Automatic fusion gun with solvent flushing
€6,032.59*
% €7,097.16* (15% saved)Ready for shipping in 5-8 Werktage
Whether you're spraying polyurea coatings or spray foam insulation, the Fusion MP gun can handle it all. The robust design offers you excellent mixing and material properties for the best results on site.
For high flow rates when spraying polyurethane foam and polyurea applications.
Fusion gun with mechanical cleaning (MP) - Developed for excellent mixing behaviour
- Suitable for thin film applications with very low output through to large applications with high flow rates and output by simply changing the mixing module and nozzle
- Easy mechanical cleaning - mixing modules and nozzles are cleaned with a drill
- Smoother finish and better atomisation
- Offers more powerful functions than all other guns with mechanical cleaning combined
- Durable mixing modules provide excellent mixing behaviour
- The improved mixing module and nozzle design provides excellent mixing behaviour and material
- excellent material properties and significantly reduces repair and maintenance costs
CeramTip
- Durable and easy to change
- Round and flat spray pattern
PolyCarballoy mixing module with adjustable front packing
- For a proven long service life
PolyCarballoy mixing module with adjustable front packing
- For a proven long service life
Contoured trigger
- Simple two-finger operation
Ergonomic grip
- The ergonomic handle increases operator comfort and reduces painter fatigue.
Flushing piston rod
- Easy to adjust, one-piece rod for longer life
Safety stop
- Manual on/off
| Air inlet size (inches): | 1/4 |
|---|---|
| Air inlet thread type: | NPT |
| Compatible material: | Non-flammable foam, polyurea |
| Component A, inlet size (cm): | 1.27 |
| Component A, inlet size (inch): | 1/2 |
| Component A, inlet size (mm): | 12.7 |
| Component A, inlet thread type: | UNF |
| Component B, inlet size (cm): | 142,875 |
| Component B, inlet size (inch): | 9/16 |
| Component B, inlet size (mm): | 142,875 |
| Component B, inlet thread type: | UNF |
| Component type: | multi-component |
| For use with: | Reactor equipment for spray foam and coatings |
| Gender of the air inlet thread: | Internal thread |
| Gun activation: | Hand- |
| Gun type: | Solvent flush spray gun |
| Gun weight (g): | 1680 |
| Gun weight (kg): | 1.68 |
| Gun weight (oz): | 59.2 |
| Maximum air inlet pressure (MPa): | 0.9 |
| Maximum air pressure (MPa): | 0.9 |
| Maximum air pressure (bar): | 9 |
| Maximum air pressure (kPa): | 900 |
| Maximum air pressure (psi): | 130 |
| Maximum air supply pressure (bar): | 9 |
| Maximum air supply pressure (kPa): | 900 |
| Maximum inlet air pressure (psi): | 130 |
| Maximum material operating pressure (MPa): | 24.2 |
| Maximum material operating pressure (bar): | 242 |
| Maximum material pressure (MPa): | 24.1 |
| Maximum material pressure (bar): | 241 |
| Maximum material pressure (kPa): | 24100 |
| Maximum material pressure (psi): | 3500 |
| Maximum material temperature (°C): | 93 |
| Minimum air supply pressure (MPa): | 0.55 |
| Minimum air supply pressure (bar): | 5.5 |
| Minimum air supply pressure (kPa): | 550 |
| Minimum air supply pressure (psi): | 80 |
| Model: | Fusion MP |
| Noise pressure level, (dB(A)): | 70 |
| Permissible operating overpressure (psi): | 3500 |
| Series: | Specialty |
| Size of the air inlet (cm): | 635 |
| Size of the air inlet (mm): | 6.35 |
| Sound level, (dB(A)): | 79.9 |
| Total height (cm): | 20.6 |
| Total height (mm): | 206 |
| Total length (cm): | 22.8 |
| Total length (mm): | 228 |
| Total width (cm): | 8.9 |
| Total width (mm): | 89 |
| Type: | spray gun |
- Product number: 1034311
- Manufacturer: Graco
- EAN: 00633955074729
- Weight: 2.899 kg
- Length: 427 mm
- Width: 335 mm
- Height: 183 mm
Register
