Manufacturer no.:
96G194
G3™ Pro grease lubricator, 24 VDC, 8 litres, follower plate, low-level with monitoring, 5-pole CPC
€2,410.94*
Ready for shipping in 5-8 Werktage
Also interesting
Product information
A longer service life, lower operating costs and higher productivity with the Graco G3! The G3 Pro has a flexible design and works with progressive and single-line systems. A cost-effective pump for a wide range of markets and applications. It comes standard with one adjustable pumping element and space for two more. The ultimate in flexibility – high quality and tailored to your application.
- Built-in control to adjust the pump's run and pause times
- Low level indicator with pre-warning and shutdown.
- Push button to manually operate the pump (remote control option available).
- Password-protected settings
- Prelube function to perform an initial lubrication cycle when the machine starts up.
| Alarm relay, maximum inductive operating voltage (VDC): | 220 |
|---|---|
| Application: | On-road vehicles, off-road vehicles |
| Compatible dosing system: | Progressive system |
| Compatible material: | Fat |
| Contact power low level (W): | 10 |
| Control options: | Per |
| Current load (A), low level: | 1.2 |
| Energy type: | Electric |
| For use with: | Single-line systems, progressive systems |
| Gender of the material outlet thread: | Internal thread |
| IP dimensioning: | IP69K |
| Includes: | Follow plate, low level |
| Inductive maximum operating current, alarm relay (A): | 1.5 |
| Inductive maximum permissible load, alarm relay: | 10 ?A;10m VDC |
| Inductive maximum rated load, alarm relay (A): | 1 |
| Inductive maximum switching capacity, alarm relay: | 25VA;30W |
| Input, maximum switch-off current (mA): | 1.5 |
| Input, response time (ms): | 60 |
| Input cycle rate (Hz): | 8 |
| Input impedance: | 1.1 |
| Input load current (mA at 24 VDC): | 22 |
| Low level switching capacity (VDC): | 200 |
| Material outlet size (mm): | 6,3500 |
| Material outlet thread type: | NPSF |
| Maximum NLGI grade: | No. 2 |
| Maximum filling inlet pressure (bar): | 344.7 |
| Maximum filling inlet pressure (kPa): | 34470 |
| Maximum filling inlet pressure (psi): | 5000 |
| Maximum operating pressure (MPa): | 35.1 |
| Maximum operating pressure (kPa): | 35160 |
| Maximum operating pressure (psi): | 5100 |
| Maximum rated residual voltage (V): | 4 |
| Maximum running time (min): | 30 |
| Maximum voltage (V dc): | 32 |
| Minimum voltage (V dc): | 18 |
| Model: | G3 |
| Number of machine cycle counting sensor inputs: | 1 |
| Number of pressure and cycle sensor inputs: | 3 |
| Number of pump elements: | Up to 3 |
| Permissible operating pressure (bar): | 351.6 |
| Power connection type: | 5-wire CPC |
| Relief valve, output voltage (VDC): | 24 |
| Relief valve maximum operating current (A): | 2 |
| Relief valve maximum operating power (W): | 48 |
| Required input switch type: | Normally open |
| Reservoir size (L): | 8 |
| Resistive maximum operating current, alarm relay (A): | 3 |
| Resistive maximum permissible load, alarm relay: | 10µA;10m VDC |
| Resistive maximum rated load, alarm relay (A): | 2 |
| Resistive maximum switching capacity, alarm relay: | 50VA;60W |
| Sensor input voltage (VDC): | 24 |
| Series: | Per |
| Size of the material outlet opening (inches): | 0.25 |
| Switching current (A), low level: | 0.5 |
| Total depth (cm): | 25.4 |
| Total depth (mm): | 254 |
| Total height (cm): | 47 |
| Total height (mm): | 470 |
| Total width (cm): | 23.5 |
| Total width (mm): | 235 |
| Type: | Electric piston pump |
| Voltage (V): | 24VDC |
| Voltage (V dc): | 24 |
| Weight (kg): | 6 |
| Wetted material: | Nylon, Trogamid T5004-060, Galvanized Steel, Mild Steel, Alloy Steel, Stainless Steel, Nitrile Rubber, Bronze, Nickel Plated Alnico, Chemically Lubricated Acetal, Aluminum, PTFE, Grillamid |
More information
- Product number: 1038140
- Manufacturer: Graco
- EAN: 00633955587540
- Weight: 9.661 kg
Further manufacturer information
Produktbroschüre
Produkthandbücher
- 332301K, Handbuch, Automatische Schmiermittelpumpe G3 Pro, Einbau, Einrichten, Wartung, Teile (Deutsch)
- 332301K, Handbuch, Automatische Schmiermittelpumpe G3 Pro, Einbau, Einrichten, Wartung, Teile (中文)
- 332301K, Handbuch, Automatische Schmiermittelpumpe G3 Pro, Einbau, Einrichten, Wartung, Teile (日本語)
- 332301K, Handbuch, Automatische Schmiermittelpumpe G3 Pro, Einbau, Einrichten, Wartung, Teile (Español)
- 332301K, Handbuch, Automatische Schmiermittelpumpe G3 Pro, Einbau, Einrichten, Wartung, Teile (Français)
- 332301K, Handbuch, Automatische Schmiermittelpumpe G3 Pro, Einbau, Einrichten, Wartung, Teile (Italiano)
- 332301K, Handbuch, Automatische Schmiermittelpumpe G3 Pro, Einbau, Einrichten, Wartung, Teile (Polski)
- 332301K, Handbuch, Automatische Schmiermittelpumpe G3 Pro, Einbau, Einrichten, Wartung, Teile (русский)
- 332301K, Handbuch, Automatische Schmiermittelpumpe G3 Pro, Einbau, Einrichten, Wartung, Teile (English)
Verkaufsliteratur
Reviews
Register
