Manufacturer no.:
G03W11
3:1 complete air spray system 125 cm³, wall-mounted, with electrostatic Pro Xp60 spray gun, pump/gun air control, spray gun material and air hose; material filter/material regulator
€7,767.49*
% €11,949.98* (35% saved)Ready for shipping in 5-8 Werktage
Also interesting
Product information
Choose the right solution for your finishing applications with the Merkur low-pressure complete units. The Merkur low-pressure piston pump is equipped with advanced air spray technology.
- The Pro Xp manual electrostatic air spray gun consistently achieves high transfer efficiency for class A paint finishes. Thanks to its low profile and internal power supply, there are no heavy cables to slow you down.
- The displacement pump offers the best solution for quiet, low-pulsation operation.
- The fluid regulator and fluid filter provide consistent fluid flow.
- The air pressure control panel, which is conveniently located for the operator, makes it easy to adjust and monitor.
- The wall-mounted configuration offers easy access for data monitoring and control.
| Assembly: | Wall mounting |
|---|---|
| Gun included: | 1 |
| Gun technology: | Electrostatic |
| Gun type: | Electrostatics |
| Includes: | Pump and gun air controls, gun fluid and air hose, suction tube kit, fluid filter, fluid regulator |
| Material inlet thread type: | NPT |
| Material outlet size (cm): | 1.27 |
| Material outlet size (mm): | 12.7 |
| Material outlet thread type: | NPT |
| Maximum air pressure (bar): | 3.5 |
| Maximum air pressure (kPa): | 350 |
| Maximum air pressure (psi): | 50 |
| Maximum delivery rate (L/min): | 7.5 |
| Maximum hose length (m): | 7.6 |
| Maximum operating pressure (MPa): | 0.8 |
| Maximum operating pressure (psi): | 120 |
| Maximum operating temperature (°C): | 49 |
| Model: | Mercury |
| Permissible operating pressure (bar): | 8.3 |
| Pistol model: | Pro Xp 60 kV Standard |
| Print type: | Low pressure |
| Product type: | Complete spraying device |
| Pump type: | Pneumatic piston pump |
| Size of the material inlet opening (cm): | 2.54 |
| Size of the material inlet opening (inches): | 1 |
| Size of the material inlet opening (mm): | 25.4 |
| Size of the material outlet opening (inches): | 1/2 |
| Spraying technology: | Electrostatics |
| Standards met:: | FM tested, ATEX, CE |
| Supply voltage: | Air |
| Technology type: | Air spraying |
| Transmission ratio of the pump: | 3:1 |
| Type: | Air powered sprayer |
| Wetted material: | Stainless steel, tungsten carbide, UHMWPE, PTFE, PEEK, FEP, acetal, nylon, polyethylene |
More information
- Product number: 1034833
- Manufacturer: Graco
- EAN: 00755652956938
Reviews
Register
