SATAjet X 5500 HVLP DIGITAL bar nozzle 1.2 O RPS multi-purpose cup 0.6 l / 0.9 l (1 each), swivel joint
€702.96*
% €1,148.35* (38.79% saved)Express processing: Shipping within 24 hours
Two paths to perfect results: HVLP and RP®
The "extra-economical" SATAjet X 5500 HVLP achieves particularly high transfer rates with its low-pressure technology.
The "extra-fast" SATAjet X 5500 RP for maximum working speed with optimised high-pressure technology and low overspray.
Both versions are highly flexible, meet the highest standards for painting results and significantly exceed the transfer rates of 65% required by the VOC guideline.
Top in all areas of application – SATAjet X 5500
SATAjet X 5500 allows you to achieve the highest surface quality: when painting cars, commercial vehicles, furniture, yachts or high-quality industrial parts, for example – with all types of paint.
Your SATA dealer or our website will be happy to help you select the right nozzle, whether for base, clear or uni coats: www.sata.com/SATAjetX5500
Revolutionary. Economical. Quiet. Logical.
The revolutionary nozzle system
Sophisticated paint systems and new application recommendations create new possibilities, but also present the user with challenges. With its new X-nozzle system, the SATAjet X 5500 sets a new standard for the future.
The nozzle system is simple and logical: the two proven technologies – namely HVLP and RP – remain.
For each of them, there are "I" and "O" nozzle sets.
With increasing nozzle size in the respective technology (HVLP/RP) and spray pattern ("I" or "O"), the material ejection also increases constantly – this means that the respective spray height and width remain the same over the entire spectrum. This provides the user with a transparent and logical system that gives them clear and structured decision-making options.
The "I" nozzles have an elongated spray pattern with a short run-out zone and a drier spray core, which is ideal for lower application speeds and offers maximum control when painting. The layer thickness per spray pass is slightly lower for the same nozzle size compared to an "O" nozzle.
- Stretched fan shape with little run-out zone
- Improved control during application
- Reduced layer application per spray pass compared to the previous or "O" nozzle
The "O" nozzles have an oval spray pattern with a larger run-out zone and a wet spray core, which is suitable for higher application speeds but offers slightly less control when painting. The layer thickness per spray pass is slightly higher with the same nozzle size compared to an "I" nozzle.
- Oval fan shape with larger run-out zone
- Wet spray core for a higher working speed
- Slightly higher layer application per spray pass than with the "I" nozzle
Advantages
- Revolutionary: the atomisation of the X-nozzles sets new standards
- Noticeably quieter: optimised flow geometry of the Whisper Nozzle™ reduces noise in the relevant frequency ranges
- Individual: Suitable for every application requirement, such as the properties of the paint system, climatic conditions or painting habits (working speed/control)
- Precise: Optimised material distribution for a more even and finer atomisation in both spray variants
- Low maintenance: No air distribution ring required, thus enabling easier and faster cleaning
- Logical: constant spray dimensions for all nozzle sizes (within the respective technology) with evenly increasing material throughput
- Efficient: A considerable amount of material can be saved with the same application method
What are the advantages of the X-nozzle system?
Depending on the properties of the paint system, the climatic conditions and the painting habits, the painter can select the spray gun with the appropriate nozzle set for his individual requirements. The logical structure of the system makes it easy to make the right decisions to achieve an optimal painting result.
What else is new?
Thanks to the new paint and air nozzles and the optimised air distribution in the gun body, the air distribution ring can now be dispensed with. In addition, the noise level of this whisper nozzle has been noticeably reduced during application, giving the painter a softer, more pleasant feeling when painting. And best of all: the X-nozzle gun uses less paint!
Spray patterns
To achieve an optimal spray pattern without any compromises, many more factors than just ambient temperature and humidity must be considered.
The selected paint material with the corresponding additives, the size of the object, the recommended layer thickness, the individual painting habits, such as working speed or control, also play an important role in the selection of a nozzle.
SATAjet X 5500, perfect in every detail
To determine the appropriate nozzle, the painter has the following tools at his disposal:
- SATA website: www.sata.com/SATAjetX5500
- SATA Spray Finder App: www.sata.com/nozzlefinder
Suitable areas of application
Technical Information - RP Downloads
- Product number: 1010114
- Manufacturer: SATA
- EAN: 4027533239338
- Weight: 0.923 kg
- Length: 226 mm
- Width: 160 mm
- Height: 128 mm
Register
