02/10/2025

Colad Polyester Knitted Gloves – Perfect Protection for Assembly & Preparation

Practical Guide

Colad Polyester Knitted Gloves – the perfect work gloves for assembly, disassembly & preparation

Breathable, PU-coated for grip, and tested to EN 388:2016+A1:2018 – ideal for prep work and light sanding jobs.

Anyone assembling or dismantling components, preparing parts, or doing light sanding needs hand protection with a secure grip and high comfort. The Colad Polyester Knitted Gloves deliver exactly that: an elastic cuff for a snug fit, PU coating on fingers/palm for grip, and a durable, breathable polyester knit – comfortable even during longer use.

EN 388:2016+A1:2018

Performance levels: 3 1 2 1 X (Abrasion / Cut / Tear / Puncture / TDM)

PU Grip

PU coating on fingers & palm for controlled handling.

Comfort

Elastic cuff, airy knit – comfortable to wear.

Product Overview

Size	Article No.	Color	Application	Features
M	532000	White	Assembly, disassembly, prep work, light sanding	PU coating; breathable polyester
L	532002	Black	Same as above	Elastic cuff, snug fit
XL	532004	Blue	Same as above	Large movement range, comfortable wear

Note: Packaging units – 12 pairs/bag, 120 pairs/carton (reference value).

Tip: For painting tasks with chemical contact, use Colad Nitrile or Neoprene gloves; the polyester knitted gloves are designed for mechanical risks and prep steps.

Order Colad Polyester Knitted Gloves now

Recommended Basic Settings (Reference)

Standard/Performance: EN 388:2016+A1:2018 – Levels 3 / 1 / 2 / 1 / X
Material: Polyester knit with PU coating (fingers & palm)
Fit: Elastic cuff, close fit for precision handling
Sizes/Color code: M (white), L (black), XL (blue)
CE & Category: CE 0075, PPE Category II (EU) 2016/425

All details are reference values and may vary depending on usage conditions.

Professional Workflow (5–7 steps)

Select size: Choose M/L/XL to fit the hand (snug but not tight).
Visual inspection: Check gloves for damage before use.
Wear & adjust: Place cuff neatly, smooth out fingertips for best tactile feel.
Use: Perform assembly/disassembly, prep, light sanding with secure PU grip.
Short breaks: Store gloves dry, avoid direct sun – air them during breaks.
After use: Inspect again; discard damaged pairs properly.

Troubleshooting

Poor grip

Keep gloves dry/clean – PU grip works best dry.
If in contact with liquids, switch to suitable chemical gloves.

Too warm/sweaty

Take short breaks; air out gloves.
Avoid folds at fingertips; use breathable knit structure.

Wrong size

If too loose → go one size smaller.
If too tight → go one size bigger.

Premature wear

Check application (not for welding/grinding).
Choose correct glove type for chemicals/painting (Nitrile/Neoprene).

Maintenance & Care

Inspect visually before each use (seams, coating, cuff).
Store dry, clean, ventilated – away from direct sunlight.
Performance may change after washing/extended use – replace if needed.
Not suitable for welding or heavy grinding.
Dispose properly once damaged; follow local regulations.

FAQ

What tasks are the gloves designed for?
Assembly, disassembly, preparation and light sanding – protection against mechanical risks.

What sizes are available?
M, L, XL – with color codes: White (M), Black (L), Blue (XL).

Which standard values apply?
EN 388:2016+A1:2018 – Levels 3/1/2/1/X.

Are they chemical-resistant?
They are designed primarily for mechanical work. For chemical exposure, use Colad Nitrile or Neoprene gloves.

How should I store the gloves?
Clean, dry, ventilated and protected from direct sunlight.

Conclusion: If you need secure grip, comfort and proven protection during preparation, the Colad Polyester Knitted Gloves are the compact, economical solution – perfect for assembly/disassembly and precise handling in daily work.