Cutting system external mixing configuration ratio 13:1 with 7.6 m (25 ft) hose, chassis, mast and boom
€13,464.08*
% €15,840.09* (15% saved)Ready for shipping in 5-8 Werktage
To keep material costs low, the system has been designed so that no buffer tank is required and pump priming requires little solvent and resin. The system also includes a dual trigger function that allows operators to switch from wetting to cutting without dismantling the fibreglass cutter. By using only Graco components that are proven in a wide range of industries, you get a technically advanced, robust and durable solution.
Glass fibre chopper system for open moulds - Graco's fibre spraying components and systems make it easy to handle glass fibres and catalysed resin. The GFP system can be used to apply chopped glass fibre to open moulds. It provides precise dosing at the correct ratio with an easy transition from wetting to cutting.
Optimised mixing ratio stability
- Catalyst pump with adjustable mixing ratio - for quick and easy ratio changes without tools
- Precision linkage ensures superior mixing ratio control and uniform curing
Lower total cost of ownership
- Easy maintenance - fewer repair parts
- Long-life seals mean less downtime
- Pumps with longer maintenance intervals
- No pressure equalisation tank required - fewer parts, less solvent and less resin required to prime the pump
Optional DataTrak™ controller
- Resin consumption monitoring - helps ensure product quality by tracking resin consumption per piece, shift or day
- Tracks cycles for preventive maintenance schedule
- Displays flow rate in real time - prevents material waste due to worn nozzles
Roving management system
- Better guidance - less tangling, more uptime
Gravity fed catalyst system
- Keeps the catalyser pump filled for consistent delivery
New linkage and catalyst pump
- Newly developed pump holder enables significantly better control of the mixing ratio
- Enables infinitely variable adjustment of the catalyst percentage without tools
- Ensures the correct catalyst percentage and optimum results
- Deviations of no more than 1%
Balanced Graco NXT® air motor
- Provides the same output pressure on the up and down stroke - resulting in a more even spray pattern
- Shorter pump stroke for a better spray pattern
Control console
- User-friendly operator interface with closely spaced pressure gauges
Sturdy, lightweight chassis
- Easy manoeuvrability
- Robust, durable castors
| Air inlet size (inches): | 1/4 |
|---|---|
| Air inlet thread type: | NPT |
| Component A, inlet size (inch): | 3/8 |
| Component B, inlet size (inch): | 1-5/16 |
| Component B, thread gender: | External thread |
| Component B, thread type: | UN-2A |
| Gender of the air inlet thread: | Internal thread |
| Gender of the material inlet thread: | External thread |
| Gender of the material outlet thread: | Internal thread |
| Hose length (m): | 7.6 |
| Includes: | Hose, chassis, mast, boom |
| Material inlet thread type: | NPT |
| Material outlet thread type: | NPT |
| Maximum air supply pressure (bar): | 6.9 |
| Maximum air supply pressure (kPa): | 690 |
| Maximum delivery rate (L/min): | 5.68 |
| Maximum flow rate (cm³/min): | 5680 |
| Maximum inlet air pressure (psi): | 100 |
| Maximum operating pressure (MPa): | 9 |
| Maximum operating pressure (kPa): | 9000 |
| Maximum operating pressure (psi): | 1300 |
| Model: | FRP |
| Permissible operating pressure (bar): | 90 |
| Series: | XC |
| Size of the material inlet opening (inches): | 3/4 |
| Size of the material outlet opening (inches): | 3/4 |
| System ratio: | 13:1 |
| Total depth (cm): | 487.7 |
| Total depth (mm): | 4877 |
| Total height (cm): | 254 |
| Total height (mm): | 2540 |
| Total width (cm): | 365.8 |
| Total width (mm): | 3658 |
| Type: | Dosing system |
| Wetted material: | Stainless steel, carbide, UHMWPE, PTFE, acetal |
- Product number: 1032430
- Manufacturer: Graco
- EAN: 00755652825753
- Weight: 164.5 kg
- Length: 1100 mm
- Width: 980 mm
- Height: 2300 mm
Register
