum filling inlet pressure (psi): | 5000 |
| Maximum operating pressure (MPa): | 35.1 |
| Maximum operating pressure (kPa): | 35160 |
| Maximum operating pressure (psi): | 5100 |
| Maximum rated residual voltage (V): | 2 |
| Maximum running time (min): | 30 |
| Maximum voltage (V dc): | 16 |
| Minimum voltage (V dc): | 9 |
| Model: | G3 |
| Number of machine cycle counting sensor inputs: | 1 |
| Number of pressure and cycle sensor inputs: | 3 |
| Number of pump elements: | Up to 3 |
| Number of sensor inputs: | 1 |
| Permissible operating pressure (bar): | 351.6 |
| Power connection type: | CPC |
| Relief valve, output voltage (VDC): | 12 |
| Relief valve maximum operating current (A): | 2 |
| Relief valve maximum operating power (W): | 48 |
| Required input switch type: | Normally open |
| Reservoir size (L): | 4 |
| Resistive maximum operating current, alarm relay (A): | 3 |
| Resistive maximum permissible load, alarm relay: | 10µA;10m VDC |
| Resistive maximum rated load, alarm relay (A): | 2 |
| Resistive maximum switching capacity, alarm relay: | 50VA;60W |
| Sensor input voltage (VDC): | 12 |
| Series: | SP |
| Size of the material outlet opening (inches): | 0.25 |
| Switching current (A), low level: | 0.5 |
| Total depth (cm): | 25.4 |
| Total depth (mm): | 254 |
| Total height (cm): | 36.8 |
| Total height (mm): | 368 |
| Total width (cm): | 23.5 |
| Total width (mm): | 235 |
| Type: | Electric piston pump |
| Voltage (V): | 12VDC |
| Voltage (V dc): | 12 |
| Weight (kg): | 6 |
| Wetted material: | Nylon, Trogamid T5004-060, Galvanized Steel, Mild Steel, Alloy Steel, Stainless Steel, Nitrile Rubber, Bronze, Nickel Plated Alnico, Chemically Lubricated Acetal, Aluminum, PTFE, Grillamid |
More information
- Product number: 1036267
- Manufacturer: Graco
- EAN: 00755652411383
- Weight: 7.892 kg
- Length: 390 mm
- Width: 290 mm
- Height: 290 mm
Reviews
Register
